AppSuite:Configuration properties 7.4.1

This information is valid from 7.4.1

This is an overview of all configuration parameters for the AppSuite backend. By default, this list is sorted by the .properties files they appear in. Yet for most parameters, it does not really matter in which file are found. This does not apply to some core configuration files which are explicitly loaded by name. For these, you cannot re-define the value in another file:

AdminUser.properties, filestorage.properties, Group.properties, mailfilter.properties, ModuleAccessDefinitions.properties, recaptcha.properties, recaptcha_options.properties, Resource.properties, RMI.properties, Sql.properties

Key	Default value	Comment	File
USER_STORAGE	com.openexchange.admin.storage.mysqlStorage.OXUserMySQLStorage		AdminDaemon.properties:11
GROUP_STORAGE	com.openexchange.admin.storage.mysqlStorage.OXGroupMySQLStorage		AdminDaemon.properties:12
RESOURCE_STORAGE	com.openexchange.admin.storage.mysqlStorage.OXResourceMySQLStorage		AdminDaemon.properties:13
CONCURRENT_JOBS	2	how many jobs should be executed concurrently	AdminDaemon.properties:16
MASTER_AUTHENTICATION_DISABLED	false	Disabling authentication for system calls like context/server etc. creation! ONLY USE THIS SWITCH IF YOU EXACTLY KNOW WHAT YOU DO!!!	AdminDaemon.properties:3
CONTEXT_AUTHENTICATION_DISABLED	false	Disabling authentication for context calls like user/group etc. creation! This also disables authentication for calls which a "normal" user can make like change his own data or get his own data! ONLY USE THIS SWITCH IF YOU EXACTLY KNOW WHAT YOU DO!!!	AdminDaemon.properties:9
CHECK_USER_UID_REGEXP	[$@%\\.+a-zA-Z0-9_-]		AdminUser.properties:10
DRAFTS_MAILFOLDER_IT_IT	Bozze		AdminUser.properties:100
SPAM_MAILFOLDER_IT_IT	Posta Indesiderata		AdminUser.properties:101
CONFIRMED_SPAM_MAILFOLDER_IT_IT	Posta indesiderata accertata		AdminUser.properties:102
CONFIRMED_HAM_MAILFOLDER_IT_IT	Posta attendibile accertata		AdminUser.properties:103
SENT_MAILFOLDER_ZH_CN	\u5df2\u53d1\u9001\u90ae\u4ef6		AdminUser.properties:107
TRASH_MAILFOLDER_ZH_CN	\u5783\u573e\u7b52		AdminUser.properties:108
DRAFTS_MAILFOLDER_ZH_CN	\u8349\u7a3f		AdminUser.properties:109
SPAM_MAILFOLDER_ZH_CN	\u5783\u573e\u90ae\u4ef6		AdminUser.properties:110
CONFIRMED_SPAM_MAILFOLDER_ZH_CN	\u5df2\u786e\u8ba4\u7684\u5783\u573e\u90ae\u4ef6		AdminUser.properties:111
CONFIRMED_HAM_MAILFOLDER_ZH_CN	\u5df2\u786e\u8ba4\u7684\u6b63\u5e38\u90ae\u4ef6		AdminUser.properties:112
SENT_MAILFOLDER_CS_CZ	Odeslan\u00e9 polo\u017eky		AdminUser.properties:116
TRASH_MAILFOLDER_CS_CZ	Ko\u0161		AdminUser.properties:117
DRAFTS_MAILFOLDER_CS_CZ	Koncepty		AdminUser.properties:118
SPAM_MAILFOLDER_CS_CZ	Spam		AdminUser.properties:119
CONFIRMED_SPAM_MAILFOLDER_CS_CZ	Potvrzen\u00fd spam		AdminUser.properties:120
CONFIRMED_HAM_MAILFOLDER_CS_CZ	Potvrzen\u00e1 norm\u00e1ln\u00ed po\u0161ta		AdminUser.properties:121
SENT_MAILFOLDER_HU_HU	Elk\u00fcld\u00f6tt elemek		AdminUser.properties:125
TRASH_MAILFOLDER_HU_HU	T\u00f6r\u00f6lt elemek		AdminUser.properties:126
DRAFTS_MAILFOLDER_HU_HU	Piszkozatok		AdminUser.properties:127
SPAM_MAILFOLDER_HU_HU	Lev\u00e9lszem\u00e9t		AdminUser.properties:128
CONFIRMED_SPAM_MAILFOLDER_HU_HU	Elfogadott k\u00e9retlen		AdminUser.properties:129
AUTO_TO_LOWERCASE_UID	false	this will lowercase the uid	AdminUser.properties:13
CONFIRMED_HAM_MAILFOLDER_HU_HU	Elfogadott \u00e1l-k\u00e9retlen		AdminUser.properties:130
SENT_MAILFOLDER_SK_SK	Odoslan\u00e9 polo\u017eky		AdminUser.properties:134
TRASH_MAILFOLDER_SK_SK	K\u00f4\u0161		AdminUser.properties:135
DRAFTS_MAILFOLDER_SK_SK	Rozp\u00edsan\u00e9		AdminUser.properties:136
SPAM_MAILFOLDER_SK_SK	Spam		AdminUser.properties:137
CONFIRMED_SPAM_MAILFOLDER_SK_SK	Potvrden\u00fd spam		AdminUser.properties:138
CONFIRMED_HAM_MAILFOLDER_SK_SK	Potvrden\u00e9 ako nie spam		AdminUser.properties:139
SENT_MAILFOLDER_LV_LV	Nos\u016Bt\u012Bt\u0101s vien\u012Bbas		AdminUser.properties:143
TRASH_MAILFOLDER_LV_LV	Atkritumi		AdminUser.properties:144
DRAFTS_MAILFOLDER_LV_LV	Melnraksti		AdminUser.properties:145
SPAM_MAILFOLDER_LV_LV	M\u0113stules		AdminUser.properties:146
CONFIRMED_SPAM_MAILFOLDER_LV_LV	Apstiprin\u0101ta "m\u0113stule"		AdminUser.properties:147
CONFIRMED_HAM_MAILFOLDER_LV_LV	Apstiprin\u0101ts "ham"		AdminUser.properties:148
USERNAME_CHANGEABLE	false	WARNING: Changing the username might have impact on external systems like imap server that allows acls to be set. Imap ACLS usually use symbolic names so when changing the user name without changing the ACL breaks the ACL. open-xchange-admin will NOT change those ACLS, so DO NOT CHANGE THIS SETTING ON OX Express	AdminUser.properties:20
PRIMARY_MAIL_UNCHANGEABLE	false	Here you can set whether the primary mail address can be changed or not. If set to false, it is possible to change the primary mail address. Only change, if you know what you are doing (Outlook might not work anymore under certain circumstances) Default is: false	AdminUser.properties:27
DEFAULT_PASSWORD_MECHANISM	SHA	specify the default password mechanism to use possible values: CRYPT / SHA / BCRYPT	AdminUser.properties:3
SENT_MAILFOLDER_DE_DE	Gesendete Objekte	default mail folder fallback if not sent by rmi client:	AdminUser.properties:30
TRASH_MAILFOLDER_DE_DE	Papierkorb		AdminUser.properties:31
DRAFTS_MAILFOLDER_DE_DE	Entw\u00fcrfe		AdminUser.properties:32
SPAM_MAILFOLDER_DE_DE	Spam		AdminUser.properties:33
CONFIRMED_SPAM_MAILFOLDER_DE_DE	confirmed-spam		AdminUser.properties:34
CONFIRMED_HAM_MAILFOLDER_DE_DE	confirmed-ham		AdminUser.properties:35
SENT_MAILFOLDER_EN_US	Sent Items		AdminUser.properties:37
TRASH_MAILFOLDER_EN_US	Trash		AdminUser.properties:38
DRAFTS_MAILFOLDER_EN_US	Drafts		AdminUser.properties:39
SPAM_MAILFOLDER_EN_US	Spam		AdminUser.properties:40
CONFIRMED_SPAM_MAILFOLDER_EN_US	confirmed-spam		AdminUser.properties:41
CONFIRMED_HAM_MAILFOLDER_EN_US	confirmed-ham		AdminUser.properties:42
SENT_MAILFOLDER_FR_FR	Objets envoy\u00e9s		AdminUser.properties:44
TRASH_MAILFOLDER_FR_FR	Corbeille		AdminUser.properties:45
DRAFTS_MAILFOLDER_FR_FR	Brouillons		AdminUser.properties:46
SPAM_MAILFOLDER_FR_FR	Pourriel		AdminUser.properties:47
CONFIRMED_SPAM_MAILFOLDER_FR_FR	pourriel-confirme		AdminUser.properties:48
CONFIRMED_HAM_MAILFOLDER_FR_FR	non-pourriel-confirme		AdminUser.properties:49
SENT_MAILFOLDER_NL_NL	Verzonden items		AdminUser.properties:53
TRASH_MAILFOLDER_NL_NL	Prullenbak		AdminUser.properties:54
DRAFTS_MAILFOLDER_NL_NL	Concepten		AdminUser.properties:55
SPAM_MAILFOLDER_NL_NL	Spam		AdminUser.properties:56
CONFIRMED_SPAM_MAILFOLDER_NL_NL	bevestigde spam		AdminUser.properties:57
CONFIRMED_HAM_MAILFOLDER_NL_NL	bevestigde ham		AdminUser.properties:58
UID_NUMBER_START	-1	set to > 0 to use the uidnumber feature	AdminUser.properties:6
SENT_MAILFOLDER_SV_SV	Skickat		AdminUser.properties:62
TRASH_MAILFOLDER_SV_SV	Papperskorgen		AdminUser.properties:63
DRAFTS_MAILFOLDER_SV_SV	Utkast		AdminUser.properties:64
SPAM_MAILFOLDER_SV_SV	Skr\u00E4ppost		AdminUser.properties:65
CONFIRMED_SPAM_MAILFOLDER_SV_SV	bekr\u00E4ftad-skr\u00E4ppost		AdminUser.properties:66
CONFIRMED_HAM_MAILFOLDER_SV_SV	felaktigt-bekr\u00E4ftad-spam		AdminUser.properties:67
SENT_MAILFOLDER_ES_ES	Elementos enviados		AdminUser.properties:71
TRASH_MAILFOLDER_ES_ES	Papelera		AdminUser.properties:72
DRAFTS_MAILFOLDER_ES_ES	Borradores		AdminUser.properties:73
SPAM_MAILFOLDER_ES_ES	Correo no deseado		AdminUser.properties:74
CONFIRMED_SPAM_MAILFOLDER_ES_ES	correo basura confirmado		AdminUser.properties:75
CONFIRMED_HAM_MAILFOLDER_ES_ES	correo leg\u00EDtimo confirmado		AdminUser.properties:76
SENT_MAILFOLDER_JA_JP	\u9001\u4FE1\u6E08\u30A2\u30A4\u30C6\u30E0		AdminUser.properties:80
TRASH_MAILFOLDER_JA_JP	\u524A\u9664\u6E08\u307F\u30A2\u30A4\u30C6\u30E0		AdminUser.properties:81
DRAFTS_MAILFOLDER_JA_JP	\u4E0B\u66F8\u304D		AdminUser.properties:82
SPAM_MAILFOLDER_JA_JP	\u8FF7\u60D1\u30E1\u30FC\u30EB		AdminUser.properties:83
CONFIRMED_SPAM_MAILFOLDER_JA_JP	\u8FF7\u60D1\u30E1\u30FC\u30EB\uFF08\u78BA\u8A8D\u6E08\uFF09		AdminUser.properties:84
CONFIRMED_HAM_MAILFOLDER_JA_JP	\u4E00\u822C\u30E1\u30FC\u30EB\uFF08\u78BA\u8A8D\u6E08\uFF09		AdminUser.properties:85
SENT_MAILFOLDER_PL_PL	Elementy wys\u0142ane		AdminUser.properties:89
CHECK_USER_UID_FOR_NOT_ALLOWED_CHARS	true	this will check the user name using the check below	AdminUser.properties:9
TRASH_MAILFOLDER_PL_PL	Kosz		AdminUser.properties:90
DRAFTS_MAILFOLDER_PL_PL	Szkice		AdminUser.properties:91
SPAM_MAILFOLDER_PL_PL	Spam		AdminUser.properties:92
CONFIRMED_SPAM_MAILFOLDER_PL_PL	Potwierdzony spam		AdminUser.properties:93
CONFIRMED_HAM_MAILFOLDER_PL_PL	Potwierdzony nie-spam		AdminUser.properties:94
SENT_MAILFOLDER_IT_IT	Posta inviata		AdminUser.properties:98
TRASH_MAILFOLDER_IT_IT	Cestino		AdminUser.properties:99
verbosity	1	verbosity: The level of messages for status/debug (messages go to standard output). The setting here is for your own local catalogs. The verbosity of Forrest's core catalogs is controlled via main/webapp/WEB-INF/cocoon.xconf The following messages are provided ... 0 = none 1 = ? (... not sure yet) 2 = 1+, Loading catalog, Resolved public, Resolved system 3 = 2+, Catalog does not exist, resolvePublic, resolveSystem 10 = 3+, List all catalog entries when loading a catalog (Cocoon also logs the "Resolved public" messages.)	CatalogManager.properties:41
catalogs	../resources/schema/catalog.xcat	catalogs ... list of additional catalogs to load (Note that Apache Forrest will automatically load its own default catalog from main/webapp/resources/schema/catalog.xcat) Use either full pathnames or relative pathnames. pathname separator is always semi-colon (;) regardless of operating system directory separator is always slash (/) regardless of operating system	CatalogManager.properties:49
relative-catalogs	no	relative-catalogs If false, relative catalog URIs are made absolute with respect to the base URI of the CatalogManager.properties file. This setting only applies to catalog URIs obtained from the catalogs property in the CatalogManager.properties file Example: relative-catalogs=[yes|no]	CatalogManager.properties:57
GID_NUMBER_START	-1	set to higher than 0 to enable gid number feature	Group.properties:2
CHECK_GROUP_UID_FOR_NOT_ALLOWED_CHARS	true	this will check the group name using the check below	Group.properties:5
CHECK_GROUP_UID_REGEXP	[ $@%\\.+a-zA-Z0-9_-]		Group.properties:6
AUTO_TO_LOWERCASE_UID	false	this will lowercase the uid	Group.properties:9
webmail_plus	contacts,webmail	this are the deprecated definitions of module access combinations. please use the newly defined sets.	ModuleAccessDefinitions.properties:40
pim_plus	contacts,webmail,calendar,tasks		ModuleAccessDefinitions.properties:41
groupware_plus	contacts,webmail,calendar,delegatetask,tasks,editpublicfolders,infostore,publicfoldereditable,readcreatesharedfolders		ModuleAccessDefinitions.properties:42
premium	contacts,webmail,calendar,delegatetask,tasks,editpublicfolders,infostore,publicfoldereditable,readcreatesharedfolders,ical,vcard,webdav,webdavxml		ModuleAccessDefinitions.properties:43
groupware	calendar,contacts,delegatetask,editpublicfolders,forum,ical,infostore,publicfoldereditable,pinboardwrite,projects,readcreatesharedfolders,rssbookmarks,rssportal,tasks,vcard,webdav,webdavxml,webmail,editresource,editgroup,editpassword,collectemailaddresses,multiplemailaccounts,subscription,publication	PLEASE Update accordingly when UPDATING "all" level! Includes all modules except mobility,	ModuleAccessDefinitions.properties:47
webmail	webmail,contacts,globaladdressbookdisabled,collectemailaddresses,editpassword		ModuleAccessDefinitions.properties:50
pim	webmail,calendar,contacts,tasks,globaladdressbookdisabled,collectemailaddresses,multiplemailaccounts,subscription,publication,editpassword		ModuleAccessDefinitions.properties:51
pim_infostore	webmail,calendar,contacts,tasks,infostore,webdav,globaladdressbookdisabled,collectemailaddresses,multiplemailaccounts,subscription,publication,editpassword		ModuleAccessDefinitions.properties:52
pim_mobility	webmail,calendar,contacts,tasks,syncml,usm,activesync,globaladdressbookdisabled,collectemailaddresses,multiplemailaccounts,subscription,publication,editpassword		ModuleAccessDefinitions.properties:53
groupware_standard	webmail,calendar,contacts,infostore,tasks,webdav,ical,vcard,readcreatesharedfolders,delegatetask,editpublicfolders,editgroup,editresource,editpassword,collectemailaddresses,multiplemailaccounts,subscription,publication	Groupware Standard always gets new features except mobility and OXtender.	ModuleAccessDefinitions.properties:55
groupware_premium	webmail,calendar,contacts,infostore,tasks,webdav,webdavxml,ical,vcard,syncml,usm,olox20,activesync,readcreatesharedfolders,delegatetask,editpublicfolders,editgroup,editresource,editpassword,collectemailaddresses,multiplemailaccounts,subscription,publication		ModuleAccessDefinitions.properties:56
all	webmail,calendar,contacts,infostore,tasks,webdav,webdavxml,ical,vcard,syncml,usm,olox20,activesync,readcreatesharedfolders,delegatetask,editpublicfolders,editgroup,editresource,editpassword,publicfoldereditable,collectemailaddresses,multiplemailaccounts,subscription,publication	By default 'all' is the same as 'groupware_premium', except the right 'publicfoldereditable'. As this right only applies to context administrators, 'all' is internally equivalent to 'groupware_premium' for normal users.	ModuleAccessDefinitions.properties:59
CHECK_RES_UID_FOR_NOT_ALLOWED_CHARS	true	this will check the resource name using the check below	Resource.properties:2
CHECK_RES_UID_REGEXP	[ $@%\\.+a-zA-Z0-9_-]		Resource.properties:3
AUTO_TO_LOWERCASE_UID	false	this will lowercase the uid	Resource.properties:6
SERVLET_POOL_SIZE	1	initial number of instances held in memory for each available single threaded servlet (single threaded servlets are deprecated and are not used by the open-xchange server)	ajp.properties:13
AJP_SERVER_THREAD_SIZE	1	Number of AJP server threads which create a client socket on an incoming request. This is the number of threads processing new opened AJP sockets. AJP sockets are kept alive by default therefore only one thread is recommended	ajp.properties:18
AJP_LISTENER_POOL_SIZE	1	AJP listener pool size number of initially created AJP listeners for processing incoming AJP requests This pool does grow dynamically but does not go below.	ajp.properties:23
AJP_LISTENER_READ_TIMEOUT	60000	The amount of time in milliseconds a listener is going to wait (or block) while waiting to read the initial bytes from web server from input stream 0 stands for unlimited and should not be changed because if the server does close connections here the sticky sessions would break.	ajp.properties:29
AJP_KEEP_ALIVE_TIME	20000	DEFINE THE AJP KEEP-ALIVE TIME. IF An INCOMIN REQUEST'S PROCESSING TIME EXCEEDS THIS VALUE, A KEEP-ALIVE IS FLUSHED TO WEB SERVER TO AVOID POSSIBLE TIMEOUTS ON SOCKET CONNECTION. A VALUE OF ZERO OR LESS DISABLES KEEP-ALIVE HEART BEAT	ajp.properties:34
AJP_SERVLET_CONFIG_DIR	null	DEFINE THE DIRECTORY PATH THAT CARRIES SERVLETS' CONFIGURATION PROPERTIES. THE PROPERTIES DEFINED FOR A SERVLET CONSIST OF THREE PARTS: 1. THE GLOBAL PROPERTIES DIRECTLY LOCATED IN DIRECTORY PATH SPECIFIED BY THIS PROPERTY. THESE PROPERTIES APPLY TO ALL SERVLET INSTANCES 2. THE PATH-SPECIFIC PROPERTIES DEFINED IN A SUBDIRECTORY EQUAL TO SERVLET'S PATH 3. THE CLASS-SPECIFIC PROPERTIES DEFINED IN A FILE WHOSE NAMING IS EQUAL TO SERVLET CLASS' CANONICAL NAME WITH THE COMMON ".properties" PROPERTY FILE EXTENSION IF THIS VALUE IS LEFT TO "null" THIS PROPERTY FALLS BACK TO DEFAULT PATH: "/opt/open-xchange/etc/servletConfig"	ajp.properties:47
AJP_LOG_FORWARD_REQUEST	FALSE	Logs corresponding AJP forward request if an unexpected empty body request is detected	ajp.properties:51
AJP_BACKLOG	0	Specify the backlog for opened AJP server socket Default is zero; meaning using JVM's default backlog setting	ajp.properties:8
com.openexchange.app.descriptions.path	/var/www/webdesktop/AppForge		appstore.properties:1
io.ox/core//theme	default		appsuite.properties:1
io.ox/core/settingOptions//themes/default	Default Theme		appsuite.properties:3
translator.get_request	com.openexchange.index.solr.internal.querybuilder.translators.IdListTranslator	Translator configuration	attachment-querybuilder.properties:12
get_request.id_field	uuid		attachment-querybuilder.properties:13
translator.all_request	com.openexchange.index.solr.internal.querybuilder.translators.AllTranslator		attachment-querybuilder.properties:15
translator.custom	com.openexchange.index.solr.internal.attachments.translators.CustomTranslator		attachment-querybuilder.properties:17
field.param6	id	Field configuration	attachment-querybuilder.properties:2
handler.simple	simpleSearch	Handler configuration	attachment-querybuilder.properties:5
handler.custom	customSearch		attachment-querybuilder.properties:6
handler.get_request	getSearch		attachment-querybuilder.properties:7
handler.all_request	allSearch		attachment-querybuilder.properties:8
handler.persons_and_topics	personsAndTopics		attachment-querybuilder.properties:9
MAX_UPLOAD_SIZE	10485760		attachment.properties:6
com.openexchange.audit.logging.AuditFileHandler.enabled	true		audit.properties:1
com.openexchange.audit.logging.FileAccessLogging.enabled	false	Set to true to enable logging of file accesses and downloads	audit.properties:10
com.openexchange.audit.logging.AuditFileHandler.pattern	/var/log/open-xchange/audit.log		audit.properties:2
com.openexchange.audit.logging.AuditFileHandler.level	ALL		audit.properties:3
com.openexchange.audit.logging.AuditFileHandler.limit	2097152		audit.properties:4
com.openexchange.audit.logging.AuditFileHandler.count	99		audit.properties:5
com.openexchange.audit.logging.AuditFileHandler.formatter	java.util.logging.SimpleFormatter		audit.properties:6
com.openexchange.audit.logging.AuditFileHandler.append	true		audit.properties:7
LDAP_HOST	localhost		authplugin.properties:1
LDAP_BASE	dc=example,dc=org		authplugin.properties:2
LDAP_PORT	389		authplugin.properties:3
LDAP_SEARCH	(&(objectClass=oxdbObject)(uid=@USER@))	search query to get the users ldap dn ,@USER@ will be replaced by the username	authplugin.properties:5
LDAP_ATTRIBUTE	mailPrimaryAddress	which attribute should be parsed for the email adress (context=domainpart)	authplugin.properties:7
USE_POOL	false		authplugin.properties:8
AUTOCID_STORAGE	com.openexchange.admin.autocontextid.storage.mysqlStorage.OXAutoCIDMySQLStorage		autocid.properties:1
com.openexchange.mail.autoconfig.path	/opt/open-xchange/ispdb	Path to the local configuration files for mail domains. See https://developer.mozilla.org/en/Thunderbird/Autoconfiguration	autoconfig.properties:3
com.openexchange.mail.autoconfig.ispdb	https://live.mozillamessaging.com/autoconfig/v1.1/	The ISPDB is a central database, currently hosted by Mozilla Messaging, but free to use for any client. It contains settings for the world's largest ISPs. We hope that the database will soon have enough information to autoconfigure approximately 50% of our user's email accounts.	autoconfig.properties:8
type	t1.micro	Instance type, see http://aws.amazon.com/ec2/#instance	awsautoscaling.properties:11
securitygroups	sg-0d94a179	Security group which instances will use	awsautoscaling.properties:14
keyPair	jbauerdick	Keypair to use for ssh login	awsautoscaling.properties:17
launchconfiguration	ox-aws-autoscaling-configuration	Set name for launch configuration	awsautoscaling.properties:2
regions	eu-west-1a	Set the regions where the loadbalancer will be available	awsautoscaling.properties:20
loadbalancers	ox-aws-loadbalancer	Set name of the loadbalancer	awsautoscaling.properties:23
min	2	Minimun instances in autoscaling group	awsautoscaling.properties:26
max	10	Maximum instances in autoscaling group	awsautoscaling.properties:29
metrics	cpu,diskreadops,diskwriteops	Metrics that will be monitored (available: cpu, diskread, diskreadops, diskwrite, diskwriteops, networkin, networkout)	awsautoscaling.properties:32
gracetimes	120,120,120	Number of seconds that AWS will wait after an autoscaling event occurs before triggering another event, comma separated list, must be multiples of 60	awsautoscaling.properties:36
thresholds	80,20,10000,0,10000,0	Threshold for metrics, comma separated values for scaling up/down	awsautoscaling.properties:39
evalPeriods	300,120,60	Number of periods over which data is compared to thresholds, must be multiple of 60	awsautoscaling.properties:42
scaleup	2	Number of instances to start when scaleup policy is triggered	awsautoscaling.properties:45
scaledown	-1	Number of instances to stop when scaledown policy is triggered	awsautoscaling.properties:48
autoscaling	ox-aws-autoscaling-group	Set name for autoscaling group	awsautoscaling.properties:5
ami	ami-a1e7e1d5	Id of the AMI image	awsautoscaling.properties:8
com.openexchange.aws.ec2.placement	eu-west-1a	Set the zone where the loadbalancer will be available	awsec2.properties:11
com.openexchange.aws.ec2.securitygroup	sg-0d94a179	Security group which instances will use	awsec2.properties:14
com.openexchange.aws.ec2.imageId	ami-a1e7e1d5	Id of the AMI image	awsec2.properties:2
com.openexchange.aws.ec2.instanceType	t1.micro	Instance type, see http://aws.amazon.com/ec2/#instance	awsec2.properties:5
com.openexchange.aws.ec2.keyPair	jbauerdick	Keypair to use for ssh login	awsec2.properties:8
com.openexchange.aws.loadbalancing.name	ox-aws-loadbalancer	The loadbalancer's name	awsloadbalancing.properties:2
com.openexchange.aws.loadbalancing.https	false	Change to true, if loadbalancer should handle https requests	awsloadbalancing.properties:5
com.openexchange.aws.loadbalancing.zone	eu-west-1a	Set the zone where the loadbalancer will be available	awsloadbalancing.properties:8
com.openexchange.aws.s3.[filestoreID].endpoint		Specifies the endpoint (e.g. "ec2.amazonaws.com") or a full URL, including the protocol (e.g. "https://ec2.amazonaws.com") of the region specific AWS endpoint this client will communicate with. Defaults to "s3.amazonaws.com" if not defined.	awss3.properties:22
com.openexchange.aws.s3.[filestoreID].region	us-west-2	Configures the Amazon S3 region to use when creating new buckets. This value is also used to pre-configure the client when no specific endpoint is set. Possible values are "us-gov-west-1", "us-east-1", "us-west-1", "us-west-2", "eu-west-1", "ap-southeast-1", "ap-southeast-2", "ap-northeast-1" and "sa-east-1". Defaults to "us-west-2".	awss3.properties:29
com.openexchange.aws.s3.[filestoreID].accessKey		Configures the AWS access key to use. Required.	awss3.properties:32
com.openexchange.aws.s3.[filestoreID].secretKey		Configures the AWS secret key to use. Required.	awss3.properties:35
com.openexchange.aws.s3.[filestoreID].encryption	none	Optionally specifies which client-side encryption should be used. Current options include "none" for no encryption, or "rsa" for an RSA-based asymmetric encryption. Defaults to "none". Please note that depending on the used key length and Java runtime, one might need to replace the so-called "JCE Unlimited Strength Jurisdiction Policy Files" accordingly.	awss3.properties:43
com.openexchange.aws.s3.[filestoreID].encryption.rsa.keyStore		Specifies the path to the local keystore file (PKCS #12) containing the public-/private-key pair to use for encryption, e.g. "/opt/open-xchange/etc/cert/awss3.p12". Required if "com.openexchange.aws.s3.[filestoreID].encryption" is set to "rsa".	awss3.properties:49
com.openexchange.aws.s3.[filestoreID].encryption.rsa.password		Specifies the password used when creating the referenced keystore containing public-/private-key pair to use for encryption. Note that blank or null passwords are in violation of the PKCS #12 specifications. Required if "com.openexchange.aws.s3.[filestoreID].encryption" is set to "rsa".	awss3.properties:55
modules/com.openexchange.blackwhitelist/module	true	The following property enables the Black-/Whitelist GUI-Plugin	blackwhitelist_gui.properties:11
jcs.region.[REGIONNAME]	LTCP	It's important that cache entries don't get invalidated, since the cache may not be deterministic for LDAP contacts. Therefore, the properties 'MaxMemoryIdleTimeSeconds', 'MaxLifeSeconds' and 'IdleTime' should be set to '-1', while 'MaxObjects' should be configured large enough to hold all contacts from the directory.	cache.properties:13
jcs.region.[REGIONNAME].cacheattributes	org.apache.jcs.engine.CompositeCacheAttributes		cache.properties:14
jcs.region.[REGIONNAME].cacheattributes.MaxObjects	1000000		cache.properties:15
jcs.region.[REGIONNAME].cacheattributes.MemoryCacheName	org.apache.jcs.engine.memory.lru.LRUMemoryCache		cache.properties:16
jcs.region.[REGIONNAME].cacheattributes.UseMemoryShrinker	false		cache.properties:17
jcs.region.[REGIONNAME].cacheattributes.MaxMemoryIdleTimeSeconds	-1		cache.properties:18
jcs.region.[REGIONNAME].cacheattributes.ShrinkerIntervalSeconds	60		cache.properties:19
jcs.region.[REGIONNAME].cacheattributes.MaxSpoolPerRun	500		cache.properties:20
jcs.region.[REGIONNAME].elementattributes	org.apache.jcs.engine.ElementAttributes		cache.properties:21
jcs.region.[REGIONNAME].elementattributes.IsEternal	false		cache.properties:22
jcs.region.[REGIONNAME].elementattributes.MaxLifeSeconds	-1		cache.properties:23
jcs.region.[REGIONNAME].elementattributes.IdleTime	-1		cache.properties:24
jcs.region.[REGIONNAME].elementattributes.IsSpool	false		cache.properties:25
jcs.region.[REGIONNAME].elementattributes.IsRemote	false		cache.properties:26
jcs.region.[REGIONNAME].elementattributes.IsLateral	false		cache.properties:27
com.openexchange.caching.jcs.enabled	true	Specify whether JCS-based caching should be enabled Default is "true"	cache.properties:5
com.openexchange.caching.jcs.eventInvalidation	true	Configures how remote cache invalidation is done. Set to 'true' for cache events via the cache event messaging service, or to 'false' to stick with the JCS-internal lateral auxiliary cache configuration. Defaults to 'true'.	cache.properties:9
com.openexchange.caldav.interval.start	one_month	Appointments and tasks are available via the CalDAV interface if they fall into a configurable timeframe. This value specifies the start time of this interval, i.e. how far past appointments should be considered. More formal, this value defines the negative offset relative to the current date representing the minimum end time of appointments to be synchronized. Possible values are "one_month" (default), "one_year" and "six_months".	caldav.properties:13
com.openexchange.caldav.enabled	true	Whether CalDAV is enabled or not	caldav.properties:2
com.openexchange.caldav.interval.end	one_year	Appointments and tasks are available via the CalDAV interface if they fall into a configurable timeframe. This value specifies the end time of this interval, i.e. how far future appointments should be considered. More formal, this value defines the positive offset relative to the current date representing the maximum start time of appointments to be synchronized. Possible values are "one_year" (default) and "two_years".	caldav.properties:21
com.openexchange.caldav.url	https://[hostname]/caldav/[folderId]	Tells users where to find a caldav folder. This can be displayed in frontends. You can use the variables [hostname] and [folderId] If you chose to deploy caldav as a virtual host (say 'dav.open-xchange.com') use https://dav.open-xchange.com/caldav/[folderId] as the value If you are using user-agent sniffing use https://[hostname]/caldav/[folderId]	caldav.properties:29
com.openexchange.caldav.tree	0	Configures the ID of the folder tree used by the CalDAV interface	caldav.properties:5
cp_dayview_table.tmpl	calendar, printing		calendar.printing.properties:1
cp_monthview_list.tmpl	calendar, printing		calendar.printing.properties:2
cp_monthview_table.tmpl	calendar, printing		calendar.printing.properties:3
cp_weekview_table.tmpl	calendar, printing		calendar.printing.properties:4
cp_workweekview_table.tmpl	calendar, printing		calendar.printing.properties:5
com.openexchange.carddav.tree	0	Configures the ID of the folder tree used by the CardDAV interface	carddav.properties:11
com.openexchange.carddav.enabled	true	Whether CardDAV is enabled or not	carddav.properties:2
com.openexchange.carddav.exposedCollections	0	Controls which collections are exposed via the CardDAV interface. Possible values are '0', '1' and '2'. A value of '1' makes each visible folder available as a resource collection, while '2' only exposes an aggregated collection containing all contact resources from all visible folders. The default value '0' exposes either an aggregated collection or individual collections for each folder, depending on the client's user-agent that is matched against the pattern in 'userAgentForAggregatedCollection'.	carddav.properties:20
com.openexchange.carddav.userAgentForAggregatedCollection	.*CFNetwork.*Darwin.*|.*AddressBook.*CardDAVPlugin.*Mac_OS_X.*|.*Mac OS X.*AddressBook.*	Regular expression to match against the client's user-agent to decide whether the aggregated collection is exposed or not. The default pattern matches all known varieties of the Mac OS Addressbook client, that doesn't support multiple collections. Only used if 'exposedCollections' is set to '0'. The pattern is used case insensitive.	carddav.properties:27
com.openexchange.carddav.reducedAggregatedCollection	false	Specifies if all visible folders are used to create the aggregated collection, or if a reduced set of folders only containing the global addressbook and the personal contacts folders should be used. This setting only influences the aggregated collection that is used for clients that don't support multiple collections. Possible values are 'true' and 'false.	carddav.properties:34
com.openexchange.carddav.ignoreFolders		A comma-separated list of folder IDs to exclude from the synchronization. Use this to disable syncing of very large folders (e.g. the global address list in large contexts, which always has ID 6). By default, no folders are excluded.	carddav.properties:8
com.openexchange.passwordchange.script.shellscript	/bin/changepwd.sh	Script which updates the users passwd Must be executable (+x) and correct interpreter set (#!/bin/bash) Following values are passed by the servlet to the script: 1. --cid - Context ID 2. --username - Username of the logged in user 3. --userid - User ID of the logged in user 4. --oldpassword - Old user password 5. --newpassword - New user password see http://oxpedia.org/wiki/index.php?title=ChangePasswordExternal for some examples If script does not exit with status code 0 , an io-error is shown in the GUI. the following exit codes will display a defined error: 1: Cannot change password < %s >, see logfiles for details. 2: New password is too short 3: New password is too weak 4: Cannot find user 5: LDAP error	change_pwd_script.properties:25
com.openexchange.database.replicationMonitor	true	The following property allows to disable the replication monitor. This option is only useful if you have a MySQL master and slave setup. If the application code releases a connection to the MySQL master, a writing operation on the database is assumed. To be able to monitor the replication to the slave, a counter is increased after releasing the connection. Reading this counter from the slave indicates, the write operation is not replicated yet and instead of a slave connection a master connection is then used to read data. This prevents data reading inconsistencies. Unfortunately will this produce additional IO load on MySQL master and slave. This mechanism can be disabled with the following property. This saves IO load but it may cause data inconsistencies. Especially newly created objects can disappear in the following refresh requests.	configdb.properties:102
com.openexchange.database.checkWriteCons	false	If com.openexchange.database.checkWriteCons is set to true, a warning will be logged every time when a writable connection is used to perform only SELECT queries. Default is 'false' to avoid flooding of log files.	configdb.properties:106
readProperty.1	user=openexchange	username for the database user	configdb.properties:11
readProperty.2	password=secret	password for the database user	configdb.properties:13
readProperty.3	useUnicode=true	The driver properties should be kept at their defaults.	configdb.properties:15
readProperty.4	characterEncoding=UTF-8		configdb.properties:16
readProperty.5	autoReconnect=true		configdb.properties:17
readProperty.6	useServerPrepStmts=false		configdb.properties:18
readProperty.7	useTimezone=true		configdb.properties:19
readProperty.8	serverTimezone=UTC		configdb.properties:20
readProperty.9	connectTimeout=15000		configdb.properties:21
readProperty.10	socketTimeout=15000		configdb.properties:22
writeDriverClass	com.mysql.jdbc.Driver	the write connection must point to the database master	configdb.properties:25
writeUrl	jdbc:mysql://localhost/configdb	writeURL holds the database host and the used schema name	configdb.properties:27
writeProperty.1	user=openexchange	username for the database user	configdb.properties:29
writeProperty.2	password=secret	password for the database user	configdb.properties:31
writeProperty.3	useUnicode=true	The driver properties should be kept at their defaults	configdb.properties:33
writeProperty.4	characterEncoding=UTF-8		configdb.properties:34
writeProperty.5	autoReconnect=true		configdb.properties:35
writeProperty.6	useServerPrepStmts=false		configdb.properties:36
writeProperty.7	useTimezone=true		configdb.properties:37
writeProperty.8	serverTimezone=UTC		configdb.properties:38
writeProperty.9	connectTimeout=15000		configdb.properties:39
writeProperty.10	socketTimeout=15000		configdb.properties:40
cleanerInterval	10000	Timeinterval of cleaner thread in milliseconds. This thread removes idle timed out database connections and removes not used database connection pools. after each cleanerInterval.	configdb.properties:45
minIdle	0	Number of connections to keep open although they aren't used. This value is overwritten for OX databases from configdb. Sould be 0 so that no unnecessary connection are kept in the memory.	configdb.properties:50
maxIdle	-1	Number of maximum idle connections. More connections aren't pooled and closed. -1 stands for unlimited.	configdb.properties:54
maxIdleTime	60000	Maximum time in milliseconds a connection can be idle. If this time is exceeded, the connection gets closed.	configdb.properties:58
maxActive	100	If exhaustedAction is set to BLOCK, not more than maxActive connections will be opened to the mysql database. This value is overwritten for OX databases from configdb.	configdb.properties:63
maxWait	10000	If exhaustedAction is set to BLOCK, a thread will not wait for more than maxWait milliseconds.	configdb.properties:67
readDriverClass	com.mysql.jdbc.Driver	the read connection must point to the database slave	configdb.properties:7
maxLifeTime	600000	Maximum time in milliseconds a connection will be used. After this time the connection get closed.	configdb.properties:71
exhaustedAction	BLOCK	BLOCK: If maxActive number of connections is reached threads have to wait for a connection. FAIL: If maxActive number of connections is reached an exception is thrown. GROW: Open more connections even if maxActive is already reached. This value is overwritten for OX databases from configdb.	configdb.properties:77
testOnActivate	false	Validate connections if they are activated. This is not necessary because the activation already includes a check if the connection isn't closed.	configdb.properties:81
testOnDeactivate	true	Check if connections can be reused after they are returned to the pool.	configdb.properties:84
testOnIdle	false	Not useful for connections.	configdb.properties:87
readUrl	jdbc:mysql://localhost/configdb	readURL holds the database host and the used schema name	configdb.properties:9
testThreads	false	if testThreads is set to true, more information is logged to the Open-Xchange log files about database connections. If this option is enabled the performance may degrade dramatically. The JVM has to generate then a lot of method call stack dumps.	configdb.properties:93
URL	http://localhost/oxadmin/umin		configjump.properties:4
URL	http://localhost/?cid=%c&login=%u&pass=%p	URL to the config interface. %c is replaced with context login information. %u is replaced with user login information. %p is replaced with user password.	configjump.properties:5
validate_contact_email	true	Check the entered email address from a new contact for correctness (syntactic check user@domain.tld)	contact.properties:12
max_image_size	4194304	The maximum size in bytes for the upload of contact images. Remember: If you decrease the size after some images where uploaded already, you might trigger errors, for example when trying to modify the contact without adding an image of the correct size.	contact.properties:16
com.openexchange.contact.mailAddressAutoSearch	true	Determines if a search is triggered if the dialog for searching for emailable contacts is opened. This dialog is used for selecting recipients for an email and for creating distribution lists.	contact.properties:21
com.openexchange.contact.singleFolderSearch	false	Searching for contacts can be done in a single folder or globally across all folders. Searching across all folders can cause high server and database load because first all visible folders must be determined and if a user has object read permissions in that folders. Software internal default is true to prevent high load if the property is not defined. Default here is false because it is easier for the user to find contacts.	contact.properties:27
com.openexchange.contacts.characterSearch	true	Enables/Disables the start letter based quick select of contacts	contact.properties:30
com.openexchange.contacts.allFoldersForAutoComplete	true	The auto complete search for email addresses may be triggered easily and quite often if a new email is written and a part of a recipients address is written. This can lead to high load on the database system if a context has a lot of users and a lot of contacts. Therefore the scope if this search can be configured. Set this parameter to true and the auto complete search looks in every readable contact folder for contacts with emails addresses matching the already typed letters. If this parameter is configured to false, only three folders are considered for the search: the users private default contact folder, his contact folder for collected contacts and the global address book if that is enabled for the user.	contact.properties:38
com.openexchange.contact.scaleVCardImages	200x200	Configures the maximum image dimension to use when serializing contacts to vCards in the format [max_width]x[max_height]. Larger images will be resized dynamically to fit the specified rectangular area. If left empty, images are not resized at all and serialized as-is.	contact.properties:44
contact_first_letter_field	field02	First Letter Field, the field you sort in when you hit one of the start letters field02 Last name field03 First name	contact.properties:8
com.openexchange.contactcollector.enabled	true	Whether enabled or disabled regardless of bundle start-up Enabled by default (provided that bundle is installed and properly started)	contactcollector.properties:5
com.openexchange.contactcollector.folder.deleteDenied	false	Whether deletion of contact collector folder will be denied	contactcollector.properties:8
CONTEXT_RESTORE_STORAGE	com.openexchange.admin.contextrestore.storage.mysqlStorage.OXContextRestoreMySQLStorage	Define the storage implementation here	contextrestore.properties:2
modules/themes/default	Cool Water (Default)	The following property defines the default theme of the AJAX GUI.	cool-water-theme.properties:4
com.openexchange.subscribe.crawler.updatedfile	http://software.open-xchange.com/OX6/6.18/crawler-updates/updates.html	Points to the remove URL for updates to workflow definitions	crawler.properties:10
com.openexchange.subscribe.crawler.updateinterval	86400000	The time interval in which to check for updates. Defaults to 86400000, which means daily.	crawler.properties:13
com.openexchange.subscribe.crawler.enableautoupdate	true	Enables/disables auto-update for crawler functionality (true / false)	crawler.properties:16
com.openexchange.subscribe.crawler.onlyupdatealreadyinstalled	false	Only update crawlers that are already installed (true) or add new crawlers as they become available (false)	crawler.properties:19
com.openexchange.subscribe.crawler.googlemail	true	Enable / Disable individual crawlers (true / false)	crawler.properties:22
com.openexchange.subscribe.xing	true		crawler.properties:23
com.openexchange.subscribe.crawler.web.de	true		crawler.properties:24
com.openexchange.subscribe.crawler.google.calendar	true		crawler.properties:25
com.openexchange.subscribe.crawler.t-online.de	true		crawler.properties:26
com.openexchange.subscribe.crawler.gmx.de	true		crawler.properties:27
com.openexchange.subscribe.crawler.msn.de	false		crawler.properties:28
com.openexchange.subscribe.crawler.suncontacts	false		crawler.properties:29
com.openexchange.subscribe.crawler.suncalendar	false		crawler.properties:30
com.openexchange.subscribe.crawler.suntasks	false		crawler.properties:31
com.openexchange.subscribe.crawler.yahoocom	true		crawler.properties:32
com.openexchange.subscribe.crawler.googlemail.autorunInterval	1d	As an enhancement to the subscription module, we allow to configure that subscriptions should run automatically on login if a certain time interval between the last refresh run has elapsed (defaults to 1 day).	crawler.properties:36
com.openexchange.subscribe.xing.autorunInterval	1d		crawler.properties:37
com.openexchange.subscribe.crawler.webde.autorunInterval	1d		crawler.properties:38
com.openexchange.subscribe.crawler.google.calendar.autorunInterval	1d		crawler.properties:39
com.openexchange.subscribe.crawler.path	crawlers	Points to the directory containing the workflow definitions of crawlers	crawler.properties:4
com.openexchange.subscribe.crawler.gmx.autorunInterval	1d		crawler.properties:40
com.openexchange.subscribe.crawler.t-online.de.autorunInterval	1d		crawler.properties:41
com.openexchange.subscribe.crawler.gmx.de.autorunInterval	1d		crawler.properties:42
com.openexchange.subscribe.crawler.msn.de.autorunInterval	1d		crawler.properties:43
com.openexchange.subscribe.crawler.suncontacts.autorunInterval	1d		crawler.properties:44
com.openexchange.subscribe.crawler.suncalendar.autorunInterval	1d		crawler.properties:45
com.openexchange.subscribe.crawler.suntasks.autorunInterval	1d		crawler.properties:46
com.openexchange.subscribe.crawler.updatepath	http://software.open-xchange.com/OX6/6.18/crawler-updates/files/	Points to the remote URL containing updates to the workflow definitions	crawler.properties:7
com.openexchange.groupware.dataRetrieval.lifetime	60000	Lifetime of a token in milliseconds. If this value is not set or negative the token only expires at the end of the session.	dataRetrieval.properties:6
com.openexchange.groupware.dataRetrieval.onetime	true	Whether the token expires after the first access or not. Defaults to true.	dataRetrieval.properties:9
com.openexchange.dataretention.sourceID	OX_mail_01	The string identifying the data source; e.g. "OX_mail_01"	dataretention.properties:11
com.openexchange.dataretention.location	DE/Olpe	The location of the system generating the retention data	dataretention.properties:14
com.openexchange.dataretention.timeZone	GMT	The time zone of the location	dataretention.properties:17
com.openexchange.dataretention.dir	/var/log/open-xchange	The directory where the CSV file is held	dataretention.properties:2
com.openexchange.dataretention.rotateLength	0	Specifies the max. output resource's length (in bytes) before it gets rotated. This option is only useful for implementations which output data to a file or to any limited resource. This value should have a reasonable size since multiple write accesses may occur at same time. Therefore small sizes (<= 200KB) cannot be guaranteed being obeyed. Moreover it is only an approximate limit which can vary about 8KB. A value less than or equal to zero means no rotation.	dataretention.properties:26
com.openexchange.dataretention.versionNumber	1	The format version appended to each record type; e.g "H1" meaning "Header version 1".	dataretention.properties:5
com.openexchange.dataretention.clientID	Open-Xchange	The string identifying the tenant; e.g "Open-Xchange".	dataretention.properties:8
com.openexchange.spamhandler.defaultspamhandler.createConfirmedHam	true	# Indicates whether to create the confirmed-ham folder during check for default mail folders # during login if spam is enabled for logged-in user. # Default is true.	defaultspamhandler.properties:11
com.openexchange.spamhandler.defaultspamhandler.unsubscribeSpamFolders	true	# Indicates whether the confirmed-spam/confirmed-ham folders shall automatically be unsubscribed during login. # Default is true.	defaultspamhandler.properties:15
com.openexchange.spamhandler.defaultspamhandler.createConfirmedSpam	true	# Indicates whether to create the confirmed-spam folder during check for default mail folders # during login if spam is enabled for logged-in user. # Default is true.	defaultspamhandler.properties:6
com.openexchange.drive.events.apn.macos.enabled	false	Enables or disables push event notifications to clients using the Apple Push Notification service (APNS) for Mac OS devices. This requires a valid configuration for the APNS certificate and keys, see options below. Defaults to "false".	drive.properties:105
com.openexchange.drive.events.apn.macos.keystore		Specifies the path to the local keystore file (PKCS #12) containing the APNS certificate and keys for the Mac OS application, e.g. "/opt/open-xchange/etc/drive-apns.p12". Required if "com.openexchange.drive.events.apn.enabled" is "true".	drive.properties:111
com.openexchange.drive.events.apn.macos.password		Specifies the password used when creating the referenced keystore containing the certificate of the Mac OS application. Note that blank or null passwords are in violation of the PKCS #12 specifications. Required if "com.openexchange.drive.events.apn.enabled" is "true".	drive.properties:117
com.openexchange.drive.events.apn.macos.production	true	Indicates which APNS service is used when sending push notifications to Mac OS devices. A value of "true" will use the production service, a value of "false" the sandbox service. Defaults to "true".	drive.properties:122
com.openexchange.drive.useTempFolder	true	Specifies whether the synchronization logic will make use of a folder named ".drive" below the root synchronization folder or not. If enabled, this folder is used to store temporary uploads and removed files, which usually leads to a better user experience since previously synchronized files can be restored from there for example. If not, removed files are not kept, and uploads are performed directly in the target folder. Defaults to "true".	drive.properties:13
com.openexchange.drive.events.apn.macos.feedbackQueryInterval	1D	Configures the interval between queries to the APN feedback service for the subscribed Mac OS devices. The value can be defined using units of measurement: "D" (=days), "W" (=weeks) and "H" (=hours). Defaults to "1D" (one day). Leaving this parameter empty disables the feedback queries on this node. Since each received feedback is processed cluster-wide, only one node in the cluster should be enabled here.	drive.properties:130
com.openexchange.drive.events.gcm.enabled	false	Enables or disables push event notifications to clients using the Google Cloud Messaging (GCM) service. This requires a valid configuration for the GCM API key, see options below. Defaults to "false".	drive.properties:135
com.openexchange.drive.events.gcm.key		Specifies the API key of the server application. Required.	drive.properties:138
com.openexchange.drive.events.blockingLongPolling.enabled	false	Configures whether blocking long polling for pushing synchronization events to clients may be used as fallback when no other long polling handlers are available due to missing support of the HTTP service. Handling long polling in a blocking manner consumes a server thread, and should therefore only be enabled for testing purposes. Defaults to "false".	drive.properties:145
com.openexchange.drive.cleaner.interval	1D	Configures the interval between runs of the cleaner process for the temporary ".drive" folder. A cleaner run is only initiated if the synchronization is idle, i.e. the last synchronization resulted in no actions to be performed, and the last run was before the configured interval. The value can be defined using units of measurement: "D" (=days), "W" (=weeks) and "H" (=hours). Defaults to "1D" (one day).	drive.properties:21
com.openexchange.drive.cleaner.maxAge	1D	Defines the maximum age of files and directories to be kept inside the temporary ".drive" folder. Files or directories that were last modified before the configured age are deleted during the next run of the cleaner process. The value can be defined using units of measurement: "D" (=days), "W" (=weeks) and "H" (=hours). Defaults to "1D" (one day).	drive.properties:28
com.openexchange.drive.maxBandwidth	-1	Allows to limit the maximum used bandwidth for all downloads. If configured, downloads via the drive module handled by this backend node will not exceed the configured bandwidth. The available bandwidth is defined as the number of allowed bytes per second, where the byte value can be specified with one of the units "B" (bytes), "kB" (kilobyte), "MB" (Megabyte) or "GB" (Gigabyte), e.g. "10 MB". Must fit into the "Integer" range, i.e. the configured number of bytes has to be be smaller than 2^31. Defaults to "-1" (no limitations).	drive.properties:38
com.openexchange.capability.drive	true	Enables or disables the "drive" module capability globally.	drive.properties:4
com.openexchange.drive.maxBandwidthPerClient	-1	Allows to limit the maximum used bandwidth for client downloads within the same session. If configured, downloads originating in the same session via the drive module handled by this backend node will not exceed the configured bandwidth. The available bandwidth is defined as the number of allowed bytes per second, where the byte value can be specified with one of the units "B" (bytes), "kB" (kilobyte), "MB" (Megabyte) or "GB" (Gigabyte), e.g. "500 kB". Must fit into the "Integer" range, i.e. the configured number of bytes has to be be smaller than 2^31. Defaults to "-1" (no limitations).	drive.properties:49
com.openexchange.drive.maxConcurrentSyncOperations	-1	Specifies the maximum allowed number of synchronization operations, i.e. all requests to the "drive" module apart from up- and downloads, that the server accepts concurrently. While the limit is reached, further synchronization requests are rejected in a HTTP 503 manner (service unavailable), and the client is instructed to try again at a later time. Defaults to "-1" (no limitations).	drive.properties:57
com.openexchange.drive.directLinkQuota	https://[hostname]	Configures the pattern for a direct link to manage a user's quota. Text in brackets is replaced dynamically during link generation in the backend, however, it's still possible to overwrite them here with a static value, or even define an arbitrary URL here. [hostname] should be replaced with the server's canonical host name (if not, the server tries to determine the hostname on it's own), [uiwebpath] is replaced with the value of "com.openexchange.UIWebPath" as defined in "server.properties". [contextid], [userid] and [login] are replaced to reflect the values of the current user. Defaults to "https://[hostname]".	drive.properties:68
com.openexchange.drive.events.apn.ios.enabled	false	Enables or disables push event notifications to clients using the Apple Push Notification service (APNS) for iOS devices. This requires a valid configuration for the APNS certificate and keys, see options below. Defaults to "false".	drive.properties:74
com.openexchange.drive.events.apn.ios.keystore		Specifies the path to the local keystore file (PKCS #12) containing the APNS certificate and keys for the iOS application, e.g. "/opt/open-xchange/etc/drive-apns.p12". Required if "com.openexchange.drive.events.apn.enabled" is "true".	drive.properties:80
com.openexchange.drive.events.apn.ios.password		Specifies the password used when creating the referenced keystore containing the certificate of the iOS application. Note that blank or null passwords are in violation of the PKCS #12 specifications. Required if "com.openexchange.drive.events.apn.enabled" is "true".	drive.properties:86
com.openexchange.drive.events.apn.ios.production	true	Indicates which APNS service is used when sending push notifications to iOS devices. A value of "true" will use the production service, a value of "false" the sandbox service. Defaults to "true".	drive.properties:91
com.openexchange.drive.events.apn.ios.feedbackQueryInterval	1D	Configures the interval between queries to the APN feedback service for the subscribed iOS devices. The value can be defined using units of measurement: "D" (=days), "W" (=weeks) and "H" (=hours). Defaults to "1D" (one day). Leaving this parameter empty disables the feedback queries on this node. Since each received feedback is processed cluster-wide, only one node in the cluster should be enabled here.	drive.properties:99
com.openexchange.oauth.dropbox.apiSecret	PUT_YOUR_APP_SECRET_HERE	The API secret	dropbox.properties:10
com.openexchange.oauth.dropbox	true	Enable/disable	dropbox.properties:4
com.openexchange.oauth.dropbox.apiKey	PUT_YOUR_APP_KEY_HERE	The API key	dropbox.properties:7
com.openexchange.oauth.dropbox	false	Enable/disable	dropboxoauth.properties:3
com.openexchange.oauth.dropbox.apiKey		The API key	dropboxoauth.properties:6
com.openexchange.oauth.dropbox.apiSecret		The API secret	dropboxoauth.properties:9
com.openexchange.mobile.configuration.urlencoding	UTF-8	Define the URL encoding which will be used to modify the given URL	eas-provisioning-mail.properties:11
com.openexchange.mobile.configuration.mail.from	user	Define the FROM address of the email which will be sent to the user when he has selected the email transport as provisioning method. Possible values are: 1. A valid eMail address (eg.: admin@example.com) 2. user (Then the from address will be the standard address from the user who sends the provisioning message)	eas-provisioning-mail.properties:19
com.openexchange.mobile.configuration.mail.message.en_US.subject	Open-Xchange Mobility Provisioning	Define the subject and the mailtext of the provisioning eMail which will be send to the user if he has chosen eMail as provisioning method. You can set a subject and text per language. If you want to add a new language code provide the following two configuration options: com.openexchange.mobile.configuration.mail.message.$languagecode_$LANDCODE.subject com.openexchange.mobile.configuration.mail.message.$languagecode_$LANDCODE.text	eas-provisioning-mail.properties:28
com.openexchange.mobile.configuration.mail.message.en_US.text	Please click on the following link to open the Open-Xchange Mobility Provisioning application: %u		eas-provisioning-mail.properties:29
com.openexchange.mobile.configuration.mail.message.en_GB.subject	Open-Xchange Mobility Provisioning		eas-provisioning-mail.properties:30
com.openexchange.mobile.configuration.mail.message.en_GB.text	Please click on the following link to open the Open-Xchange Mobility Provisioning application: %u		eas-provisioning-mail.properties:31
com.openexchange.mobile.configuration.mail.message.de_DE.subject	Open-Xchange Mobility-Provisionierung		eas-provisioning-mail.properties:32
com.openexchange.mobile.configuration.mail.message.de_DE.text	Bitte auf den folgenden Link klicken, um die Open-Xchange Mobility Provisionierungs-Applikation zu \u00F6ffnen: %u		eas-provisioning-mail.properties:33
com.openexchange.mobile.configuration.mail.message.fr_FR.subject	Pr\u00E9paration de la mobilit\u00E9 Open-Xchange		eas-provisioning-mail.properties:34
com.openexchange.mobile.configuration.mail.message.fr_FR.text	Veuillez cliquer sur le lien suivant pour ouvrir l'application de pr\u00E9paration de la mobilit\u00E9 Open-Xchange: %u		eas-provisioning-mail.properties:35
com.openexchange.mobile.configuration.mail.message.nl_NL.subject	Open-Xchange-mobility-initialisatie		eas-provisioning-mail.properties:36
com.openexchange.mobile.configuration.mail.message.nl_NL.text	Klik op de volgende link om de initialisatietoepasssing voor Open-Xchange-mobility te starten: %u		eas-provisioning-mail.properties:37
com.openexchange.mobile.configuration.mail.message.es_ES.subject	Configuraci\u00F3n m\u00F3vil de Open-Xchange		eas-provisioning-mail.properties:38
com.openexchange.mobile.configuration.mail.message.es_ES.text	Por favor, haga clic en el siguiente enlace para ejecutar la aplicaci\u00F3n de configuraci\u00F3n m\u00F3vil de Open-Xchange: %u		eas-provisioning-mail.properties:39
com.openexchange.mobile.configuration.mail.message.it_IT.subject	Fornitura in mobilit\u00E0 Open-Xchange		eas-provisioning-mail.properties:40
com.openexchange.mobile.configuration.mail.message.it_IT.text	Fai clic sul seguente collegamento per aprire l'applicazione di fornitura in mobilit\u00E0 Open-Xchange: %u		eas-provisioning-mail.properties:41
com.openexchange.mobile.configuration.sms.message.en_US.text	Please click on the following link to open the Open-Xchange Mobility Provisioning application: %u	Define the text of the provisioning SMS which will be send to the user if he has chosen SMS as provisioning method. You can set a text per language. If you want to add a new language code provide the following configuration option: com.openexchange.mobile.configuration.sms.message.$languagecode_$LANDCODE.text	eas-provisioning-mail.properties:48
com.openexchange.mobile.configuration.sms.message.en_GB.text	Please click on the following link to open the Open-Xchange Mobility Provisioning application: %u		eas-provisioning-mail.properties:49
com.openexchange.mobile.configuration.sms.message.de_DE.text	Bitte auf den folgenden Link klicken, um die Open-Xchange Mobility Provisionierungs-Applikation zu \u00F6ffnen: %u		eas-provisioning-mail.properties:50
com.openexchange.mobile.configuration.sms.message.fr_FR.text	Veuillez cliquer sur le lien suivant pour ouvrir l'application de pr\u00E9paration de la mobilit\u00E9 Open-Xchange: %u		eas-provisioning-mail.properties:51
com.openexchange.mobile.configuration.sms.message.nl_NL.text	Klik op de volgende link om de initialisatietoepasssing voor Open-Xchange-mobility te starten: %u		eas-provisioning-mail.properties:52
com.openexchange.mobile.configuration.sms.message.es_ES.text	Por favor, haga clic en el siguiente enlace para ejecutar la aplicaci\u00F3n de configuraci\u00F3n m\u00F3vil de Open-Xchange: %u		eas-provisioning-mail.properties:53
com.openexchange.mobile.configuration.sms.message.it_IT.text	Fai clic sul seguente collegamento per aprire l'applicazione di fornitura in mobilit\u00E0 Open-Xchange: %u		eas-provisioning-mail.properties:54
com.openexchange.mobile.configuration.url	https://%h/servlet/mobileconfig?l=%p	Define the URL which will be send to the device via the transport. The following placeholders will be replaced by: %h : The Hostname taken from the URL of the user %l : The login which the user has entered on the login page %c : The context ID %u : The user login %p : Users primary email address	eas-provisioning-mail.properties:8
com.openexchange.mobile.configuration.json.action.sms.sipgat.api.url	https://samurai.sipgate.net/RPC2	Properties for the ACTION SMS Provisioning Plugin Currently only SIPGATE is supported as SMS provider via XML-RPC API Sipgate API URL	eas-provisioning-sms.properties:10
com.openexchange.mobile.configuration.json.action.sms.sipgat.api.username	openexchange	Sipgate API Username	eas-provisioning-sms.properties:14
com.openexchange.mobile.configuration.json.action.sms.sipgat.api.password	test	Sipgate API Password	eas-provisioning-sms.properties:18
modules/com.openexchange.eas.provisioning.ui/module	true		eas-provisioning-ui.properties:1
modules/com.openexchange.eas.provisioning.ui/other/0/fr_FR/name	Nokia S60		eas-provisioning-ui.properties:10
modules/com.openexchange.eas.provisioning.ui/other/0/fr_FR/url	plugins/com.openexchange.usm.eas/html/ox6-nokias60-French.html		eas-provisioning-ui.properties:11
modules/com.openexchange.eas.provisioning.ui/other/0/en_US/name	Nokia S60		eas-provisioning-ui.properties:12
modules/com.openexchange.eas.provisioning.ui/other/0/en_US/url	plugins/com.openexchange.usm.eas/html/ox6-nokias60-English.html		eas-provisioning-ui.properties:13
modules/com.openexchange.eas.provisioning.ui/other/0/en_GB/name	Nokia S60		eas-provisioning-ui.properties:14
modules/com.openexchange.eas.provisioning.ui/other/0/en_GB/url	plugins/com.openexchange.usm.eas/html/ox6-nokias60-English.html		eas-provisioning-ui.properties:15
modules/com.openexchange.eas.provisioning.ui/other/0/nl_NL/name	Nokia S60		eas-provisioning-ui.properties:16
modules/com.openexchange.eas.provisioning.ui/other/0/nl_NL/url	plugins/com.openexchange.usm.eas/html/ox6-nokias60-Dutch.html		eas-provisioning-ui.properties:17
modules/com.openexchange.eas.provisioning.ui/other/0/es_ES/name	Nokia S60		eas-provisioning-ui.properties:18
modules/com.openexchange.eas.provisioning.ui/other/0/es_ES/url	plugins/com.openexchange.usm.eas/html/ox6-nokias60-Spanish.html		eas-provisioning-ui.properties:19
modules/com.openexchange.eas.provisioning.ui/other/1/de_DE/name	Blackberry	Blackberry configuration description:	eas-provisioning-ui.properties:23
modules/com.openexchange.eas.provisioning.ui/other/1/de_DE/url	plugins/com.openexchange.usm.eas/html/ox6-blackberry-German.html		eas-provisioning-ui.properties:24
modules/com.openexchange.eas.provisioning.ui/other/1/fr_FR/name	Blackberry		eas-provisioning-ui.properties:25
modules/com.openexchange.eas.provisioning.ui/other/1/fr_FR/url	plugins/com.openexchange.usm.eas/html/ox6-blackberry-French.html		eas-provisioning-ui.properties:26
modules/com.openexchange.eas.provisioning.ui/other/1/en_US/name	Blackberry		eas-provisioning-ui.properties:27
modules/com.openexchange.eas.provisioning.ui/other/1/en_US/url	plugins/com.openexchange.usm.eas/html/ox6-blackberry-English.html		eas-provisioning-ui.properties:28
modules/com.openexchange.eas.provisioning.ui/other/1/en_GB/name	Blackberry		eas-provisioning-ui.properties:29
modules/com.openexchange.eas.provisioning.ui/other/1/en_GB/url	plugins/com.openexchange.usm.eas/html/ox6-blackberry-English.html		eas-provisioning-ui.properties:30
modules/com.openexchange.eas.provisioning.ui/other/1/nl_NL/name	Blackberry		eas-provisioning-ui.properties:31
modules/com.openexchange.eas.provisioning.ui/other/1/nl_NL/url	plugins/com.openexchange.usm.eas/html/ox6-blackberry-Dutch.html		eas-provisioning-ui.properties:32
modules/com.openexchange.eas.provisioning.ui/other/1/es_ES/name	Blackberry		eas-provisioning-ui.properties:33
modules/com.openexchange.eas.provisioning.ui/other/1/es_ES/url	plugins/com.openexchange.usm.eas/html/ox6-blackberry-Spanish.html		eas-provisioning-ui.properties:34
modules/com.openexchange.eas.provisioning.ui/other/2/de_DE/name	Android	Android configuration description:	eas-provisioning-ui.properties:38
modules/com.openexchange.eas.provisioning.ui/other/2/de_DE/url	plugins/com.openexchange.usm.eas/html/ox6-android2-German.html		eas-provisioning-ui.properties:39
modules/com.openexchange.eas.provisioning.ui/other/2/fr_FR/name	Android		eas-provisioning-ui.properties:40
modules/com.openexchange.eas.provisioning.ui/other/2/fr_FR/url	plugins/com.openexchange.usm.eas/html/ox6-android2-French.html		eas-provisioning-ui.properties:41
modules/com.openexchange.eas.provisioning.ui/other/2/en_US/name	Android		eas-provisioning-ui.properties:42
modules/com.openexchange.eas.provisioning.ui/other/2/en_US/url	plugins/com.openexchange.usm.eas/html/ox6-android2-English.html		eas-provisioning-ui.properties:43
modules/com.openexchange.eas.provisioning.ui/other/2/en_GB/name	Android		eas-provisioning-ui.properties:44
modules/com.openexchange.eas.provisioning.ui/other/2/en_GB/url	plugins/com.openexchange.usm.eas/html/ox6-android2-English.html		eas-provisioning-ui.properties:45
modules/com.openexchange.eas.provisioning.ui/other/2/nl_NL/name	Android		eas-provisioning-ui.properties:46
modules/com.openexchange.eas.provisioning.ui/other/2/nl_NL/url	plugins/com.openexchange.usm.eas/html/ox6-android2-Dutch.html		eas-provisioning-ui.properties:47
modules/com.openexchange.eas.provisioning.ui/other/2/es_ES/name	Android		eas-provisioning-ui.properties:48
modules/com.openexchange.eas.provisioning.ui/other/2/es_ES/url	plugins/com.openexchange.usm.eas/html/ox6-android2-Spanish.html		eas-provisioning-ui.properties:49
modules/com.openexchange.eas.provisioning.ui/other/0/de_DE/name	Nokia S60	The following options will display the detailed setup descriptions from devices which don't support autoconfiguration emails. Nokia S60 configuration description:	eas-provisioning-ui.properties:8
modules/com.openexchange.eas.provisioning.ui/other/0/de_DE/url	plugins/com.openexchange.usm.eas/html/ox6-nokias60-German.html		eas-provisioning-ui.properties:9
com.openexchange.mobile.configuration.generator.OpensslBinary		The location of the openssl binary (needed if SignConfig is true)	eas-provisioning.properties:10
com.openexchange.mobile.configuration.generator.OpensslTimeout	3000	The timeout for the openssl binary in milliseconds (needed if SignConfig is true)	eas-provisioning.properties:12
com.openexchange.mobile.configuration.generator.CertFile		The cert file (needed if SignConfig is true)	eas-provisioning.properties:14
com.openexchange.mobile.configuration.generator.KeyFile		The key file (needed if SignConfig is true)	eas-provisioning.properties:16
com.openexchange.mobile.configuration.generator.iPhoneRegex	^.*(iPhone|iPad).*$	RegEx for iPhone browser detection	eas-provisioning.properties:2
com.openexchange.mobile.configuration.generator.WinMobRegex	^.*Windows Phone.*$	RegEx for Windows Mobile browser detection	eas-provisioning.properties:4
com.openexchange.mobile.configuration.generator.OnlySecureConnect	true	If only https should be used	eas-provisioning.properties:6
com.openexchange.mobile.configuration.generator.SignConfig	false	If signing is used or not	eas-provisioning.properties:8
read_cl	ONE	Consistency Levels. It can be defined on a per-column-family basis. Since we only have one column family, it only applies to that. Possible values (CaSe sensitive): ONE, TWO, THREE, QUORUM, ALL, ANY, EACH_QUORUM, LOCAL_QUORUM	eavstorage.properties:15
write_cl	ONE		eavstorage.properties:16
replication_factor	1	Replication factor of the keyspace	eavstorage.properties:2
keyspace	OX	Keyspace name	eavstorage.properties:5
cf_xt_props	ExtendedProperties	Extended Properties column family name	eavstorage.properties:8
com.openexchange.event.eventQueueDelay	60000	This parameter set the delay in milliseconds when events are sent to the subscribed services. Events for example are triggered when deleting an appointment with attachment. The event then is for deleting the attachment. If this value is increased more events may be in the queue that must be executed. This can cause longer runtime delivering all those events. Lowering this value may cause too often look into the queue without finding events there to process.	event.properties:17
com.openexchange.event.isEventQueueEnabled	true	This option enables or disable the complete event handling for OX The event handling is a essential Open-Xchange component which needs to always run. This should only be set to false for debugging purposes.	event.properties:8
com.openexchange.messaging.facebook.loginPageBaseURL	http://www.facebook.com/login.php	Specify the base URL of facebook's login page	facebookmessaging.properties:10
com.openexchange.messaging.facebook.actionOfLoginForm	https://login.facebook.com/login.php?login_attempt=1	Specify the action of the facebook login form located at login page	facebookmessaging.properties:13
com.openexchange.messaging.facebook.linkAfterLogin	"\\Qhttp://www.facebook.com/profile.php?ref=profile&id=\\E([0-9]+)"	Specify the regular expression (in quotes) for the link of the expected page after successfully passing facebook's login page Note: The (optional) capturing group is checked against facebook's user identifier. If no group is specified, no check is performed	facebookmessaging.properties:17
com.openexchange.messaging.facebook.apiVersion	1.0	Specify the version of facebook's API	facebookmessaging.properties:20
com.openexchange.messaging.facebook.nameOfUserField	email	Specify the name of the login field on facebook's login page	facebookmessaging.properties:23
com.openexchange.messaging.facebook.nameOfPasswordField	pass	Specify the name of the password field on facebook's login page	facebookmessaging.properties:26
com.openexchange.messaging.facebook	true		facebookmessaging.properties:3
com.openexchange.messaging.facebook.renewalFrequence	300000	Frequence for facebook session renewal in milliseconds. Default is 300000 (5 minutes).	facebookmessaging.properties:7
com.openexchange.oauth.facebook	false	Enable/disable Facebook OAuth support	facebookoauth.properties:2
com.openexchange.facebook.apiKey	INSERT_YOUR_API_KEY_HERE	Specify the API key obtained from facebook	facebookoauth.properties:5
com.openexchange.facebook.secretKey	INSERT_YOUR_API_SECRET_HERE	Specify the secret key obtained from facebook	facebookoauth.properties:8
com.openexchange.subscribe.socialplugin.facebook	true		facebooksubscribe.properties:1
com.openexchange.subscribe.socialplugin.facebook.autorunInterval	1d		facebooksubscribe.properties:2
com.openexchange.hazelcast.configuration.map.backupCount	1	Number of backups. If 1 is set as the backup-count for example, then all entries of the map will be copied to another JVM for fail-safety. 0 means no backup.	filemanagementDistributed.properties:11
com.openexchange.hazelcast.configuration.map.asyncBackupCount	0	Number of nodes with async backups. Async backups do not block operations and do not require acknowledgements. 0 means no backup. Any integer between 0 and 6. Default is 0, setting bigger than 6 has no effect.	filemanagementDistributed.properties:16
com.openexchange.hazelcast.configuration.map.readBackupData	true	Can we read the local backup entries? Default value is false for strong consistency. Being able to read backup data will give you greater performance.	filemanagementDistributed.properties:21
com.openexchange.hazelcast.configuration.map.name	distributedFiles-0	The name of the map. Don't change this on your own.	filemanagementDistributed.properties:24
com.openexchange.hazelcast.configuration.map.maxIdleSeconds	3600	Maximum number of seconds for each entry to stay idle in the map. Entries that are idle (not touched) for more than <max-idle-seconds> will get automatically evicted from the map. Entry is touched if get, put or containsKey is called. Any integer between 0 and Integer.MAX_VALUE. 0 means infinite.	filemanagementDistributed.properties:31
IGNORE_SHARED_ADDRESSBOOK	TRUE	Determine whether to ignore 'shared addressbook' folder or not. Possible values: TRUE / FALSE	foldercache.properties:12
ENABLE_INTERNAL_USER_EDIT	TRUE	Define if users are allowed to edit their own contact object contained in folder 'Global Address Book' aka 'Internal Users'. Switching this parameter only has an effect for new created contexts.	foldercache.properties:17
com.openexchange.folderstorage.outlook.showPersonalBelowInfoStore	true	Specifies whether a user's default InfoStore folder should appear below InfoStore root folder: - Infostore -- My files -- Public infostore -- Userstore -- Other infstore folders	foldercache.properties:27
com.openexchange.folderstorage.database.preferDisplayName	false	Specifies whether default InfoStore folders are labeled with owning user's display name or name is read from folder storage (database)	foldercache.properties:31
ENABLE_DB_GROUPING	TRUE	Define where to perform folder grouping. This filters the database results for duplicate folders in the where clause of the db statement or afterwards in the application. Possible values: TRUE / FALSE	foldercache.properties:5
ENABLE_FOLDER_CACHE	TRUE	Enable or disable folder caching. Possible values: TRUE / FALSE	foldercache.properties:8
com.openexchange.folder.json.module	folders	# Define the module which also serves as the appendix for registered servlet: # If module is set to "myfolders", the servlet path is changed to "/ajax/myfolders" # Default is "folders"	folderjson.properties:6
project.required.plugins	org.apache.forrest.plugin.output.pdf	The names of plugins that are required to build the project comma separated list (no spaces) You can request a specific version by appending "-VERSION" to the end of the plugin name. If you exclude a version number the latest released version will be used, however, be aware that this may be a development version. In a production environment it is recomended that you specify a known working version. Run "forrest available-plugins" for a list of plug-ins currently available	forrest.properties:125
project.skin	lucene	Specifies name of Forrest skin to use See list at http://forrest.apache.org/docs/skins.html	forrest.properties:29
com.openexchange.freebusy.provider.ews.password		The password to access the EWS. Required.	freebusy_provider_ews.properties:11
com.openexchange.freebusy.provider.ews.detailed	true	Configures whether the detailed free/busy-view including subject and location of the appointments is requested from EWS or not.	freebusy_provider_ews.properties:15
com.openexchange.freebusy.provider.ews.emailSuffixes		Allows the definition of a comma-separated list of e-mail-address suffixes (e.g. domain parts like "@example.org") that are used to pre-filter the requested participants before passing them to EWS. Optional, but strongly recommended to reduce the amount of transferred data.	freebusy_provider_ews.properties:21
com.openexchange.freebusy.provider.ews.validEmailsOnly	true	Configures whether only valid e-mail addresses are used in the free/busy lookup or not.	freebusy_provider_ews.properties:25
com.openexchange.freebusy.provider.ews.trustAllCerts	false	For testing purposes, it's possible to skip certificate validation and trust all server certificates. This might only work when using Sun Java as it configures "com.sun.xml.internal.ws.transport.https.client.SSLSocketFactory".	freebusy_provider_ews.properties:30
com.openexchange.freebusy.provider.ews.skipHostVerification	false	For testing purposes, it's possible to bypass hostname verification. This might only work when using Sun Java as it configures "com.sun.xml.internal.ws.transport.https.client.hostname.verifier".	freebusy_provider_ews.properties:35
com.openexchange.freebusy.provider.ews.exchangeVersion	EXCHANGE_2010	Configures the requested Exchange Server version. Possible values include "EXCHANGE_2007_SP_1", "EXCHANGE_2010", "EXCHANGE_2010_SP_1" and "EXCHANGE_2010_SP_2".	freebusy_provider_ews.properties:40
com.openexchange.freebusy.provider.ews.url		Specifies the URL to the Exchange Web Service (usually something like http://exchange.example.com/EWS/Exchange.asmx). Required.	freebusy_provider_ews.properties:5
com.openexchange.freebusy.provider.ews.userName		The user name to access the EWS. Required.	freebusy_provider_ews.properties:8
com.openexchange.freebusy.provider.google.emailSuffixes	@gmail.com,@googlemail.com	Allows the definition of a comma-separated list of e-mail-address suffixes (e.g. domain parts like "@googlemail.com") that are used to pre-filter the requested participants before passing them to Google. Optional, but strongly recommended to reduce the amount of transferred data.	freebusy_provider_google.properties:15
com.openexchange.freebusy.provider.google.validEmailsOnly	true	Configures whether only valid e-mail addresses are used in the free/busy lookup or not.	freebusy_provider_google.properties:19
com.openexchange.freebusy.provider.google.apiEndpoint	https://www.googleapis.com/calendar/v3	Configures the URI of the Google Calendar API endpoint and should normally not be changed. Required.	freebusy_provider_google.properties:5
com.openexchange.freebusy.provider.google.apiKey	{YOUR_API_KEY}	Sets the Google API key to be used for requests to the Google Calendar API. Required.	freebusy_provider_google.properties:9
com.openexchange.freebusy.publisher.ews.userID		Specifies the user ID of the user in whose name the internal free/busy data is requested from the server (should normally be the internal user ID of the context administrator). Required.	freebusy_publisher_ews.properties:10
com.openexchange.freebusy.publisher.ews.url		Specifies the URL to the Exchange Web Service (usually something like http://exchange.example.com/EWS/Exchange.asmx). Required.	freebusy_publisher_ews.properties:14
com.openexchange.freebusy.publisher.ews.userName		The user name to access the EWS. Required.	freebusy_publisher_ews.properties:17
com.openexchange.freebusy.publisher.ews.password		The password to access the EWS. Required.	freebusy_publisher_ews.properties:20
com.openexchange.freebusy.publisher.ews.publishMonths	3	Configures the amount of free/busy data to be published. The period always starts at the first of the current month. Defaults to '3'.	freebusy_publisher_ews.properties:24
com.openexchange.freebusy.publisher.ews.delay	15	Specifies the time in minutes between publication cycles, i.e. configures the free/busy data update interval. Defaults to '15'.	freebusy_publisher_ews.properties:28
com.openexchange.freebusy.publisher.ews.initialDelay	5	Specifies the time in minutes before starting the first publication cycle upon bundle startup. Defaults to '5'.	freebusy_publisher_ews.properties:32
com.openexchange.freebusy.publisher.ews.chunkSize	50	Defines the number of users that are processed in a chunk when publishing free/busy data. Default to '50'.	freebusy_publisher_ews.properties:36
com.openexchange.freebusy.publisher.ews.exchangeVersion	EXCHANGE_2010	Configures the requested Exchange Server version. Possible values include "EXCHANGE_2007_SP_1", "EXCHANGE_2010", "EXCHANGE_2010_SP_1" and "EXCHANGE_2010_SP_2". Defaults to 'EXCHANGE_2010'.	freebusy_publisher_ews.properties:41
com.openexchange.freebusy.publisher.ews.trustAllCerts	false	For testing purposes, it's possible to skip certificate validation and trust all server certificates. This might only work when using Sun Java as it configures "com.sun.xml.internal.ws.transport.https.client.SSLSocketFactory".	freebusy_publisher_ews.properties:46
com.openexchange.freebusy.publisher.ews.contextID		Specifies the context ID of the users whose free/busy data is published to the Exchange server. Required.	freebusy_publisher_ews.properties:5
com.openexchange.freebusy.publisher.ews.skipHostVerification	false	For testing purposes, it's possible to bypass hostname verification. This might only work when using Sun Java as it configures "com.sun.xml.internal.ws.transport.https.client.hostname.verifier".	freebusy_publisher_ews.properties:51
com.openexchange.freebusy.publisher.ews.lookup		Specifies how the legacyExchangeDN for free/busy users is retrieved. May be one of 'static' or 'ldap'. A static lookup uses existing user attributes to construct the legacyExchangeDN path, while 'ldap' queries the 'legacyExchangeDN' attribute from the Active Directory using one or more user attributes. Required.	freebusy_publisher_ews.properties:58
com.openexchange.freebusy.publisher.ews.lookup.static		Configures the template to construct the legacyExchangeDN path. Required if 'com.openexchange.freebusy.publisher.ews.lookup' is set to 'static'. All occurrences of the following user attributes are replaced: [displayName], [contactId], [givenName], [surName], [userId], [imapLogin], [imapServer], [mailDomain], [mail], [loginInfo]. An example template would be "/o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/ cn=Recipients/cn=[displayName]"	freebusy_publisher_ews.properties:67
com.openexchange.freebusy.publisher.ews.lookup.ldap.filter		Configures the LDAP filter used to query the Active Directory for the legacyExchangeDN of a user. Required if 'com.openexchange.freebusy.publisher.ews.lookup' is set to 'ldap'. Within the search filter, all occurrences of the following user attributes are replaced dynamically: [displayName], [contactId], [givenName], [surName], [userId], [imapLogin], [imapServer], [mailDomain], [mail], [loginInfo]. For example: "(&(objectClass=contact)(cn=[displayName]))"	freebusy_publisher_ews.properties:76
com.openexchange.freebusy.publisher.ews.lookup.ldap.uri		The URI of the LDAP server, should be in the format ldap://myserver.example.com:389. For SSL access, use the ldaps protocol and the appropriate port, e.g. ldaps://myserver.example.com:636. Required if 'com.openexchange.freebusy.publisher.ews.lookup' is set to 'ldap'.	freebusy_publisher_ews.properties:82
com.openexchange.freebusy.publisher.ews.lookup.ldap.baseDN		Configures a base LDAP path. If defined, all Distinguished Names supplied to and received from LDAP operations will be relative to the LDAP path supplied. If not defined, the default naming context of the RootDSE is used as baseDN. Only used if 'com.openexchange.freebusy.publisher.ews.lookup' is set to 'ldap'.	freebusy_publisher_ews.properties:89
com.openexchange.freebusy.publisher.ews.lookup.ldap.bindDN		Specify the bind DN used for LDAP authentication here. Only used if 'com.openexchange.freebusy.publisher.ews.lookup' is set to 'ldap'. If left empty, anonymous authentication is used.	freebusy_publisher_ews.properties:94
com.openexchange.freebusy.publisher.ews.lookup.ldap.bindPW		Specify the bind password used for LDAP authentication here. Only used if 'com.openexchange.freebusy.publisher.ews.lookup' is set to 'ldap' and 'com.openexchange.freebusy.publisher.ews.lookup.ldap.bindDN' is defined.	freebusy_publisher_ews.properties:99
com.openexchange.http.grizzly.hasCometEnabled	true	Comet is an umbrella term used to describe a technique allowing web browser to receive almost real time updates from the server. The two most common approaches are long polling and streaming. Long polling differs from streaming in that each update from the server ultimately results in another follow up request from the client. Default value: true	grizzly.properties:18
com.openexchange.http.grizzly.hasWebSocketsEnabled	true	Bi-directional, full-duplex communications channels over a single TCP connection. Default value: false	grizzly.properties:23
com.openexchange.http.grizzly.hasJMXEnabled	true	Do you want to enable grizzly monitoring via JMX? Default value: true.	grizzly.properties:31
com.openexchange.http.grizzly.hasAJPEnabled	false	Grizzly is able to communicate via AJP besides its default prototcol HTTP. Do you want to use AJP instead of HTTP? Default value: false	grizzly.properties:40
com.openexchange.http.grizzly.ping	PROCESSING	Specify the ping mechanism to use. Currently supported values: * NONE -- No ping at all * PROCESSING -- Ping through 102 Processing interim response * CONTINUE -- Ping through 100 Continue interim response * WHITESPACE -- Ping through transmitting a whitespace character (and implicitly committing HTTP response) Default is PROCESSING.	grizzly.properties:52
com.openexchange.http.grizzly.pingDelay	90000	The ping delay aka frequency in milliseconds. Default is 90000.	grizzly.properties:56
com.openexchange.http.grizzly.maxPingCount	9	The number of pings allowed being initiated before quit A value of zero or less means unlimited (actually 2^31 - 1) Default is 9 (because Apache has a hard-coded limit of 10)	grizzly.properties:61
com.openexchange.halo.linkedin.enabledMailCapableKey	false	Specify whether LinkedIn API key/secret are allowed to access E-Mail-sensitive data	halo-linkedin.properties:4
com.openexchange.hazelcast.network.portAutoIncrement	true	Configures if automatically the next port should be tried if the incoming port is already in use. Defaults to "true".	hazelcast.properties:102
com.openexchange.hazelcast.network.outboundPortDefinitions		By default, Hazelcast lets the system to pick up an ephemeral port during socket bind operation. But security policies/firewalls may require to restrict outbound ports to be used by Hazelcast enabled applications. To fulfill this requirement, you can configure Hazelcast to use only defined outbound ports. You can use port ranges and/or comma separated ports, e.g. "35000-35100" or "36001, 36002, 36003". Defaults to "".	hazelcast.properties:110
com.openexchange.hazelcast.network.enableIPv6Support	false	Enables or disables support for IPv6. IPv6 support is switched off by default, since some platforms have issues in use of IPv6 stack, and some other platforms such as Amazon AWS have no support at all. Defaults to "false".	hazelcast.properties:116
com.openexchange.hazelcast.socket.bindAny	false	Configures whether to bind the server- and client-sockets to any local interface or not. Defaults to "false", which restricts the bind operation to the picked interface address based on the value of "com.openexchange.hazelcast.network.interfaces".	hazelcast.properties:122
com.openexchange.hazelcast.logging.enabled	true	Configures whether Hazelcast's internal logging system is enabled or not. Defaults to "true".	hazelcast.properties:129
com.openexchange.hazelcast.maxOperationTimeout	5000	Specifies the implicit maximum operation timeout in milliseconds for operations on distributed data structures, if no explicit timeout is specified for an operation. Defaults to "5000".	hazelcast.properties:134
com.openexchange.hazelcast.jmx	true	Enables or disables JMX monitoring for hazelcast components such as statistics about distributed data structures. Defaults to "true".	hazelcast.properties:138
com.openexchange.hazelcast.jmxDetailed	false	Specifies whether detailed JMX monitoring is enabled or not, i.e. detailed information about entries in distributed data structures. Only taken into account if "com.openexchange.hazelcast.jmx" is "true". Defaults to "false".	hazelcast.properties:143
com.openexchange.hazelcast.memcache.enabled	false	Enables or disables Hazelcast's internal Memcache client request listener service. Defaults to "false", as it's not needed by the backend.	hazelcast.properties:147
com.openexchange.hazelcast.rest.enabled	false	Enables or disables Hazelcast's internal REST client request listener service. Defaults to "false", as it's not needed by the backend.	hazelcast.properties:151
com.openexchange.hazelcast.enabled	true	Enables or disables Hazelcast. Setting this property to "false" will result in no Hazelcast instance being created for this node, and all other dependent features will be disabled. Defaults to "true".	hazelcast.properties:32
com.openexchange.hazelcast.group.name		Configures the name of the cluster. Only nodes using the same group name will join each other and form the cluster. Required if "com.openexchange.hazelcast.network.join" is not "empty" (see below).	hazelcast.properties:37
com.openexchange.hazelcast.group.password	wtV6$VQk8#+3ds!a	The password used when joining the cluster. Defaults to "wtV6$VQk8#+3ds!a". Please change this value, and ensure it's equal on all nodes in the cluster.	hazelcast.properties:41
com.openexchange.hazelcast.network.join	empty	Specifies which mechanism is used to discover other backend nodes in the cluster. Possible values are "empty" (no discovery for single-node setups), "static" (fixed set of cluster member nodes) or "multicast" (automatic discovery of other nodes via multicast). Defaults to "empty". Depending on the specified value, further configuration might be needed, see "Networking" section below.	hazelcast.properties:52
com.openexchange.hazelcast.network.join.static.nodes		Configures a comma-separated list of IP addresses / hostnames of possible nodes in the cluster, e.g. "10.20.30.12, 10.20.30.13:5701, 192.178.168.110". Only used if "com.openexchange.hazelcast.network.join" is set to "static". It doesn't hurt if the address of the local host appears in the list, so that it's still possible to use the same list throughout all nodes in the cluster.	hazelcast.properties:60
com.openexchange.hazelcast.network.join.multicast.group	224.2.2.3	Configures the multicast address used to discover other nodes in the cluster dynamically. Only used if "com.openexchange.hazelcast.network.join" is set to "multicast". If the nodes reside in different subnets, please ensure that multicast is enabled between the subnets. Defaults to "224.2.2.3".	hazelcast.properties:66
com.openexchange.hazelcast.network.join.multicast.port	54327	Configures the multicast port used to discover other nodes in the cluster dynamically. Only used if "com.openexchange.hazelcast.network.join" is set to "multicast". Defaults to "54327".	hazelcast.properties:71
com.openexchange.hazelcast.merge.firstRunDelay	120s	Configures the time until the first check if the cluster needs to merge is scheduled. This takes a timespan parameter with "ms" denoting milliseconds, "s" denoting seconds, "m" denoting minutes. The value is passed to the hazelcast property "hazelcast.merge.first.run.delay.seconds". Defaults to "120s".	hazelcast.properties:78
com.openexchange.hazelcast.merge.runDelay	120s	Configures the time between each check if the cluster needs to merge. This takes a timespan parameter with "ms" denoting milliseconds, "s" denoting seconds, "m" denoting minutes. The value is passed to the hazelcast property "hazelcast.merge.next.run.delay.seconds". Defaults to "120s".	hazelcast.properties:84
com.openexchange.hazelcast.network.interfaces	127.0.0.1	Comma-separated list of interface addresses hazelcast should use. Wildcards (*) and ranges (-) can be used. Leave blank to listen on all interfaces Especially in server environments with multiple network interfaces, it's recommended to specify the IP-address of the network interface to bind to explicitly. Defaults to "127.0.0.1" (local loopback only), needs to be adjusted when building a cluster of multiple backend nodes.	hazelcast.properties:95
com.openexchange.hazelcast.network.port	5701	The port Hazelcast will listen for incoming connections. Defaults to "5701".	hazelcast.properties:98
CONTEXT_STORAGE	com.openexchange.admin.storage.mysqlStorage.OXContextMySQLStorage		hosting.properties:1
CREATE_CONTEXT_USE_UNIT	context	what to count when distributing contexts over db engines possible values: context or user	hosting.properties:11
CHECK_CONTEXT_LOGIN_MAPPING_REGEXP	[$%\\.+a-zA-Z0-9_-]	pattern of allowed chars in login mapping names	hosting.properties:14
NEW_CONTEXT_DEFAULT_ACCESS_COMBINATION_NAME	webmail_plus	Default access combination template name for newly created contexts! See also "ModuleAccessDefinitions" file for details! If the name is NOT defined in "ModuleAccessDefinitions" file , fallback will be used!	hosting.properties:19
UTIL_STORAGE	com.openexchange.admin.storage.mysqlStorage.OXUtilMySQLStorage		hosting.properties:2
AVERAGE_CONTEXT_SIZE	200	Misc properties average size of a context in MB	hosting.properties:6
CONTEXTS_PER_SCHEMA	1000	amount of contexts per database schema	hosting.properties:8
com.openexchange.imap.storeContainerType	boundary-aware	An IMAP connection cache acts a temporary keep-alive cache for already connected resources to an IMAP server's account. Meaning it keeps a resource open/connected for a short amount of time (see "com.openexchange.mail.mailAccessCacheIdleSeconds") and performs a "close elapsed ones" run periodically (see "com.openexchange.mail.mailAccessCacheShrinkerSeconds"). In addition to that behavior there are two modes of operation - bounded and unbounded. For an unbounded cache, set this property to "unbounded". Thus a user is allowed to establish as many connections to his IMAP account as demanded by his active clients (Web UI, EAS, Outlook OXtender, etc.). A bounded cache allows only as many concurrently opened resources as specified through "com.openexchange.imap.maxNumConnections" property. Taking the wording "resource" was chosen by intention, since two types of resource abstractions exist: IMAP store and IMAP protocol (an authenticated login's socket connection). The default setting "boundary-aware" considers an "IMAP store" as limited resources to an IMAP server. The vague thing about IMAP store is that it maintains a connection pool internally by itself. Thus it is possible that there are actually more active socket connections open than specified, because an IMAP store is allowed to open further connections when needed; e.g. when accessing another IMAP folder while INBOX has been opened, too. Practical experience showed that there will be at max.: "com.openexchange.imap.maxNumConnections" + 1 The setting "non-caching" does an exact mapping of resource to an established/authenticated socket connection to the IMAP account. It is named "non-caching" as it does no caching on its own, but delegates it to a custom queuing 'com.sun.mail.imap.IMAPStore' class. Thus an exact limitation of connected socket connections ('com.sun.mail.imap.protocol.IMAPProtocol' instances) is achieved. Specifying a quite small limitation - let's say "1" - arises the possibility that JavaMail gets dead-locked by itself. E.g. an IMAP store attempts to create a second connection. That attempt may get stalled as it waits for itself to free the already acquired connection which never happens. So, please use this exact mapping only if you specify a reasonable limitation. Default is "boundary-aware"	imap.properties:114
com.openexchange.imap.maxNumExternalConnections	imap.gmail.com:2,imap.googlemail.com:2	Configure the max. number of concurrent connections which are allowed being established to a subscribed/external IMAP account. Notation is a comma-separated list of: <host> + ':' + <max-count>; e.g.: com.openexchange.imap.maxNumExternalConnections=imap.host1.com:4, imap.host2.com:6 For convenience a max-count can be specified which applies to all subscribed/external IMAP accounts; e.g.: com.openexchange.imap.maxNumExternalConnections=4 Zero or less is interpreted as unlimited. If not set, unlimited concurrent connections are allowed.	imap.properties:123
com.openexchange.imap.enableTls	true	Enables the use of the STARTTLS command (if supported by the server) to switch the connection to a TLS-protected connection.	imap.properties:126
com.openexchange.imap.notifyRecent	false	Notify about recent messages using mail push events. This is a poll-based alternative for any connection-keeping mail push bundle.	imap.properties:129
com.openexchange.imap.imapSearch	imap	Define where to search for emails: Value "imap" to let the IMAP Server search. The search is done on IMAP server if a mailbox' size exceeds the mailFetchLimit as defined in mail.properties. Leave blank or fill in value "application" to search within application.	imap.properties:13
com.openexchange.imap.notifyFrequencySeconds	300	The frequency when a check for recent mails is enforced.	imap.properties:132
com.openexchange.imap.notifyFullNames	INBOX	The full names of the folders to consider.	imap.properties:135
com.openexchange.imap.maxMailboxNameLength	60	The max. length of a mailbox name Default is 60 characters	imap.properties:139
com.openexchange.imap.invalidMailboxNameCharacters		Specifies a space-separated list of characters that are not allowed to be contained in a mailbox name; e.g. >>com.openexchange.imap.invalidMailboxNameCharacters="; / . | \\"<< Default is empty.	imap.properties:144
com.openexchange.imap.allowFolderCaches	true	Enables/disables caching of IMAP folders. Default is true. Note: Only disable IMAP folder cache if you certainly know what you are doing. Disabling that cache may result in noticeable performance decrease.	imap.properties:150
com.openexchange.imap.umlautFilterThreshold	50	Specify the threshold for number of search results returned by IMAP server for which manual umlauts-filtering will be applied. If less than or equal to zero, no manual filtering will be applied. Default value is 50.	imap.properties:18
com.openexchange.imap.imapFastFetch	true	This property determines whether a fast fetch is performed on large mail folders or not. Although the fetch is fast on IMAP side, a lot of data is transfered during reading response which cause a temporary memory peak. If disabled only the necessary fields are used as command arguments, which is slower but needs less memory. NOTE: See property "imapMessageFetchLimit" to know which mail folders are treated as large mail folders	imap.properties:27
com.openexchange.imap.imapSupportsACL	auto	Define if IMAP server supports ACLs. Possible values: true/false/auto NOTE: Value "auto" means to use server-defined ACL support as indicated through response to IMAP command "CAPABILITY"	imap.properties:32
com.openexchange.imap.imapTimeout	50000	Define the socket I/O timeout value in milliseconds. A value less than or equal to zero is infinite timeout. See also mail.imap.timeout	imap.properties:36
com.openexchange.imap.imapConnectionTimeout	20000	Define the socket connection timeout value in milliseconds. A value less or equal to zero is infinite timeout. See also mail.imap.connectiontimeout	imap.properties:40
com.openexchange.imap.imapTemporaryDown	10000	Define the amount of time in milliseconds an IMAP server is treated as being temporary down. An IMAP server is treated as being temporary down if a socket connect fails. Further requests to the affected IMAP server are going to be denied for the specified amount of time. A value less or equal to zero disables this setting.	imap.properties:46
com.openexchange.imap.failedAuthTimeout	10000	The number of milliseconds a failed authentication attempt is cached to faster handle subsequent authentication attempts Default is 10 seconds.	imap.properties:51
com.openexchange.imap.imapAuthEnc	UTF-8	Define the encoding for IMAP authentication	imap.properties:54
com.openexchange.imap.User2ACLImpl	auto	Name of the class that implements User2ACL, their alias or "auto" to use auto-detection. Currently known aliases: Cyrus, Courier, Dovecot, and Sun (Sun Java(tm) System Messaging Server)	imap.properties:58
com.openexchange.imap.blockSize	1000	IMAP operations which shall be applied to a number of messages which exceeds the block size are performed in blocks. Example: A folder containing thousands of messages shall be cleared. To avoid the risk of an IMAP timeout when trying to delete all messages at once, the messages are deleted in block size portions. A block size equal to or less than zero means no block size.	imap.properties:65
com.openexchange.imap.spamHandler	DefaultSpamHandler	Define the registration name of the appropriate spam handler to use	imap.properties:68
com.openexchange.imap.imapSort	imap	Define where to sort emails: Value "imap" to let the IMAP Server sort (faster but less reliable). Leave blank or fill in value "application" to sort within application (slower but good quality). The sorting is done on IMAP server if a mailbox' size exceeds the mailFetchLimit as defined in mail.properties. NOTE: This value is going to be set to "application" if IMAP server capabilities do not contain string "SORT"	imap.properties:7
com.openexchange.imap.propagateClientIPAddress	false	Whether client's IP address should be propagated by a NOOP command; e.g. "A01 NOOP <CLIENT_IP>"	imap.properties:71
com.openexchange.imap.propagateHostNames		Configure a comma-separated list of external IMAP server's host names which should receive client's IP address by a NOOP command, too	imap.properties:74
com.openexchange.imap.maxNumConnections	0	The max. number of connection allowed being established for a user to an IMAP server. Less than or equal to zero means infinite. Please also consider "com.openexchange.imap.storeContainerType". Note: This setting overrides possibles restrictions specified through property "com.openexchange.imap.maxNumExternalConnections" if this property's value is less than the other one. Default is 0 (zero).	imap.properties:83
IMAP_TIMEOUT	5000	Socket I/O timeout value in milliseconds	imapauth.properties:11
IMAP_CONNECTIONTIMEOUT	5000	Socket connection timeout value in milliseconds	imapauth.properties:14
IMAP_SERVER	localhost	imap server ip or fqdn	imapauth.properties:2
USE_FULL_LOGIN_INFO	true	############################################# Set to true to auth with "user@domain" instead of just "user" against imap server. If true the "domain" part will be used as the context name of the ox system. so add "domain" as a login mapping to be able to login. If false, the plugin react as only 1 context exists in the ox system, and this context has the mapping "defaultcontext" added.	imapauth.properties:22
USE_MULTIPLE	false	######## MULTIPLE IMAP SERVERS ############# If set to true the IMAP authentication plugin gets all IMAP server information from the OX database instead of reading configuration from this file. Following information is fetched from DB and will be used to authenticate against the server: - server - port - ssl/tls Moreover the proper login name is detected as configured by property "com.openexchange.mail.loginSource". To use this feature, set the correct values while provisioning an OX user. Useful if you have many IMAP Servers to connect to. ##### INFO: Domain part of the login is used as context name. Example: test@test.org Username of the OX account must be "test" and name of the OX context must be "test.org"	imapauth.properties:47
IMAP_PORT	143	port on which the imap server is listening	imapauth.properties:5
com.openexchange.authentication.imap.imapAuthEnc	UTF-8	Define the encoding for IMAP authentication	imapauth.properties:51
IMAP_USE_SECURE	false	set to true if connecting via imaps://	imapauth.properties:8
com.openexchange.index.allowedModules		Specify all modules that may be indexed as a comma-separated list of module identifiers (these are numbers defined in http://oxpedia.org/wiki/index.php?title=HTTP_API#LinkObject). The default value is empty and disables indexing as a whole. This value takes effect on server granularity and can be overwritten for sets of contexts, single contexts and single users. See http://oxpedia.org/wiki/index.php?title=ConfigCascade and /ox-config-path/contextSets/index.yml for more information on this. Possible modules: E-Mail: 19 As of now only E-Mail can be enabled. Enabling other modules may lead to unforseen errors during runtime.	index.properties:16
com.openexchange.service.indexing.workerThreads	4	The number of worker threads for the clustered job scheduler instance that executes the indexing jobs. More worker threads allow it to run more indexing jobs at the same time, but will also increase the load of the worker node. It is recommended to start with a number not higher than the nodes number of CPU cores. Increasing the number afterwards always requires a restart of the node.	indexing-service.properties:6
translator.get_request	com.openexchange.index.solr.internal.querybuilder.translators.IdListTranslator		infostore-querybuilder.properties:1
get_request.id_field	uuid		infostore-querybuilder.properties:2
translator.all_request	com.openexchange.index.solr.internal.querybuilder.translators.AllTranslator		infostore-querybuilder.properties:4
MAX_UPLOAD_SIZE	10485760		infostore.properties:7
com.openexchange.jolokia.servlet.name	/monitoring/jolokia	Under what servlet name jolokia will be published, please bear in mind that this should not be forwarded by apache and kept internal	jolokia.properties:11
com.openexchange.jolokia.user		User used for authentication with HTTP Basic Authentication. If not given, no authentication is used.	jolokia.properties:14
com.openexchange.jolokia.password		Password used for authentification, if not set "secret" is used. Only needed if com.openexchange.jolokia.user is used	jolokia.properties:17
com.openexchange.jolokia.maxDepth	0	Maximum depth when traversing bean properties. If set to 0, depth checking is disabled	jolokia.properties:20
com.openexchange.jolokia.maxObjects	100000	Maximum number of objects which are traversed when serializing a single response. Use this as an airbag to avoid boosting your memory and network traffic. Nevertheless, when set to 0 no limit is imposed.	jolokia.properties:24
com.openexchange.jolokia.restrict.to.localhost	true	This setting will restrict jolokia access to localhost. It is completly ignored when a jolokia-access.xml is present	jolokia.properties:27
com.openexchange.jolokia.start	false	Start jolokia	jolokia.properties:8
com.openexchange.kerberos.proxyDelimiter	+	Define a delimiter to be used to separate proxy authentication from normal user login on the frontend login screen. If defined, a proxy user can login on behalf of a user using the form <PROXYACCOUNT><DELIMITER><USERACCOUNT>. NOTE: Login to the mail server is not supported. The implementation for mail filter implementation based on SIEVE protocol does not support a proxy authentication, so it will raise error messages.	kerberos.properties:15
com.openexchange.kerberos.proxyUser		Comma separated list of proxy user logins allowed to login as a proxy user for every other user account.	kerberos.properties:18
java.security.auth.login.config	/opt/open-xchange/etc/kerberosLogin.conf	path to the Java authentication and authorization configuration file	kerberos.properties:21
sun.security.krb5.debug	true	enable kerberos debugging	kerberos.properties:24
java.security.krb5.conf	/opt/open-xchange/etc/krb5.conf	path to the krb5.conf configuration file java.security.krb5.conf=/etc/krb5.conf	kerberos.properties:28
com.openexchange.kerberos.moduleName	Open-Xchange	Name of the module in the authentication and authorization configuration file. Must be an entry in the file named by java.security.auth.login.config.	kerberos.properties:5
com.openexchange.kerberos.userModuleName	Open-Xchange-User-Auth	Name of the module in the authentication and authorization configuration file used for username and password authentication. Must be an entry in the file named by java.security.auth.login.config	kerberos.properties:9
com.openexchange.langdetect.languageModelsDir	languageModels	The path to the directory containing the language models	lang-detect.properties:4
com.openexchange.langdetect.languageCodesFile	language-codes.properties	Maps language to their code	lang-detect.properties:7
com.sun.jndi.ldap.connect.timeout	10000	Timeouts are useful to get quick responses for login requests. This timeout is used if a new connection is established.	ldapauth.properties:12
com.sun.jndi.ldap.read.timeout	10000	This timeout only works since Java 6 SE to time out waiting for a response.	ldapauth.properties:15
uidAttribute	uid	This attribute is used login. E.g. uid=<login>,baseDN	ldapauth.properties:18
baseDN	ou=Users,ou=OxObjects,dc=open-xchange,dc=com	This is the base distinguished name where the user are located.	ldapauth.properties:21
ldapReturnField		If you do not want to pass on the user id, used for authentication, to the groupware but another field entry of the LDAP user object, then you can specify the field here.	ldapauth.properties:26
adsBind	false	This option activates a special ADS bind. It allows the user to authenticate at the ADS with only the displayName or by using the syntax DOMAIN\Samaccountname. Note that "\" cannot be used in user names when this option is activated.	ldapauth.properties:32
subtreeSearch	false	set subtreeSearch to true if the user entries are not directly below the baseDN, and e.g. distributed over one or more subtrees. The bindDN to authenticate the user will then determined using a search over the complete tree below baseDN NOTE: When two users exist with the same uidAttribute, authentication will be refused, though.	ldapauth.properties:40
searchFilter	(objectclass=posixAccount)	specify the filter to limit the search of user entries (used in combination with subtreeSearch=true. the filter will be ANDed with the attributed specified in uidAttribute. Example: (&(objectclass=posixAccount)(uid=foo))	ldapauth.properties:47
java.naming.provider.url	ldap://localhost:389/dc=example,dc=com	URL of the LDAP server to connect to for authenticating users. ldaps is supported.	ldapauth.properties:5
bindDN		if your LDAP server does not allow to do searches without any authentication, specify a dn here to bind in order to search (used in combination with subtreeSearch=true).	ldapauth.properties:52
bindDNPassword		the password required for the bindDN	ldapauth.properties:55
referral	follow	This option configures how to handle the chasing of referrals in LDAP (see http://java.sun.com/products/jndi/tutorial/ldap/referral/overview.html). possible values: ignore, follow, throw	ldapauth.properties:60
java.naming.security.authentication	simple	Defines the authentication security that should be used.	ldapauth.properties:8
com.openexchange.liberty.appstore.url	http://marketplace.kumoki.info/bss-ox-integration/command	Where to send the app store requests	liberty.properties:2
com.openexchange.liberty.appstore.storefront	http://marketplace.kumoki.info/fujitsu-bss-portal/marketplace/logindirect.jsf?mId=FUJITSU&u=[user]&p=[password]	Where to redirect the user for the BSS	liberty.properties:5
com.openexchange.liberty.appstore.gateway	http://html5gateway.mch.fsc.net/rdpdirect.html		liberty.properties:7
com.openexchange.liberty.appstore.gatewayQuery	gateway=172.24.56.23&server=172.24.56.147&keyboard=1031&user=ox-fwp\\[user]&pwd=[password]&startProgram=app&exe=||[app]&args=%22[path]%22		liberty.properties:8
com.openexchange.licensekey.1	OX-AS-MK-123456-789		licensekeys.properties:1
modules/themes/light_breeze	Light Breeze	The following property defines the light breeze theme of the AJAX GUI.	light-breeze-theme.properties:4
com.openexchange.oauth.linkedin	false	Enable/disable LinkedIn OAuth support	linkedinoauth.properties:2
com.openexchange.socialplugin.linkedin.apikey	REPLACE_THIS_WITH_THE_KEY_FROM_YOUR_LINKEDIN_APP	These keys are either pre-filled or need to be replaced by ones gotten from an application managed at linkedIn for information how to create this application please see http://oxpedia.org/wiki/index.php?title=LinkedIn_Bundles	linkedinoauth.properties:6
com.openexchange.socialplugin.linkedin.apisecret	REPLACE_THIS_WITH_THE_SECRET_FROM_YOUR_LINKEDIN_APP		linkedinoauth.properties:7
com.openexchange.subscribe.socialplugin.linkedin	true		linkedinsubscribe.properties:1
com.openexchange.subscribe.socialplugin.linkedin.autorunInterval	1d		linkedinsubscribe.properties:2
log4j.rootLogger	ERROR, console		log4j.properties:1
log4j.rootLogger	ERROR, console		log4j.properties:1
log4j.appender.console	org.apache.log4j.ConsoleAppender		log4j.properties:3
log4j.appender.console	org.apache.log4j.ConsoleAppender		log4j.properties:3
log4j.appender.console	org.apache.log4j.ConsoleAppender		log4j.properties:3
log4j.appender.console.layout	org.apache.log4j.PatternLayout		log4j.properties:4
log4j.appender.console.layout	org.apache.log4j.PatternLayout		log4j.properties:4
log4j.appender.console.layout	org.apache.log4j.PatternLayout		log4j.properties:4
log4j.appender.console.layout.ConversionPattern	%d{dd.MM.yyyy HH:mm:ss} [%t] %-5p %c{1} - %m%n		log4j.properties:5
log4j.appender.console.layout.ConversionPattern	%d{dd.MM.yyyy HH:mm:ss} [%t] %-5p %c{1} - %m%n		log4j.properties:5
log4j.appender.console.layout.ConversionPattern	%d{dd.MM.yyyy HH:mm:ss} [%t] %-5p %c{1} - %m%n		log4j.properties:5
log4j.logger.de.kippdata	INFO,console		log4j.properties:7
log4j.logger.com.hazelcast	TRACE,console		log4j.properties:7
log4j.logger.com.hazelcast	TRACE,console		log4j.properties:7
log4j.logger.com.openexchange.realtime.hazelcast	TRACE,console		log4j.properties:8
log4j.logger.org.apache.solr	WARN,console		log4j.properties:8
log4j.logger.com.openexchange.realtime.hazelcast	TRACE,console		log4j.properties:8
log4j.logger.org.apache.solr.analysis	ERROR,console		log4j.properties:9
com.openexchange.login.internal.LoginPerformer.level	INFO	Important note: The following option ensures, that all login relevant information is logged correctly. Such information is essential to detect and to address session issues, pontentially caused by 3rd parties. Open-Xchange strongly suggests NOT to modify this configuration setting unless you are forced to do so by specific legal requirements, e.g. privacy regulations. Please note: If these settings are changed, Open-Xchange will take no responsibility and will exclude support regarding any session issues and potential security breaches arising thereof.	logging.properties:15
com.openexchange.sessiond.impl.SessionHandler.level	INFO		logging.properties:16
sun.rmi.level	INFO		logging.properties:18
org.apache.level	WARNING		logging.properties:19
.level	INFO	possible log levels are ALL INFO DEBUG	logging.properties:2
com.sun.level	INFO		logging.properties:20
javax.management.level	INFO		logging.properties:21
com.hazelcast.level	SEVERE		logging.properties:22
com.openexchange.documentconverter.impl.IManager.level	WARNING		logging.properties:23
handlers	java.util.logging.ConsoleHandler		logging.properties:4
java.util.logging.ConsoleHandler.level	ALL		logging.properties:5
com.openexchange.ajax.login.http-auth.client	com.openexchange.ox.gui.dhtml	Every client tells the backend through the client parameter on the login request his identity. This is not possible when using the HTTP authorization header based login. So the client identifier for that request is defined here. It must be the same identifier that the web frontend uses, if you set com.openexchange.cookie.hash to calculate and want the previously configured autologin to work. Identifier for web UI is: com.openexchange.ox.gui.dhtml	login.properties:14
com.openexchange.ajax.login.http-auth.version	HTTP Auth	The version of the client when using the HTTP Authorization Header based login. This should not be the normal web frontend version because a different version can be used to distinguish logins through HTTP authorization header and normal login request.	login.properties:18
com.openexchange.ajax.login.insecure	false	Configures whether an insecure login is allowed. Meaning if local IP and/or user-agent strings are replaced in associated user session on login redirect or login redeem requests. To create a session from a server for some client you have to pass the clients IP address when creating the session. WARNING! Setting this parameter to true may result in users seeing a different users content if the infrastructure around OX does not work correctly.	login.properties:30
com.openexchange.ajax.login.redirect.changeIPAllowed	true	This option has only an effect if com.openexchange.ajax.login.insecure is configured to true. This option allows to enable the IP check for /ajax/login?action=redirect requests. This request is mostly used to create a session without using the OX web UI login screen. The previous behavior allowed to change the IP for this request. Configure this option to false to have an IP check during this request. Additionally you can white list IP addresses from that an IP change is still allowed. This is useful if other systems in the infrastructure around OX want to create the session.	login.properties:37
com.openexchange.ajax.login.randomToken	false	The Random-Token is a one time token with a limited lifetime, which is used to initiate sessions through 3rd party applications or websites. It is a UUID, generated by the backend via default Java UUID implementation. This token is deprecated and disabled by default. Setting this to false will prevent a random token from being written as part of the login response and prevent logins via a random token.	login.properties:43
com.openexchange.ajax.login.http-auth.autologin	false	Configures if some user is able to reenter his existing session after closing the browser tab or the complete browser. Setting this to true may be a security risk for clients running on unsafe computers. If this is configured to true, check that the parameter client contains the same identifier the UI sends as client parameter on normal login request. Otherwise the backend will not be able to rediscover the users session after closing the browser tab. This parameter only applies to the HTTP authorization header based login request.	login.properties:8
strategy	SimpleStrategy	two options here either SimpleStrategy or NetworkTopologyStrategy	loxandra.properties:13
node	192.168.33.37:9160	node ip with port eg. node = 127.0.0.1:9160	loxandra.properties:3
keyspace	OX	keyspace name	loxandra.properties:6
replication_factor	3	replication factor of the keyspace	loxandra.properties:9
com.openexchange.push.allowedClients	"USM-EAS*", "USM-JSON*"	Specify the comma-separated list of clients which are allowed to receive notifications about new mails. Wild-card notation is allowed.	mail-push.properties:5
com.openexchange.mail.watcherTime	60000	Define exceeding time in milliseconds for mail connections. If use time of an mail connection exceeds this value it is logged. Thus unclosed connections can be detected.	mail.properties:104
com.openexchange.mail.watcherShallClose	false	Define if watcher is allowed to close exceeded mail connections	mail.properties:107
com.openexchange.mail.JavaMailProperties	javamail.properties	JavaMail Properties	mail.properties:110
com.openexchange.mail.phishingHeader		A comma-separated list of headers which identifies phishing headers; e.g. X-Phishing1,X-Phishing2,etc. Leave empty for no phishing header.	mail.properties:115
com.openexchange.mail.adminMailLoginEnabled	false	Define whether a context admin is allowed to login to mail system or not. Note that a mail account is supposed to exist if set to true; if not an authentication error will occur.	mail.properties:120
com.openexchange.mail.addClientIPAddress	false	Set whether client's IP address should be added to mail headers on delivery as custom header "X-Originating-IP"	mail.properties:124
com.openexchange.mail.rateLimitPrimaryOnly	true	Define if the rateLimit and maxToCcBcc settings below will only affect the primary account or all accounts	mail.properties:128
com.openexchange.mail.rateLimit	0	Define the time (in milliseconds) which must pass by before a new mail can be sent A value of 0 disables the limit.	mail.properties:132
com.openexchange.mail.maxToCcBcc	0	Define the allowed maximum number of recipients in a mail A value of 0 disables the limit.	mail.properties:136
com.openexchange.mail.passwordSource	session	Set the password source for primary mail/transport account; meaning which source is taken to determine a user's password to login into mailing system. If 'session' is set, then user's individual system's password is taken. If 'global' is set, then the value specified through property 'com.openexchange.mail.masterPassword' is taken. Currently known values: session and global	mail.properties:14
com.openexchange.mail.hidePOP3StorageFolders	false	Whether folders which carry a POP3 account shall not be displayed. This property affects primary account only.	mail.properties:140
com.openexchange.mail.deleteDraftOnTransport	false	Whether to delete draft messages when sent out Note: Client MUST provide appropriate value in "sendtype" field; see http://oxpedia.org/wiki/index.php?title=HTTP_API#Send_a_mail	mail.properties:145
com.openexchange.mail.supportMsisdnAddresses	false	Define if MSISDN addresses are supported or not.	mail.properties:148
com.openexchange.mail.translateDefaultFolders	true	If set to 'false', translation of names of the mail default folders is not performed, if naming differs from pre-defined default values. Thus custom set names can be specified for Trash, Drafts, Sent & Spam folder. By default this value is 'true'. Pre-defined names are: "Trash" "Drafts" "Sent objects" "Spam"	mail.properties:160
com.openexchange.mail.maxMailSize	-1	Specifies the max. mail size allowed being transported A value of zero or less means infinite. Default is -1 (infinite)	mail.properties:173
com.openexchange.mail.hideDetailsForDefaultAccount	false	Whether to hide rather technical data from JSON representation of the primary mail account e.g. port, server name, secure flag, etc. Default is false	mail.properties:178
com.openexchange.mail.maxForwardCount	8	Specifies the max. number of message attachments that are allowed to be forwarded as attachment Default is 8	mail.properties:182
com.openexchange.mail.mailServerSource	user	Set the mail server source for primary mail account; meaning which source is taken to determine the mail server into which the user wants to login to access mails. Set to 'global' to take the value specified through property "com.openexchange.mail.mailServer". Set to 'user' to take user's individual mail server settings as specified in storage. Currently known values: user and global	mail.properties:21
com.openexchange.mail.transportServerSource	user	Set the transport server source for primary transport account; meaning which source is taken to determine the transport server into which the user wants to login to transport mails. Set to 'global' to take the value specified through property "com.openexchange.mail.transportServer". Set to 'user' to take user's individual transport server settings as specified in storage. Currently known values: user and global	mail.properties:28
com.openexchange.mail.masterPassword	secret	The master password for primary mail/transport server. Only takes effect when property "com.openexchange.mail.passwordSource" is set to "global"	mail.properties:32
com.openexchange.mail.mailServer	127.0.0.1	Primary mail server: e.g. 192.168.178.32:8143 or imap://192.168.178.32:7143 Only takes effect when property "com.openexchange.mail.mailServerSource" is set to "global"	mail.properties:36
com.openexchange.mail.transportServer	127.0.0.1	Primary transport server: e.g. 192.168.178.32:125 or smtp://192.168.178.32:225 Only takes effect when property "com.openexchange.mail.transportServerSource" is set to "global"	mail.properties:40
com.openexchange.mail.defaultMailProvider	imap	The mail provider fallback if an URL does not contain/define a protocol	mail.properties:43
mail.mime.charset	UTF-8	Define the default MIME charset used for character encoding. This setting will then be accessible through system property "mail.mime.charset". This parameter takes effect for the complete mail module where no charset is given.	mail.properties:48
com.openexchange.mail.mailFetchLimit	1000	Define the max. fetch limit; meaning all mails whose count is less than or equal to this value are going to be fetched with all attributes set. Thus these mails can be put into message cache for subsequent list requests.	mail.properties:53
com.openexchange.mail.attachmentDisplaySizeLimit	8192	maximum size of email text attachments that will be displayed inline ( in bytes)	mail.properties:57
com.openexchange.mail.mailAccessCacheShrinkerSeconds	3	Define the interval seconds of the mail access cache's shrinker thread	mail.properties:60
com.openexchange.mail.mailAccessCacheIdleSeconds	4	Define the idle seconds a mail access may reside in mail access cache before it is removed by shrinker thread	mail.properties:63
com.openexchange.mail.quoteLineColors	#a14044,#917722,#599351,#516193,#666666	Comma-separated hex values of colors for displaying quoted text emails	mail.properties:66
com.openexchange.mail.userFlagsEnabled	true	Enable/disable user defined flags	mail.properties:69
com.openexchange.mail.loginSource	login	Set the login source for primary mail/transport account; meaning which source is taken to determine a user's login for mailing system. If 'login' is set, then user's individual mail login as defined in user storage is taken. If 'mail' is set, then user's individual primary email address is taken. If 'name' is set, then user's individual system's user name is taken. Currently known values: login, mail, and name	mail.properties:7
com.openexchange.mail.partModifierImpl	com.openexchange.mail.partmodifier.DummyPartModifier	Define the implementing class of PartModifier. This class is then be used to manipulate the email before displaying.	mail.properties:73
com.openexchange.mail.allowNestedDefaultFolderOnAltNamespace	false	This property defines if the default folders of an user (Draft, Sent, Spam & Trash) are going to be placed right below folder "INBOX" even if feature "altNamespace" is enabled. NOTE: This property requires that subfolders are still permitted below initial folder "INBOX" even though "altNamespace" is enabled.	mail.properties:80
com.openexchange.mail.ignoreSubscription	false	Defines if folder subscription is ignored when listing mail folders If set to 'true', all folders - regardless of their subscription status - are going to be listed	mail.properties:85
com.openexchange.mail.supportSubscription	true	Define if underlying store should support subscription	mail.properties:88
com.openexchange.mail.defaultSeparator	/	Define the separator within folder fullnames if not available from mail server	mail.properties:91
com.openexchange.mail.watcherEnabled	true	The watcher checks after watcherFrequency for mail connections used for more than watcherTime milliseconds and logs this mail connection. If watcherShallClose is set to true those connections will be closed.	mail.properties:96
com.openexchange.mail.watcherFrequency	10000	Define watcher's frequency in milliseconds	mail.properties:99
SIEVE_CREDSRC	session	Specify which sieve credentials should be use. Two options are allowed here: "session" : login name and password are used from the current session "session-full-login" : full login (incl. context part) name and password are used from the current session "imapLogin" : the login name is taken from the field imapLogin of the current user the password is taken from the current session "mail" : use the primary mail address of the user and the password from the session	mailfilter.properties:13
SIEVE_SERVER	localhost	to override the sieve server defaults specify a value for the sieve server here	mailfilter.properties:16
SIEVE_PORT	2000	Specify the SIEVE port ----------------------------------------------------------- NOTE: 2000 is the deprecated port number for SIEVE (now assigned to some Cisco SCCP protocol by the IANA) 4190 is the new one used with most recent Linux and IMAP implementations. Please check your system's default port defined at /etc/services. -----------------------------------------------------------	mailfilter.properties:24
SCRIPT_NAME	Open-Xchange	If you want the script to be generated with another script name change it here. Note that the mail filter bundle will then leave the old script with the old script name behind, and doesn't delete it	mailfilter.properties:29
SIEVE_AUTH_ENC	UTF-8	Define the charset encoding to use for authentication to sieve server	mailfilter.properties:32
NON_RFC_COMPLIANT_TLS_REGEX	^Cyrus.*v([0-1]\\.[0-9].*|2\\.[0-2].*|2\\.3\\.[0-9]|2\\.3\\.[0-9][^0-9].*)$	Define the regex which recognizes servers with incorrect sieve TLS implementation	mailfilter.properties:35
TLS	true	Whether to use TLS if available	mailfilter.properties:38
SIEVE_LOGIN_TYPE	user	Specify which sieve server should be used. Two options are allowed here: user : use the imap server setting stored for user in the database global : use the sieve server given in this config file for all users	mailfilter.properties:4
VACATION_DOMAINS		Specify here if vacation messages should only be sent to specific domains If multiple domains are given, they should be separated by "," e.g. VACATION_DOMAINS=testdomain.com,example.com	mailfilter.properties:43
com.openexchange.mail.filter.connectionTimeout	30000	Specifies when the connection should time out (value in milliseconds)	mailfilter.properties:46
com.openexchange.mail.filter.passwordSource	session	Set the password source; meaning which source is taken to determine a user's password to login into mail filter system. If 'session' is set, then user's individual system's password is taken. If 'global' is set, then the value specified through property 'com.openexchange.mail.filter.masterPassword' is taken. Currently known values: session and global	mailfilter.properties:53
com.openexchange.mail.filter.masterPassword		The master password for mail/transport server. Only takes effect when property "com.openexchange.mail.filter.passwordSource" is set to "global"	mailfilter.properties:57
com.openexchange.mail.filter.useUTF7FolderEncoding	false	Cyrus imap server uses MODIFIED UTF-7 encoding for folder names in older versions. This has to be set to 'true' if a cyrus imap server is used whose version is lower than 2.3.11. Otherwise moving mails with the 'fileinto' command will not work for mail folders with special characters in their names.	mailfilter.properties:62
com.openexchange.mail.filter.punycode	false	Enable punycode encoding for the username used in authentication against the managesieve server	mailfilter.properties:65
com.openexchange.mail.filter.useSIEVEResponseCodes	false	interpret SIEVE Response Codes, see https://tools.ietf.org/html/rfc5804#section-1.3 in most cases, this option must be kept to false	mailfilter.properties:69
com.openexchange.mail.filter.redirectWhitelist		Specify a comma-separated list of domains (wild-card syntax supported) that are allowed for redirect rules	mailfilter.properties:72
com.openexchange.mail.filter.preferGSSAPI	false	Specify whether to prefer GSSAPI authentication mechanism if supported by SIEVE backend Default is false.	mailfilter.properties:76
com.openexchange.push.malpoll.concurrentglobal	true	Whether the tasks executed by global timer are executed concurrently or by calling timer's thread. Note: This property only has effect if "com.openexchange.push.malpoll.global" is set to "true"	malpoll.properties:14
com.openexchange.push.malpoll.folder	INBOX	Define the folder to look-up for new mails in each mailbox Default is INBOX folder	malpoll.properties:18
com.openexchange.push.malpoll.period	300000	Define the amount of time in milliseconds when to periodically check for new mails. Default is 300000 (5 minutes).	malpoll.properties:3
com.openexchange.push.malpoll.global	true	Whether a global timer is set or a timer per user Or in other words: Do you want a global heartbeat or a heartbeat per per user? Default is true.	malpoll.properties:8
JMXBindAddress	localhost	Define the bind address for JMX agent Use value "*" to let the JMX monitor bind to all interfaces	management.properties:11
JMXLogin		Define the JMX login for authentication Leaving this property empty means not to use authentication	management.properties:15
JMXPassword		Define the JMX password in SHA hashed version This property only has effect if previous property "JMXLogin" is set. The following perl command can be used to generate such a password: perl -M'Digest::SHA1 qw(sha1_base64)' -e 'print sha1_base64("YOURSECRET")."=\n";' that requires to install the Digest::SHA1 perl module, of course.	management.properties:25
JMXPort	9999	Define the port for the RMI Registry. The default is 9999.	management.properties:3
JMXServerPort	-1	Define the JMX RMI Connector Server port. Typically chosen randomly by JVM. The default is -1; meaning that port is randomly determined by JVM	management.properties:7
com.openexchange.messaging.enabled	true	Determines whether messaging is enabled for this server	messaging.properties:2
com.openexchange.subscribe.microformats.contacts.http	true		microformatSubscription.properties:1
com.openexchange.subscribe.microformats.infostore.http	true		microformatSubscription.properties:2
com.openexchange.subscribe.microformats.contacts.http.autorunInterval	1d		microformatSubscription.properties:3
com.openexchange.subscribe.microformats.infostore.http.autorunInterval	1d		microformatSubscription.properties:4
com.openexchange.subscribe.microformats.allowedHosts		Optionally specifies the list of accepted host names allowed being subscribed If property is empty, there is no restriction for such subscriptions Otherwise non-matching host names are rejected.	microformatSubscription.properties:9
iPhoneTemplate.tmpl	mobile_configuration		mobile.configuration.generator.properties:1
winMobileTemplate.tmpl	mobile_configuration		mobile.configuration.generator.properties:2
com.openexchange.oauth.msn	false	Enable/disable MSN OAuth support	msnoauth.properties:2
com.openexchange.oauth.msn.apiKey	REPLACE_THIS_WITH_VALUE_OBTAINED_FROM_MSN		msnoauth.properties:4
com.openexchange.oauth.msn.apiSecret	REPLACE_THIS_WITH_VALUE_OBTAINED_FROM_MSN		msnoauth.properties:5
com.openexchange.subscribe.socialplugin.msn	true		msnsubscribe.properties:1
com.openexchange.subscribe.socialplugin.msn.autorunInterval	1d		msnsubscribe.properties:2
notify_participants_on_delete	true		notification.properties:27
object_link	http://[hostname]/[uiwebpath]#m=[module]&i=[object]&f=[folder]		notification.properties:35
imipForInternalUsers	false	Enables/Disables imip-mails for internal users.	notification.properties:38
com.openexchange.notification.fromSource	defaultSenderAddress	This property defines which email address of a user is used as from header when this user triggers notification mails. Possible values are: primaryMail or defaultSenderAddress	notification.properties:42
com.openexchange.oauth.provider.validator.maxVersion	1.0	The maximum valid oauth_version Default value is 1.0.	oauth-provider.properties:13
com.openexchange.oauth.provider.validator.v2.maxTimestampAgeMsec	300000	The range of valid time stamps, in milliseconds into the past or future. So the total range of valid time stamps is twice this value, rounded to the nearest second. Default value is 5 minutes (300000).	oauth-provider.properties:18
com.openexchange.oauth.provider.validator.v2.maxVersion	2.0	The maximum valid OAuth v2 version Default value is 2.0.	oauth-provider.properties:22
com.openexchange.oauth.provider.secret	f58c636e089745d4a79679d726aca8b5	The secret identifier	oauth-provider.properties:4
com.openexchange.oauth.provider.validator.maxTimestampAgeMsec	300000	The range of valid time stamps, in milliseconds into the past or future. So the total range of valid time stamps is twice this value, rounded to the nearest second. Default value is 5 minutes (300000).	oauth-provider.properties:9
com.openexchange.oauth.callback	false	Sets whether call-back policy is enabled when performing OAuth authentication If false; oob (out-of-band) is used which requires user interaction to provide the verifier (pin) Default is false	oauth.properties:6
RMI_HOSTNAME	rmi://localhost:1099/	admin daemon rmi URL	open-xchange-admin-soap.properties:14
LOCK_WAIT_TIME	10	How long (in seconds) the system should wait for a lock before throwing exceptions	open-xchange-admin-soap.properties:20
MAX_RMI_CONNECT_ATTEMPTS	2	maximum attempts to reconnect to the admin daemon	open-xchange-admin-soap.properties:4
CONNECT_ATTEMPTS_DELAY_TIME	1	time in seconds to wait between connect attempts	open-xchange-admin-soap.properties:9
modules/com.openexchange.help/module	true		open-xchange-gui-help-plugin.properties:1
additionalPackages			osgiTest.properties:1
additionalPackages	org.eclipse.equinox.event_1.3.0.v20130327-1442.jar		osgiTest.properties:1
mox/config/mailCount	50		oxmobile.properties:1
mox/config/defaultContactFolder	"private"	can be one of "none", "private" or "global". "none" : no folder is selected by default, the user will be asked on first start "private" : default private addressbook is selected for the user "global" : global addressbook is selected by default for the user	oxmobile.properties:12
mox/config/appointmentDays	10		oxmobile.properties:2
mox/config/maxAppointmentBreak	50		oxmobile.properties:3
mox/subscribedFolders/contacts	[]		oxmobile.properties:4
mox/subscribedFolders/mail	[]		oxmobile.properties:5
mox/subscribedFolders/calendar	[]		oxmobile.properties:6
mox/defaultContactStoreFolder	-1		oxmobile.properties:7
modules/com.openexchange.custom.parallels/module	true	The following property enables the Parallels GUI-Plugins	parallels-ui.properties:2
ui/parallels/sender_address_hiding_activated	true	disable/enable default sender address hiding for POA setups	parallels-ui.properties:5
ui/parallels/use_parallels_antispam_features	true	should the parallels antispam features be used	parallels-ui.properties:8
com.openexchange.custom.parallels.branding.suffix		The following defines the options for the branding stuff set via "loginmapping" attributes within a context in OX. Example: If want to brand a context, set a login mapping with a string like this: BRANDING||<YOUR_POA_BRANDED_HOST> com.openexchange.custom.parallels.branding.suffix=BRANDING|| Leave empty if not, or the log will fill up with warnings	parallels.properties:16
com.openexchange.custom.parallels.branding.fallbackhost		Fallback host which should be used if now branding-host was specified for a context Info: If you need trailing slash, add it here. For compatibility reasons it will not be appended by the server to support also jumping to server scripts IMPORTANT INFO: the notification.properties attribute: "object_link" MUST be set to include the [hostname] placeholder like: https://[hostname]#m=[module]&i=[object]&f=[folder] If this is not set, the systems hostname is used.	parallels.properties:29
com.openexchange.custom.parallels.antispam.xmlrpc.port	3100	This port will be used to communicate with the "POA XML-RPC Service" to retrieve correct spamd hostname and user so that OX can train spamd via socket communication THIS property below must only contain URL to OX GUI like webmail.system.com/ox6	parallels.properties:38
com.openexchange.custom.parallels.openapi.interface_url	http://<coreserver>:<port>/	# OpenAPI properties for managing Black&White Lists via OX GUI This property defines the URL to the HTTP OpenAPI interface of POA	parallels.properties:44
com.openexchange.custom.parallels.openapi.auth_enabled	false	This property defines if OpenAPI calls should be made with http basic auth	parallels.properties:48
com.openexchange.custom.parallels.sso_info_servlet	/ajax/parallels/info	Properties for the Parallels Plugin The property defines the mount point of the parallels info servlet used to retrieve correct hostname for direktlinks and sessiontimeouts/logout page	parallels.properties:5
com.openexchange.custom.parallels.openapi.auth_id	openapi_user_id	This property defines OpenAPI http basic auth credentials auth id	parallels.properties:52
com.openexchange.custom.parallels.openapi.auth_password	openapi_password	This property defines OpenAPI http basic auth credentials auth password	parallels.properties:56
com.openexchange.custom.parallels.openapi_servlet	/ajax/parallels/openapi	The property defines the mount point of the OX OpenAPI servlet implementation. Typically, no need to change it.	parallels.properties:61
com.openexchange.participant.autoSearch	true	When searching for participants and the participants selection dialog is opened this option defines if initially all users, groups and resources are displayed or not. If this option is true every opening of the dialog triggers a search request on the server.	participant.properties:13
com.openexchange.participant.MaximumNumberParticipants	0	Defines the maximum number of participants that can be selected for an appointment or a task. This should prevent slow free busy queries and slow server and GUI responses if in large contexts large number of participants are selected. 0 means no limit.	participant.properties:19
com.openexchange.participant.ShowWithoutEmail	true	When searching for external participants in contact folders this option defines if contacts without email address are shown.	participant.properties:7
com.openexchange.passcrypt.key	5ce1bcd8175f43ecaf5c809f66bd2dfb	The key for password-based encryption to encrypt/decrypt passwords	passcrypt.properties:4
com.openexchange.passwordchange.regexp	[^a-z0-9]	Defines the class of allowed special characters as Regular Expression.	passwordchange.properties:11
com.openexchange.passwordchange.special	$, _, or %	Shows an example of allowed special characters to the user. Should be a subset of "regexp" in a human readable format.	passwordchange.properties:14
com.openexchange.passwordchange.showStrength	false	Show a widget, which displays the current passwort Strength while entering.	passwordchange.properties:2
com.openexchange.passwordchange.minLength	4	The minimum length of an entered password.	passwordchange.properties:5
com.openexchange.passwordchange.maxLength	0	The maximum length of an entered password. 0 for unlimited.	passwordchange.properties:8
com.openexchange.capability.filestore	true	Signal if file store is available or not Default is true	permissions.properties:9
com.openexchange.pop3.pop3TemporaryDown	10000	Define the amount of time in milliseconds a POP3 server is treated as being temporary down. A POP3 server is treated as being temporary down if a socket connect fails. Further requests to the affected POP3 server are going to be denied for the specified amount of time. A value less or equal to zero disables this setting.	pop3.properties:13
com.openexchange.pop3.pop3AuthEnc	UTF-8	Define the encoding for POP3 authentication	pop3.properties:16
com.openexchange.pop3.spamHandler	DefaultSpamHandler	Define the registration name of the appropriate spam handler to use	pop3.properties:19
com.openexchange.pop3.pop3ConnectionIdleTime	300000	Define the amount of time in milliseconds an established POP3 connection is kept open although being idle. Since some POP3 servers limit the time period in which connections may be opened/closed, this property allows to keep the connection open to avoid an error on a subsequent login. This property overwrites default connection idle time specified through property "com.openexchange.mail.mailAccessCacheIdleSeconds".	pop3.properties:27
com.openexchange.pop3.pop3Timeout	50000	Define the socket I/O timeout value in milliseconds. A value less than or equal to zero is infinite timeout. See also mail.pop3.timeout	pop3.properties:3
com.openexchange.pop3.pop3BlockSize	100	Specify the number of messages (positive integer!) which are allowed to be processed at once. Default is 100. Zero or negative value is defaulted to 100.	pop3.properties:32
com.openexchange.pop3.allowPing	false	Whether ping operation is allowed for POP3 account Many POP3 account limit number of allowed login attempts in a certain time interval Default is false	pop3.properties:37
com.openexchange.pop3.logDeniedPing	true	Whether denied ping operation shall be indicated as a warning to client Only effective if "com.openexchange.pop3.allowPing" is set to false. Default is true	pop3.properties:42
com.openexchange.pop3.pop3ConnectionTimeout	20000	Define the socket connection timeout value in milliseconds. A value less or equal to zero is infinite timeout. See also mail.pop3.connectiontimeout	pop3.properties:7
com.openexchange.preview.cache.quotaPerDocument	524288	Specify the quota per document for preview cache for each context This value is used if no individual quota per document is defined. A value of zero or less means no quota Default is 524288 (512KB)	preview.properties:13
com.openexchange.preview.cache.type	FS	Specifies what type of storage is used for caching previews Either file store ("FS") or database ("DB"). Default is "FS" (file store)	preview.properties:18
com.openexchange.preview.cache.quotaAware	false	Specifies if storing previews in file store affects user's file store quota or not Only applies if "com.openexchange.preview.cache.type" is set to "FS" Default is false.	preview.properties:23
com.openexchange.preview.cache.quota	10485760	Specify the total quota for preview cache for each context This value is used if no individual context quota is defined. A value of zero or less means no quota Default is 10485760 (10MB)	preview.properties:7
com.openexchange.http.probe.alias	/healthProbe	The alias name in the URI namespace at which the probe is registered Default value: /healthProbe	probe.properties:9
com.openexchange.publish.microformats.usesWhitelisting	true	if set to true, the contents of a microformatted publication will be processed through a whitelisting filter that removes elements that are considered potentially unsafe. We recommend you use this in case you do not have publications on a different subdomain.	publications.properties:5
contacts_hcard_censored.tmpl	contacts, publish, default		publish.microformats.properties:1
contacts_hcard_uncensored.tmpl	contacts, publish		publish.microformats.properties:2
contacts_oxmf_censored.tmpl	contacts, publish		publish.microformats.properties:3
contacts_oxmf_uncensored.tmpl	contacts, publish		publish.microformats.properties:4
contacts.tmpl	contacts, publish		publish.microformats.properties:5
infostore.tmpl	infostore, publish, default		publish.microformats.properties:7
infostore_gallery.tmpl	infostore, publish		publish.microformats.properties:8
com.openexchange.push.ms.maxDelayDuration	600000	The maximum time in milliseconds a push object may be delayed before finally pushing it to the clients Default value: 600000	push-ms.properties:10
com.openexchange.push.ms.delayDuration	120000	Time in milliseconds after which a queued object object is pushed to clients unless it got delayed again due to modifications of the push object within the delayDuration or modifications within the folder of the push object. Default value: 120000	push-ms.properties:5
com.openexchange.push.udp.remoteHost		list of open-xchange servers that should be connected when multicast is disabled	push-udp.properties:10
com.openexchange.push.udp.registerTimeout	3600000	time in milliseconds a client registration is kept	push-udp.properties:13
com.openexchange.push.udp.registerPort	44335	Port where the clients send the push registration request to.	push-udp.properties:16
com.openexchange.push.udp.registerDistributionEnabled	false	only one of registerDistribution or eventDistribution can be enabled at the same time. if set to true, registrations are distributed to all ox servers	push-udp.properties:21
com.openexchange.push.udp.eventDistributionEnabled	false	if set to true, events will be distributed to all Open-Xchange servers	push-udp.properties:23
com.openexchange.push.udp.outputQueueDelay	120000	time in milliseconds after which queued "push" packages are sent to clients	push-udp.properties:26
com.openexchange.push.udp.hostname		if empty, then the output of the java function getHostName will be used. This name is used for internal communication.	push-udp.properties:30
com.openexchange.push.udp.senderAddress		address used as the sender address when UDP packages are sent to the clients (should be the IP address of the load balancer in front of the Open-Xchange server farm	push-udp.properties:35
com.openexchange.push.udp.multicastEnabled	false	true/false Send register information per multicast	push-udp.properties:38
com.openexchange.push.udp.multicastAddress	224.0.0.1	IP multicast address	push-udp.properties:41
com.openexchange.push.udp.multicastPort	9982	Multicast port	push-udp.properties:44
com.openexchange.push.udp.pushEnabled	false	defines if server push port gets opened or not	push-udp.properties:6
com.openexchange.push.imapidle.pushmode	always	when to fire push events? possible values: newmail,always default: always Explanation: newmail means to only send a push event in case of at least one new mail has arrived. NOTE: Using dovecot this does only work when only ONE concurrent session of the same user is active. always send a push event for every changes to the users mailbox.	push_imapidle.properties:18
com.openexchange.push.imapidle.debug	false	since commons logging is hard to configure, do it our own using LOG.info when debug is on here	push_imapidle.properties:21
com.openexchange.push.imapidle.folder	INBOX	Define the folder to look-up for new mails in each mailbox Default is INBOX folder	push_imapidle.properties:3
com.openexchange.push.imapidle.errordelay	2000	waiting time in milliseconds before a reconnect when an error happens during IDLE	push_imapidle.properties:7
com.openexchange.push.mail.notify.udp_listen_multicast	false	Define if the listener should receive multicast messages	push_mailnotify.properties:2
com.openexchange.push.mail.notify.use_ox_login	false	Whether to use the ox login name to check for a valid push event. The default is to only check the users aliases. If mailboxname@example.com is not contained in the list of aliases, set this to true. Warning: This won't work in multidomain setups where the same login might exist in different contexts!	push_mailnotify.properties:23
com.openexchange.push.mail.notify.use_full_email_address	false	Whether to use the full email address from aliases or just use the localpart. When using a multidomain setup where the imap login is an email address, this should be set to true. If not, login might not be unique because foo@example.com and foo@example.net might be different users. Note: Do NOT set com.openexchange.push.mail.notify.imap_login_delimiter in this case!	push_mailnotify.properties:32
com.openexchange.push.mail.notify.udp_listen_host	localhost	Define the hostname or interface/multicast group where the udp server should listen	push_mailnotify.properties:5
com.openexchange.push.mail.notify.udp_listen_port	23420	Define the port where the udp server should listen	push_mailnotify.properties:8
com.openexchange.quartz.startLocalScheduler	true	Wether the local quartz scheduler instance should be started. If false, this node is unable to perform local jobs.	quartz.properties:3
com.openexchange.quartz.localThreads	5	Number of worker threads for the local scheduler instance.	quartz.properties:6
com.openexchange.quota.contact	-1	The quota for contacts	quota.properties:10
com.openexchange.quota.infostore	-1	The quota for infostore files	quota.properties:13
com.openexchange.quota.calendar	-1	The quota for appointments	quota.properties:4
com.openexchange.quota.task	-1	The quota for tasks	quota.properties:7
com.openexchange.realtime.isTraceAllUsersEnabled	false	Enable tracing for all users. Default value: false	realtime.properties:18
com.openexchange.realtime.usersToTrace		Enable tracing only for a set of users e.g.: userA@context1, userB@context1, userC@context2 Default value: empty set	realtime.properties:22
errorMessage	Error!!!	The displayd error Message.	recaptcha.properties:11
publicKey		The API Key to use the recaptcha Service This is hosted by Google, so you need an Google Account to receive API Keys Go to: http://www.google.com/recaptcha to generate keys. Use the global-key option to avoid domain restrictions.	recaptcha.properties:7
privateKey			recaptcha.properties:8
com.openexchange.report.client.proxy.useproxy	false	This defines if a proxy server should be used to establish the http connection to the Open-Xchange report server, and if which server and proxy details to use.	reportclient.properties:3
com.openexchange.report.client.proxy.address	proxy.example.com		reportclient.properties:4
com.openexchange.report.client.proxy.port	8080		reportclient.properties:5
com.openexchange.report.client.proxy.authrequired	false		reportclient.properties:6
com.openexchange.report.client.proxy.username	USER		reportclient.properties:7
com.openexchange.report.client.proxy.password	PASSWORD		reportclient.properties:8
com.openexchange.requestwatcher.isEnabled	true	Enable/disable the requestwatcher. Default value: true (enabled).	requestwatcher.properties:13
com.openexchange.requestwatcher.frequency	30000	Define the requestwatcher's frequency in milliseconds. Default value: 30000.	requestwatcher.properties:17
com.openexchange.requestwatcher.maxRequestAge	60000	Define the maximum allowed age of requests in milliseconds. Default value: 60000.	requestwatcher.properties:21
com.openexchange.requestwatcher.restartPermission	false	Permission to stop & re-init system (works only for the ajp connector)	requestwatcher.properties:24
RESELLER_STORAGE	com.openexchange.admin.reseller.storage.mysqlStorage.OXResellerMySQLStorage		reseller.properties:1
com.openexchange.rmi.host	localhost	Set this to 0 to bind on all interfaces	rmi.properties:2
com.openexchange.rmi.port	1099		rmi.properties:4
com.openexchange.messaging.rss	true	Whether the RSS Messaging Service is available or not	rssmessaging.properties:2
com.openexchange.hazelcast.configuration.map.backupCount	1	Number of backups. If 1 is set as the backup-count for example, then all entries of the map will be copied to another JVM for fail-safety. 0 means no backup.	rtIDMapping.properties:11
com.openexchange.hazelcast.configuration.map.asyncBackupCount	0	Number of nodes with async backups. Async backups do not block operations and do not require acknowledgements. 0 means no backup. Any integer between 0 and 6. Default is 0, setting bigger than 6 has no effect.	rtIDMapping.properties:16
com.openexchange.hazelcast.configuration.map.readBackupData	true	Can we read the local backup entries? Default value is false for strong consistency. Being able to read backup data will give you greater performance.	rtIDMapping.properties:21
com.openexchange.hazelcast.configuration.map.name	rtIDMapping-1	The name of the map. Don't change this on your own.	rtIDMapping.properties:24
com.openexchange.hazelcast.configuration.map.backupCount	1	Number of backups. If 1 is set as the backup-count for example, then all entries of the map will be copied to another JVM for fail-safety. 0 means no backup.	rtResourceDirectory.properties:11
com.openexchange.hazelcast.configuration.map.asyncBackupCount	0	Number of nodes with async backups. Async backups do not block operations and do not require acknowledgements. 0 means no backup. Any integer between 0 and 6. Default is 0, setting bigger than 6 has no effect.	rtResourceDirectory.properties:16
com.openexchange.hazelcast.configuration.map.readBackupData	true	Can we read the local backup entries? Default value is false for strong consistency. Being able to read backup data will give you greater performance.	rtResourceDirectory.properties:21
com.openexchange.hazelcast.configuration.map.name	rtResourceDirectory-2	The name of the map. Don't change this on your own.	rtResourceDirectory.properties:24
com.openexchange.hazelcast.configuration.map.maxIdleSeconds	86400	Maximum number of seconds for each entry to stay idle in the map. Entries that are idle (not touched) for more than <max-idle-seconds> will get automatically evicted from the map. Entry is touched if get, put or containsKey is called. Any integer between 0 and Integer.MAX_VALUE. 0 means infinite.	rtResourceDirectory.properties:31
com.openexchange.hazelcast.configuration.map.backupCount	1	Number of backups. If 1 is set as the backup-count for example, then all entries of the map will be copied to another JVM for fail-safety. 0 means no backup.	rtStanzaStorage.properties:11
com.openexchange.hazelcast.configuration.map.asyncBackupCount	0	Number of nodes with async backups. Async backups do not block operations and do not require acknowledgements. 0 means no backup. Any integer between 0 and 6. Default is 0, setting bigger than 6 has no effect.	rtStanzaStorage.properties:16
com.openexchange.hazelcast.configuration.map.readBackupData	true	Can we read the local backup entries? Default value is false for strong consistency. Being able to read backup data will give you greater performance.	rtStanzaStorage.properties:21
com.openexchange.hazelcast.configuration.map.name	rtStanzaStorage-0	The name of the map. Don't change this on your own.	rtStanzaStorage.properties:24
com.openexchange.hazelcast.configuration.map.maxIdleSeconds	3600	Maximum number of seconds for each entry to stay idle in the map. Entries that are idle (not touched) for more than <max-idle-seconds> will get automatically evicted from the map. Entry is touched if get, put or containsKey is called. Any integer between 0 and Integer.MAX_VALUE. 0 means infinite.	rtStanzaStorage.properties:31
com.openexchange.secret.secretSource	"<password>"	Specifies the source for secret (used to decrypt/encrypt user passwords) <password>: Denotes the session's password (also the fall-back to previous handling) <user-id>: Denotes the user identifier <context-id>: Denotes the context identifier <random>: Denotes the value specified in property 'com.openexchange.secret.secretRandom' <list>: Step-wise trial-and-error with tokens specified in file 'secrets' Literals are surrounded by single-quotes E.g. com.openexchange.secret.secretSource="<user-id> + '@' + <context-id>"	secret.properties:11
com.openexchange.secret.secretRandom	eb495148-a9f8-441e-8a28-dcb9eecd60f9	The random secret token	secret.properties:14
com.openexchange.cookie.hash	calculate	Whether the hash value for the cookie name should be calculated or remembered from the session for each request. Possible values are: calculate (default) - Calculate hash from client login paramater and HTTP header User-Agent (may be modified through c.o.cookie.hash.fields) remember - remember once calculated hash in session and use it for the whole session life time (less secure)	server.properties:101
com.openexchange.cookie.hash.salt	replaceMe1234567890	Cookie hash salt to avoid a potential brute force attack to cookie hashes. This value should be replaced by any random String with at least 16 Characters.	server.properties:105
com.openexchange.forceHTTPS	false	If an HTTPS connection is detected the cookie is automatically marked as secure. This tells the browser only to send the cookie over encrypted connections. If HTTPS is terminated in front by some load balancer only HTTP is detected. Then this parameter can force to set the secure flag for cookies. Additionally all links generated inside the groupware to point at itself will use the https:// protocol prefix when this is set. Use this flag to indicate that HTTPS termination happens elsewhere.	server.properties:111
com.openexchange.servlet.maxActiveSessions	250000	The maximum number of active sessions that will be created by this Manager, or -1 for no limit. Default is 250.000 HTTP sessions	server.properties:115
UPLOAD_DIRECTORY	/var/spool/open-xchange/uploads	Upload Parameter. All uploads that are done by a client are temporarily saved in that directory.	server.properties:12
com.openexchange.servlet.maxInactiveInterval	1800	The initial maximum time interval, in seconds, between client requests before a session is invalidated. A negative value will result in sessions never timing out. If the attribute is not provided, a default of 1800 seconds is used.	server.properties:120
com.openexchange.servlet.maxBodySize	104857600	Specify the maximum body size allowed being transferred via PUT or POST method A request exceeding that limit will be responded with a 500 error and that request is discarded Equal or less than zero means no restriction concerning body size By default limit is set to 100MB (104857600 bytes).	server.properties:126
com.openexchange.servlet.echoHeaderName	X-Echo-Header	Specify the name of the echo header whose value is echoed for each request providing that header	server.properties:129
com.openexchange.servlet.contentSecurityPolicy	""	The value of Content-Security-Policy header Please refer to An Introduction to Content Security Policy (http://www.html5rocks.com/en/tutorials/security/content-security-policy/) Default value is empty; meaning no Content-Security-Policy header	server.properties:134
com.openexchange.servlet.maxRateTimeWindow	300000	Specify the rate limit' time window in which to track incoming HTTP requests Default value is 300000 (5 minutes).	server.properties:138
com.openexchange.servlet.maxRate	1500	Specify the rate limit that applies to incoming HTTP requests A client that exceeds that limit will receive a "429 Too Many Requests" HTTP error code That rate limit acts like a sliding window time frame; meaning that it considers only requests that fit into time windows specified through "com.openexchange.servlet.maxRateTimeWindow" from current time stamp: window-end := $now window-start := $window-end - $maxRateTimeWindow Default value is 1500 requests per $maxRateTimeWindow (default: 5 minutes).	server.properties:147
com.openexchange.servlet.maxRateLenientModules	rt, system	Specify those AJAX-accessible modules which are excluded from the rate limit checks Default value: rt, system	server.properties:151
com.openexchange.servlet.maxRateLenientClients	"Open-Xchange .NET HTTP Client*", "Open-Xchange USM HTTP Client*", "Jakarta Commons-HttpClient*"	Specify (wildcard notation supported) those User-Agents which are excluded from the rate limit checks Default value: "Open-Xchange .NET HTTP Client*", "Open-Xchange USM HTTP Client*", "Jakarta Commons-HttpClient*"	server.properties:155
com.openexchange.servlet.maxRateKeyPartProviders		Specify how to associate a rate limit with a HTTP request By default a rate limit is associated with that tuple of { remote-address, user-agent } This does not apply to all scenarios. Therefore it is possible to specify more parts in a comma-separated list that build up the key. Possible values are: - "http-session"  := The identifier of the request-associated HTTP session aka JSESSIONID cookie - "cookie-" + <cookie-name>  := Specifies the (ignore-case) name of the arbitrary cookie whose value is considered. If missing it is ignored. - "header-" + <header-name>  := Specifies the (ignore-case) name of the arbitrary header whose value is considered. If missing it is ignored. - "parameter-" + <parameter-name>  := Specifies the (ignore-case) name of the arbitrary parameter whose value is considered. If missing it is ignored. E.g. com.openexchange.servlet.maxRateKeyPartProviders=cookie-My-Secret-Cookie, parameter-request_num Default is empty; meaning only remote-address and user-agent are considered	server.properties:169
com.openexchange.log.propertyNames	com.openexchange.ajpv13.remoteAddress(ERROR),com.openexchange.ajpv13.remotePort(ERROR),com.openexchange.session.userId(DEBUG),com.openexchange.session.contextId(DEBUG),com.openexchange.session.clientId(DEBUG)	Specify property names as comma-separated list. One of: - com.openexchange.ajpv13.threadName - com.openexchange.ajpv13.remotePort - com.openexchange.ajpv13.remoteAddress - com.openexchange.ajpv13.requestId - com.openexchange.session.sessionId - com.openexchange.session.userId - com.openexchange.session.contextId Furthermore a log level may be appended to each name to specify at what log level implies the property being logged E.g. com.openexchange.ajpv13.remoteAddress(ERROR),com.openexchange.session.userId(DEBUG),com.openexchange.session.contextId(DEBUG) If no loe level is specified, the property is logged with each log output	server.properties:183
com.openexchange.log.maxMessageLength	-1	Specifies max. message length to log. Messages that exceed that limit are split. A value of less than 1 means unlimited. Default is -1 (unlimited)	server.properties:188
com.openexchange.json.maxSize	2500	Specify the max. number of allowed attributes for a JSON object	server.properties:191
com.openexchange.webdav.disabled	false	Setting this to true means that the WebDav XML servlets for attachments, calendar, contacts and tasks will be disabled. On requests to these servlets a service-not-available (503) response will be sent. See "webdav-disabled-message.txt" to customize the detailed error message that will be sent.	server.properties:196
com.openexchange.ajax.response.includeStackTraceOnError	false	Whether the JSON response object should provide the stack trace of the associated exception	server.properties:199
MAX_UPLOAD_SIZE	104857600	If the sum of all uploaded files in one request is greater than this value, the upload will be rejected. This value can be overridden on a per-module basis by setting the MAX_UPLOAD_SIZE parameter in the modules config file (attachment.properties or infostore.properties). Or it can be overriden on a per-user basis by setting the upload_quota in the mail configuration of this user If this value is set to 0 and not overridden by the module config or user config uploads will be unrestricted. The size is in bytes.	server.properties:20
com.openexchange.connector.networkListenerHost	127.0.0.1	The host for the connector's (ajp, http) network listener. Set to "*" if you want to listen on all available interfaces. Default value: 127.0.0.1, bind to localhost only.	server.properties:204
com.openexchange.connector.networkListenerPort	8009	The default port for the connector's (ajp, http) network listener. Default value: 8009.	server.properties:208
com.openexchange.connector.maxRequestParameters	30	Specify the max. number of allowed request parameters for the connector (ajp, http) Default value: 30	server.properties:212
com.openexchange.server.backendRoute	OX0	To enable proper load balancing and request routing from {client1, client2 .. .} --> balancer --> {backend1, backend2 ...} we have to append a backend route to the JSESSIONID cookies separated by a '.'. It's important that this backend route is unique for every single backend behind the load balancer. The string has to be a sequence of characters excluding semi-colon, comma and white space so the JSESSIONID cookie stays in accordance with the cookie specification after we append the backendroute to it. Default value: OX0	server.properties:222
com.openexchange.server.considerXForwards	true	Decides if we should consider X-Forward-Headers that reach the backend. Those can be spoofed by clients so we have to make sure to consider the headers only if the proxy/proxies reliably override those headers for incoming requests. Default value: true	server.properties:228
com.openexchange.server.forHeader	X-Forwarded-For	The name of the protocolHeader used to identify the originating IP address of a client connecting to a web server through an HTTP proxy or load balancer. This is needed for grizzly based setups that make use of http proxying. If the header isn't found the first proxy in front of grizzly will be used as originating IP/remote address. Default value: X-Forwarded-For	server.properties:236
com.openexchange.server.knownProxies		A list of know proxies in front of our httpserver/balancer as comma separated IPs e.g: 192.168.1.50, 192.168.1.51	server.properties:239
MAX_UPLOAD_IDLE_TIME_MILLIS	300000	The max. idle time in milliseconds for an uploaded file temporary stored in upload directory	server.properties:24
com.openexchange.server.fullPrimaryKeySupport	false	This mechanism can be enabled to support primary keys for all tables. CAUTION: This feature should be set to 'true' only if you are really sure that your environment supports it. Otherwise you endanger to not be able to get back to a previous ox installation.	server.properties:244
com.openexchange.html.css.parse.timeout	4	Specify the amount of seconds to wait for a CSS content being parsed This property influences parsing of HTML messages. If CSS could not be parsed in time, CSS is stripped from message's content. Default value is 4	server.properties:249
MAX_BODY_SIZE	0	The max. HTTP body size Zero or less means infinite. /!\ Deprecated: Use "com.openexchange.servlet.maxBodySize" instead /!\	server.properties:29
com.openexchange.defaultMaxConcurrentAJAXRequests	100	The default max. number of allowed concurrent requests per user This property only has effect if no individual value has been specified for active user A value less than or equal to zero means infinite	server.properties:34
DefaultEncoding	UTF-8	DEFAULT ENCODING FOR INCOMING HTTP REQUESTS This value MUST be equal to web server's default encoding	server.properties:38
com.openexchange.MinimumSearchCharacters	0	Minimum number of characters a search pattern must contain. 0 means no minimum. This should prevent slow searches for contacts or big responses in large contexts.	server.properties:43
PUBLISH_REVOKE		e-mail address of a person that can be called if data has been published and the actual owner of the data objects to the publication. If removed or left empty, the e-maill address of the context admin is used.	server.properties:48
com.openexchange.IPCheck	true	On session validation of every request the client IP address is compared with the client IP address used for the login request. If this configuration parameter is set to "true" and the client IP addresses do not match the request will be denied and the denied request is logged with level info. Setting this parameter to "false" will only log the different client IP addresses with debug level. WARNING! This should be only set to "false" if you know what you are doing and if all requests are secure - requests are always encrypted by using HTTPS.	server.properties:56
com.openexchange.IPMaskV4		Subnet mask for accepting IP-ranges. Using CIDR-Notation for v4 and v6 or dotted decimal only for v4. Examples: com.openexchange.IPMaskV4=255.255.255.0 com.openexchange.IPMaskV4=/24 com.openexchange.IPMaskV6=/60	server.properties:64
com.openexchange.IPMaskV6			server.properties:65
com.openexchange.IPCheckWhitelist		Specify a comma-separated list of client patterns that do bypass IP check E.g. com.openexchange.IPCheckWhitelist="Mobile App*", "Foo*"	server.properties:69
com.openexchange.UIWebPath	/ox6/index.html	Configures the path on the web server where the UI is located. This path is used to generate links directly into the UI. The default conforms to the path where the UI is installed by the standard packages on the web server. This path is used for the [uiwebpath]. For the Open-Xchange 6 frontend the path needs to be configured to "/ox6/index.html" which is still the default. For the App Suite frontend the path needs to be configured to "/appsuite/".	server.properties:75
com.openexchange.dispatcher.prefix	/ajax/	Specify the prefix for Central Dispatcher framework (the Open-Xchange AJAX interface)	server.properties:78
PrefetchEnabled	true	Enable or disable SearchIterator prefetch. If prefetch is enabled the underlying ResultSet data is completely stored and all related resources are released immediately when creating a SearchIterator. Possible values: TRUE / FALSE	server.properties:8
com.openexchange.cookie.ttl	1W	The time-to-live for session, secret and JSESSIONID cookie. Note: Time-to-live is only relevant for session and secret cookie, if autologin is enabled as well. Autologin is configured in sessiond.properties by "com.openexchange.sessiond.autologin" property. Can contain units of measurement: D (=days) W(=weeks) H(=hours). Special identifier "web-browser" to let the Cookie(s) be deleted when the Web browser exits	server.properties:87
com.openexchange.cookie.httpOnly	true	Whether the "; HttpOnly" should be appended to server cookies exits	server.properties:90
com.openexchange.sessiond.maxSessionPerClient	0	Specify the number of sessions allowed per client (Web UI, EAS, WebDAV, ...) and user. A value equal to or less than zero means unlimited	sessiond.properties:13
com.openexchange.sessiond.sessionDefaultLifeTime	3600000	Life time of a session in the short term session containers. After this time the session is put into the long life time container and all temporary session data is removed. This only applies if com.openexchange.sessiond.autologin is enabled. Short term session containers are rotated every 6 minutes. Therefore this value should be a multiple of 6 minutes.	sessiond.properties:18
com.openexchange.sessiond.sessionLongLifeTime	1W	This amount of time a session can live without any interaction, if com.openexchange.sessiond.autologin is enabled. First the session lives in the short term session container, see configuration option com.openexchange.sessiond.sessionDefaultLifeTime. Then the session is moved into the long term session container. The session can be restored from here, but it won't have any temporary session data anymore. Restoring temporary session data may cause some slower functionality and maybe temporary errors on image, proxy data or the like. The overall time a session can live is defined by this option. The life time in the long term session container is the time configured here subtracted by the time in the short term session container. Can contain units of measurement: D(=days) W(=weeks) H(=hours) M(=minutes). Long term session containers are rotated every hour. Therefore this value should be a multiple of 1 hour.	sessiond.properties:28
com.openexchange.sessiond.randomTokenTimeout	30000	The random token to access a newly created session is valid for this configured time. Can contain units of measurement: D(=days) W(=weeks) H(=hours) M(=minutes).	sessiond.properties:32
com.openexchange.sessiond.autologin	false	Whether autologin is allowed or not	sessiond.properties:35
com.openexchange.sessiond.encryptionKey	auw948cz,spdfgibcsp9e8ri+<#qawcghgifzign7c6gnrns9oysoeivn	Key to encrypt passwords during transmission during session migration. Change this, and make sure it's the same in the entire cluster	sessiond.properties:42
com.openexchange.sessiond.asyncPutToSessionStorage	true	Specify if sessions shall be put asynchronously to session storage Default is true	sessiond.properties:46
com.openexchange.sessiond.maxSession	50000	Maximum number of concurrent sessions, 0 stands for unlimited	sessiond.properties:6
com.openexchange.sessiond.maxSessionPerUser	100	Maximum number of concurrent sessions per user, a value less than or equal to zero means unlimited	sessiond.properties:9
com.openexchange.hazelcast.configuration.map.backupCount	1	Number of backups. If 1 is set as the backup-count for example, then all entries of the map will be copied to another JVM for fail-safety. 0 means no backup.	sessions.properties:11
com.openexchange.hazelcast.configuration.map.asyncBackupCount	0	Number of nodes with async backups. Async backups do not block operations and do not require acknowledgements. 0 means no backup. Any integer between 0 and 6. Default is 0, setting bigger than 6 has no effect.	sessions.properties:16
com.openexchange.hazelcast.configuration.map.readBackupData	true	Can we read the local backup entries? Default value is false for strong consistency. Being able to read backup data will give you greater performance.	sessions.properties:21
com.openexchange.hazelcast.configuration.map.name	sessions-6	The name of the map. Don't change this on your own.	sessions.properties:24
com.openexchange.hazelcast.configuration.map.maxIdleSeconds	640000	Maximum number of seconds for each entry to stay idle in the map. Entries that are idle (not touched) for more than <max-idle-seconds> will get automatically evicted from the map. Entry is touched if get, put or containsKey is called. Any integer between 0 and Integer.MAX_VALUE. 0 means infinite. To avoid unnecessary eviction, the value should be higher than the configured 'com.openexchange.sessiond.sessionLongLifeTime' in 'sessiond.properties'. Defaults to 640000 (a bit more than a week).	sessions.properties:33
com.openexchange.sessionstorage.nosql.enabled	true		sessionstorage_nosql.properties:1
com.openexchange.sessionstorage.nosql.host	192.168.32.75		sessionstorage_nosql.properties:3
com.openexchange.sessionstorage.nosql.port	9160		sessionstorage_nosql.properties:4
com.openexchange.sessionstorage.nosql.keyspace	OX		sessionstorage_nosql.properties:5
com.openexchange.sessionstorage.nosql.cfname	SessionStorage		sessionstorage_nosql.properties:6
com.openexchange.sessionstorage.nosql.sessionLifetime	604800		sessionstorage_nosql.properties:8
com.openexchange.mail.smal.blacklist	*	Specify host names of mail backends that shall be excluded from index access. If set to *, only the primary mail account is allowed to be indexed. Leave empty to allow indexing for all external mail accounts. Example: gmail.com,googlemail.com	smal.properties:8
com.openexchange.smtp.smtpAuthentication	true	Enable/disable SMTP Authentication	smtp.properties:12
com.openexchange.smtp.setSMTPEnvelopeFrom	false	Defines if SMTP header ENVELOPE-FROM should be explicitly set to user's primary email address or not	smtp.properties:16
com.openexchange.smtp.smtpTimeout	50000	Define the socket I/O timeout value in milliseconds. A value less than or equal to zero is infinite timeout. See also mail.smtp.timeout	smtp.properties:20
com.openexchange.smtp.smtpConnectionTimeout	10000	Define the socket connection timeout value in milliseconds. A value less or equal to zero is infinite timeout. See also mail.smtp.connectiontimeout	smtp.properties:24
com.openexchange.smtp.smtpLocalhost	null	The localhost name that is going to be used on SMTP's HELO or EHLO command. The default is set to InetAddress.getLocalHost().getHostName() but if either JDK or name service are not configured properly, this routine fails and the HELO or EHLO command is send without a name which leads to an error: "501 HELO requires domain address" The value "null" falls back to InetAddress.getLocalHost().getHostName() which works in most cases.	smtp.properties:6
com.openexchange.smtp.smtpAuthEnc	UTF-8	Define the encoding for SMTP authentication	smtp.properties:9
com.openexchange.nosql.cassandra.snappyjava.nativelibs	@oxsnappydir@/lib	Path for native libs	snappy.properties:2
com.openexchange.soap.cxf.baseAddress		Specify the base address for published end points; e.g. "http://www.myserver.com/myservices" Default is empty; meaning to use running machine's address	soap-cxf.properties:5
com.openexchange.soap.cxf.hideServiceListPage	false	Specify whether to hice service list page Default is false	soap-cxf.properties:9
com.openexchange.solr.solrHome	/opt/open-xchange/solr	This is the path to the home directory of the embedded Solr server. Don't change this unless you know what you are doing!	solr.properties:10
com.openexchange.solr.libDir	/opt/open-xchange/solr/lib	This is the path to the library directory of the embedded Solr server. Don't change this unless you know what you are doing!	solr.properties:14
com.openexchange.solr.configDir	/opt/open-xchange/solr/conf	This is the path to the configuration directory of the embedded Solr server. Don't change this unless you know what you are doing!	solr.properties:18
com.openexchange.solr.schemaMail	/opt/open-xchange/solr/conf/schema-mail.xml	This is the path to the schema file for the mail index. Don't change this unless you know what you are doing!	solr.properties:22
com.openexchange.solr.configMail	/opt/open-xchange/solr/conf/solrconfig-mail.xml	This is the path to the configuration file for the mail index. Don't change this unless you know what you are doing!	solr.properties:26
com.openexchange.solr.schemaInfostore	/opt/open-xchange/solr/conf/schema-infostore.xml	This is the path to the schema file for the infostore index. Don't change this unless you know what you are doing!	solr.properties:30
com.openexchange.solr.configInfostore	/opt/open-xchange/solr/conf/solrconfig-infostore.xml	This is the path to the configuration file for the infostore index. Don't change this unless you know what you are doing!	solr.properties:34
com.openexchange.solr.schemaAttachments	/opt/open-xchange/solr/conf/schema-attachments.xml	This is the path to the schema file for the attachment index. Don't change this unless you know what you are doing!	solr.properties:38
com.openexchange.solr.configAttachments	/opt/open-xchange/solr/conf/solrconfig-attachments.xml	This is the path to the configuration file for the attachment index. Don't change this unless you know what you are doing!	solr.properties:42
com.openexchange.solr.isSolrNode	false	Indicates whether this OX node is a Solr node or not. Being a Solr node means that this node will be used to perform Solr searches and jobs like indexing mailboxes etc. If set to false, all index search actions will be delegated to a Solr node.	solr.properties:6
com.openexchange.spamhandler.spamassassin.port	783	If the mail should be send to spamd specify the port of the spamassassin daemon here	spamassassin.properties:10
com.openexchange.spamhandler.spamassassin.timeout	10	If the mail should be send to spamd specify the timeout after which the try to connect is aborted here	spamassassin.properties:14
com.openexchange.spamhandler.spamassassin.retries	1	If the mail should be send to spamd specify the connect retries here.	spamassassin.properties:17
com.openexchange.spamhandler.spamassassin.spamd	false	Choose if a mail should be send to spamd afterwards	spamassassin.properties:2
com.openexchange.spamhandler.spamassassin.retrysleep	1	If the mail should be send to spamd specify the connect retries sleep here. This is how log should be waited between the different tries.	spamassassin.properties:21
com.openexchange.spamhandler.spamassassin.unsubscribeSpamFolders	true	Indicates whether the confirmed-spam/confirmed-ham folders shall automatically be unsubscribed during login. Default is true.	spamassassin.properties:25
com.openexchange.spamhandler.spamassassin.hostname	localhost	If the mail should be send to spamd specify the hostname of the spamassassin daemon here	spamassassin.properties:6
modules/com.openexchange.spamhandler.spamexperts/module	true	The following property enables the Spamexperts Iframe GUI-Plugins	spamexperts-ui.properties:9
com.openexchange.custom.spamexperts.panel.api_interface_url	http://demo1.spambrand.com/api/authticket/create/username/	URL of spamexperts Interface to generate new sessions	spamexperts.properties:11
com.openexchange.custom.spamexperts.panel.admin_user	admin	This property defines the username which should be used as basic auth	spamexperts.properties:17
com.openexchange.custom.spamexperts.panel.admin_password	demo	This property defines the password which should be used as basic auth	spamexperts.properties:23
com.openexchange.custom.spamexperts.panel.api_auth_attribute	mail	Which user attribute should be used for authentication against panel API Possible values: - imaplogin -> Users IMAP login - mail -> Users mail address - login -> String which user entered at login mask - username -> Users "username" attribute.	spamexperts.properties:33
com.openexchange.custom.spamexperts.panel.web_ui_url	http://demo1.spambrand.com/?authticket=	Defines the URL where the panel is available	spamexperts.properties:39
com.openexchange.custom.spamexperts.panel_servlet	/ajax/spamexperts/panel	The next property defines the mount point of the panel servlet	spamexperts.properties:6
com.openexchange.spamhandler.cloudmark.targetHamEmailAddress		Defines the eMail address to which the selected eMails will be bounced, if they are marked as Ham. If no address is specified the bounce will be skipped, but moving the selected mails back to the Inbox will still be processed (if configured). Privacy note: This will send private mails of users to that address when marked as Ham	spamhandler_cloudmark.properties:10
com.openexchange.spamhandler.cloudmark.targetSpamFolder	2	Defines to which folder the selected mails should be moved to after they have been bounced to the target eMail address. If no option is configured the selected mails will be moved to the users trash folder. Possible options are: 0 = Do not move the message at all 1 = User's trash folder (Default) 2 = User's SPAM folder 3 = Subscribed confirmed-spam folder (experimental)	spamhandler_cloudmark.properties:20
com.openexchange.spamhandler.cloudmark.targetSpamEmailAddress		Defines the eMail address to which the selected eMails will be bounced. If no address is specified the bounce will be skipped, but moving the selected mails to the target folder will still be processed (if configured)	spamhandler_cloudmark.properties:4
driver	com.mysql.jdbc.Driver		sql.properties:1
driver	com.mysql.jdbc.Driver		sql.properties:1
driver	com.mysql.jdbc.Driver		sql.properties:1
driver	com.mysql.jdbc.Driver		sql.properties:1
driver	com.mysql.jdbc.Driver		sql.properties:1
login	openexchange		sql.properties:2
login	openexchange		sql.properties:2
login	openexchange		sql.properties:2
login	openexchange		sql.properties:2
login	openexchange		sql.properties:2
password	secret		sql.properties:3
password	secret		sql.properties:3
password	secret		sql.properties:3
password	secret		sql.properties:3
password	secret		sql.properties:3
url	jdbc:mysql://localhost/open-xchange-db_6		sql.properties:4
url	jdbc:mysql://localhost/open-xchange-db_6		sql.properties:4
url	jdbc:mysql://devel-master.netline.de/openexchangeHEAD_14		sql.properties:4
url	jdbc:mysql://localhost/ox_test		sql.properties:4
url	jdbc:mysql://localhost/ox_test		sql.properties:4
com.openexchange.subscribe.autorun	false	Defines whether subscriptions should be run automatically on login, if a given interval has elapsed The intervals default to one day, but can be configured individually by subscription type in the subscription source specific configuration files	subscribe.properties:4
serviceUsageInspection	false	Enabled/disable service usage inspection. If enabled, all services obtained and managed by ServiceHolder class will be tracked to ensure all services are put back (via unget) within a certain amount of time. The time range can be defined through property 'serviceUsageTimeout'.	system.properties:10
serviceUsageTimeout	10000	The service usage timeout in milliseconds. This property only has effect if property 'serviceUsageInspection' is set to 'true'.	system.properties:14
MimeTypeFileName	mime.types	Name of the MIME type file	system.properties:17
UserConfigurationStorage	Caching	Name of the class implementing the UserConfigurationStorage. Currently known aliases: Caching, DB	system.properties:21
Cache	true	Switch for enabling caching in the groupware. Normally this should be set to true or the database will get a lot more load.	system.properties:25
CalendarSQL	com.openexchange.groupware.calendar.CalendarMySQL		system.properties:29
SERVER_NAME	local	Server name registered by registerserver in the configuration database can be read with listservers	system.properties:33
com.openexchange.config.cascade.scopes	user, context, contextSets, server	The scopes to use in the config cascade, and their precedence	system.properties:36
com.openexchange.caching.configfile	cache.ccf	Location of default cache configuration file	system.properties:4
com.openexchange.threadpool.maximumPoolSize	2147483647	The maximum number of threads to allow in the pool. Default is max. integer value of 2^31 - 1 which is considered as unlimited max. number of threads.	threadpool.properties:11
com.openexchange.threadpool.keepAliveTime	60000	When the number of threads is greater than the core, this is the maximum time (in milliseconds) that excess idle threads will wait for new tasks before terminating. Default is 60000msec	threadpool.properties:17
com.openexchange.threadpool.workQueue	synchronous	The queue type to use for holding tasks before they are executed. This queue will hold only the tasks submitted by the execute method. Supported values: synchronous and linked A synchronous queue is an appropriate choice when "com.openexchange.threadpool.maximumPoolSize" is unlimited and possible rejection of tasks is allowed. A synchronous queue has no capacity, it rather acts as a direct hand-off of tasks to an already waiting worker thread and will deny the task if there is no further worker thread to process the task. A linked queue is an appropriate choice when "com.openexchange.threadpool.maximumPoolSize" is limited and rejection of tasks is prohibited. A linked queue has a (fixed) capacity to store submitted tasks which have to wait for a worker thread to become ready.	threadpool.properties:29
com.openexchange.threadpool.corePoolSize	3	The number of threads to keep in the pool, even if they are idle. If unsure follow this rule: Number of CPUs + 1	threadpool.properties:3
com.openexchange.threadpool.workQueueSize	0	The size of the work queue. Zero means unlimited size. Note: If this property is set to a value greater than zero, property "com.openexchange.threadpool.workQueue" is implicitly set to "linked" to accomplish a fixed-size work queue.	threadpool.properties:34
com.openexchange.threadpool.blocking	false	Enable/disable blocking behavior. A blocking behavior means that caller is blocked until space becomes available in working queue. This is useful for installation with limited capacities concerning max. number of threads and a bounded blocking work queue.	threadpool.properties:38
com.openexchange.threadpool.refusedExecutionBehavior	abort	The default behavior to obey when execution is blocked because the thread bounds and queue capacities are reached. Supported values: abort, caller-runs, discard abort: Aborts execution by throwing an appropriate exception to the caller caller-runs: The caller is considered to run the task if thread pool is unable to do so discard: The task is silently discarded. No exception is thrown.	threadpool.properties:46
com.openexchange.threadpool.prestartAllCoreThreads	true	Starts all core threads, causing them to idly wait for work. This overrides the default policy of starting core threads only when new tasks are executed.	threadpool.properties:7
com.openexchange.tokenlogin	true	Enable or disable token-login	tokenlogin.properties:4
com.openexchange.tokenlogin.maxIdleTime	300000	Specify the maximum time (in milliseconds) a token may be idle before it is evicted Default is 300000 (5 minutes)	tokenlogin.properties:8
com.openexchange.hazelcast.configuration.map.backupCount	1	Number of backups. If 1 is set as the backup-count for example, then all entries of the map will be copied to another JVM for fail-safety. 0 means no backup.	tokenloginHz.properties:11
com.openexchange.hazelcast.configuration.map.asyncBackupCount	0	Number of nodes with async backups. Async backups do not block operations and do not require acknowledgements. 0 means no backup. Any integer between 0 and 6. Default is 0, setting bigger than 6 has no effect.	tokenloginHz.properties:16
com.openexchange.hazelcast.configuration.map.readBackupData	true	Can we read the local backup entries? Default value is false for strong consistency. Being able to read backup data will give you greater performance.	tokenloginHz.properties:21
com.openexchange.hazelcast.configuration.map.name	tokenlogin-1	The name of the map. Don't change this on your own.	tokenloginHz.properties:24
com.openexchange.hazelcast.configuration.map.maxIdleSeconds	300	Maximum number of seconds for each entry to stay idle in the map. Entries that are idle (not touched) for more than <max-idle-seconds> will get automatically evicted from the map. Entry is touched if get, put or containsKey is called. Any integer between 0 and Integer.MAX_VALUE. 0 means infinite. This value should be set equal to value of property "com.openexchange.tokenlogin.maxIdleTime" in file "tokenlogin.properties". Defaults to 300 (5 minutes).	tokenloginHz.properties:33
com.openexchange.mail.transport.enablePublishOnExceededQuota	false	Enable/disable to publish email attachments if quota is exceeded rather than throwing an appropriate error. ------- /!\ Please be aware that this option requires infostore module to be enabled! /!\ -------	transport.properties:15
com.openexchange.mail.transport.publishingPublicInfostoreFolder	i18n-defined	Specify the name of the publishing infostore folder which is created below public infostore folder. The denoted folder is created if absent only if "com.openexchange.mail.transport.enablePublishOnExceededQuota" is enabled The special identifier "i18n-defined" indicates to use translation of text "E-Mail attachments".	transport.properties:20
com.openexchange.mail.transport.publishPrimaryAccountOnly	true	Whether all accounts or only primary account are affected if property "com.openexchange.mail.transport.enablePublishOnExceededQuota" is enabled.	transport.properties:24
com.openexchange.mail.transport.sendAttachmentToExternalRecipients	false	Whether external recipients shall receive file attachments instead of publication links although quota is exceeded if property "com.openexchange.mail.transport.enablePublishOnExceededQuota" is enabled.	transport.properties:28
com.openexchange.mail.transport.provideLinksInAttachment	false	This options enables that publication links are provided in a separate "text/html" file attachment named "links.html, instead of inserting them to top of mail text. This avoids modification of original mail text. If set to "false", the publication links are inserted to top of mail text.	transport.properties:33
com.openexchange.mail.transport.publishedDocumentTimeToLive	604800000	Define the time-to-live in milliseconds for published email attachments	transport.properties:36
com.openexchange.mail.transport.referencedPartLimit	1048576	Define the limit in bytes for keeping an internal copy of a referenced MIME message's part when sending a mail. If a part exceeds this limit a temporary file is created holding part's copy	transport.properties:4
com.openexchange.mail.transport.externalRecipientsLocale	user-defined	Set the identifier of the locale to use when composing text sent to external recipients; e.g "en", or "de" The special identifier "user-defined" indicates to use that locale from the user who sends the email.	transport.properties:40
com.openexchange.mail.transport.removeMimeVersionInSubParts	false	Specify whether to strictly obey suggestion in RFC 2045 The MIME-Version header field is required at the top level of a message, but is _not_ required for each body part of a multipart entity. If set to "true", each message is processed to not contain a MIME-Version header in sub-parts Default is "false"	transport.properties:46
com.openexchange.mail.defaultTransportProvider	smtp	The transport provider fallback if an URL does not contain/define a protocol	transport.properties:7
com.openexchange.twitter.http.proxyHost		The HTTP proxy host	twitter.properties:10
com.openexchange.twitter.http.proxyPort		The HTTP proxy port	twitter.properties:13
com.openexchange.twitter.http.connectionTimeout	20000	Connection time out	twitter.properties:16
com.openexchange.twitter.http.readTimeout	120000	Read time out	twitter.properties:19
com.openexchange.twitter.http.retryCount	3	Retry count	twitter.properties:22
com.openexchange.twitter.http.retryIntervalSecs	10	Retry interval seconds	twitter.properties:25
com.openexchange.twitter.consumerKey	kZX3V4AmAWwC53yA5RjHbQ	The consumer key	twitter.properties:31
com.openexchange.twitter.consumerSecret	HvY7pVFFQSGPVu9LCoBMUhvMpS00qdtqBob99jucc	The consumer secret	twitter.properties:34
com.openexchange.twitter.clientVersion	2.2.3	The client version string	twitter.properties:4
com.openexchange.twitter.http.useSSL	false	Whether to use HTTPS or HTTP	twitter.properties:7
com.openexchange.messaging.twitter	true	Whether the twitter messaging service is available	twittermessaging.properties:2
com.openexchange.oauth.twitter	true	Enable/disable Twitter OAuth bundle	twitteroauth.properties:4
ui/global/toolbar/mode/value	tabbased	UI: Toolbar type Possible values: tabbased|simple	ui.properties:11
ui/global/toolbar/mode/configurable	true	All user to configure the latter Possible values: true|false	ui.properties:15
ui/mail/showContactImage/value	true	UI: Show contact images in email view Possible values: true|false	ui.properties:19
ui/mail/showContactImage/configurable	true	All user to configure the latter Possible values: true|false Please configure the ui.yml accordingly.	ui.properties:24
ui/mail/replyTo/configurable	false	Allow user to configure a reply-to address Possible values: true|false	ui.properties:28
ui/global/windows/mode/value	embedded	UI: Window manager Possible values: embedded and popups	ui.properties:3
ui/portal/autoRefresh	false	Auto refresh portal page Possible values: true|false Whenever the user accesses the portal, all visible widgets get refreshed (mail, calendar, contacts etc.). Default is false.	ui.properties:34
ui/portal/customUWA	true	Allow custom UWA widgets Possible values: true|false Disables add, remove, edit in UI. Default is true.	ui.properties:39
ui/global/expert/mode/configurable	true	Allow disabling of expert mode Possible values: true|false value does not affect user setting. reserved for future use.	ui.properties:44
ui/global/expert/mode/value	false		ui.properties:45
ui/global/windows/mode/configurable	true	All user to configure the latter Possible values: true|false	ui.properties:7
modules/com.openexchange.upsell.multiple.gui/module	true		upsell-multiple-gui.properties:1
modules/com.openexchange.upsell.generic/module	true		upsell.properties:10
com.openexchange.upsell.multiple.method.email.oxuser.template_subject	/opt/open-xchange/etc/groupware/upsell_mail_subject_ox_enduser.tmpl	Subject to use for emails which are sent to the ox enduser. If you need i18n support, create template with suffix "_<LANGUAGE_CODE>" Example: upsell_mail_subject_ox_enduser.tmpl_de_DE For placeholders, see above.	upsell.properties:102
com.openexchange.upsell.multiple.servlet	/ajax/upsell/multiple	The next property defines the mount point of the servlet	upsell.properties:109
com.openexchange.upsell.multiple.rmi.host	127.0.0.1	FOR TESTING, DEMO ONLY. DO NOT TOUCH IF YOU DONT KNOW WHAT THESE OPTIONS MEAN! OX API RMI Host, IF not localhost, make sure the OX accepts remote RMI connections! See AdminDaemon.properties for enabling remote connections.	upsell.properties:117
modules/com.openexchange.upsell.generic/html	<b>Groupware</b><BR><BR>This feature is currently not available in your Webmail. This and many other features can only be used with the groupware module, which is available as Upgrade or Premium option.<BR><BR>The groupware module offers many advantages on top of webmail:<BR><ul><li>Team work capabilities with shared, personal and global calendars and address books.</li><li>Save your files on-line and grant team members or others specific access permissions to your data.</li><li>Synchronize E-Mails as well as appointments, tasks, and contacts with MS Outlook or your Mac by using the Open-Xchange Outlook or Mac Connector.</li><li>Use your mobile device for push synchronization of your E-Mails, appointments, tasks, and contacts and you are always up-to-date, even on the road.</li></ul><BR><b>Mobility</b><BR><BR>This feature is currently not available in your Webmail. Synchronization with your mobile phone can only be used with the mobility module, which is available as Upgrade or Premium option.<BR><BR>The mobility module offers many advantages on top of Webmail:<ul><li>Push E-Mail, get your E-Mails instantly on your mobile device.</li><li>Push synchronization of your appointments, contacts, and tasks.</li><li>Accept/Decline for appointments on your mobile device.</li></ul>		upsell.properties:12
com.openexchange.upsell.multiple.rmi.masteradmin	oxadminmaster	OX API RMI Masteradmin	upsell.properties:122
com.openexchange.upsell.multiple.rmi.masteradmin.pass	secret	OX API RMI Masteradmin Password	upsell.properties:127
com.openexchange.upsell.multiple.rmi.downgrade.accessname	pim	Which access-combination-name should be used for downgrading the context	upsell.properties:132
com.openexchange.upsell.multiple.method.external.shop_api_url	http://shop.host.com/api/generateshopurl	DISABLED AT THE MOMENT! URL of the external Interface to generate "upsell URL" for customers shop or control center URL will be used in a POST request with following parameters of the logged in ox user: src = "ox_upsell" user = <ox_username> userid = <ox_user_id> pwd = <ox_user_password> cid = <ox_user_cid> mail = <ox_user_mail> login = <ox_user_full_login_from_login_mask> imaplogin = <ox_user_imap_login> clicked_feat = <clicked_feature_at_gui> upsell_plan = <clicked_upsell_plan>	upsell.properties:151
com.openexchange.upsell.multiple.method	static	Define which Upsell method should be used Possible values: a) direct b) static, c) email direct = Redirect within IFRAME immediately to com.openexchange.upsell.multiple.method.static.shop_redir_url value after clicking one of the upsell triggers static = Redirect AFTER clicking a button within the shipped OX Upsell pages email = Send email to specific address AFTER clicking a button within the shipped OX Upsell pages	upsell.properties:33
com.openexchange.upsell.multiple.method.static.shop_redir_url	http://shop.host.tld/?shop=true&src=ox&user=_USER_&userid=_USERID_&mail=_MAIL_&login=_LOGIN_&imaplogin=_IMAPLOGIN_&clicked_feat=_CLICKED_FEATURE_&lang=_LANG_&cid=_CID_	b) Defines the static URL to redirect with all parameters we can pass , see below for all possible parameters	upsell.properties:39
com.openexchange.upsell.multiple.method.email.address	upsell@shop.host.tld	c) Defines the email address where upsell will send all infos to for processing this request	upsell.properties:45
com.openexchange.upsell.multiple.method.email.template	/opt/open-xchange/etc/groupware/upsell_mail_body.tmpl	Email template to load, if not found, hardcoded text will be used. Following placeholders will be replaced by ox users data: "_USER_" "_USERID_" "_MAIL_" "_LOGIN_" "_IMAPLOGIN" "_CLICKED_FEATURE_" "_UPSELL_PLAN_" - Not in use. "_CID_" "_LANG_" "_PURCHASE_TYPE_" - Only used if email or static method is used due to the OX upsell layout/buttons "_INVITE_" - User checked "invite my friends" checkbox in upsell box	upsell.properties:63
com.openexchange.upsell.multiple.method.email.subject	OX upsell in context _CID_ for user _USERID_ (_USER_) with email _MAIL_ was requested by clicking _CLICKED_FEATURE_	Mail subject to use when sending upsell request mails. See available placeholders in option above	upsell.properties:68
com.openexchange.upsell.multiple.method.email.oxuser.enabled	true	Send info email to ox enduser to inform about upsell?	upsell.properties:74
com.openexchange.upsell.multiple.method.email.oxuser.template	/opt/open-xchange/etc/groupware/upsell_mail_body_ox_enduser.tmpl	Following placeholders can be replaced by ox users data: "_USER_" "_USERID_" "_MAIL_" "_LOGIN_" "_IMAPLOGIN" "_CLICKED_FEATURE_" "_UPSELL_PLAN_" - Not in use. "_CID_" "_LANG_" "_PURCHASE_TYPE_" - Only used if email or static method is used due to the OX upsell layout/buttons	upsell.properties:94
com.openexchange.user.contactCollectOnMailAccess	false	Define the default behavior whether to collect contacts on mail access Note: Appropriate user access permission still needs to be granted in order to take effect	user.properties:11
com.openexchange.user.contactCollectOnMailTransport	false	Define the default behavior whether to collect contacts on mail transport Note: Appropriate user access permission still needs to be granted in order to take effect	user.properties:15
com.openexchange.user.maxClientCount	-1	Specify the max. allowed number of client identifiers stored/tracked per user A value equal to or less than zero means unlimited Default is -1	user.properties:20
com.openexchange.user.beta	true	Specify whether beta features are enabled/disabled per default. The value is remembered for every user in its attributes.	user.properties:4
com.openexchange.folder.tree	1	Defines the default folder tree that should be used if a user has not selected one.	user.properties:7
com.4psa.voipnow.faxaddress	fax@voip.open-xchange.com	Fax address.	voipnow.properties:10
com.4psa.voipnow.host	my.voipnowserver.net	The VoipNow host; either the machine name, such as "my.voipnowserver.net", or a textual representation of its IP address.	voipnow.properties:13
com.4psa.voipnow.port	443	The VoipNow port.	voipnow.properties:16
com.4psa.voipnow.secure	true	Whether a secure connection (HTTPS) shall be established. A secure connection is recommended.	voipnow.properties:19
com.4psa.voipnow.adminLogin	admin	The login name of the VoipNow administrator account	voipnow.properties:22
com.4psa.voipnow.adminPassword	secret	The password of the VoipNow administrator account for used for SOAP requests (and for login via web front-end)	voipnow.properties:25
com.4psa.voipnow.adminPasswordHTTP	secret	The password of the VoipNow administrator account for used for HTTP API request	voipnow.properties:28
com.4psa.voipnow.enabled	true	Enable/disable.	voipnow.properties:4
com.4psa.voipnow.version	2.0.4	The version string.	voipnow.properties:7
com.openexchange.oauth.xing.apiSecret	REPLACE_THIS_WITH_YOUR_XING_PRODUCTIVE_SECRET	The API secret	xingoauth.properties:10
com.openexchange.oauth.xing.domain		The domain to use when composing call-back URL Leave empty to use host address as default	xingoauth.properties:14
com.openexchange.oauth.xing	false	Enable/disable	xingoauth.properties:4
com.openexchange.oauth.xing.apiKey	REPLACE_THIS_WITH_YOUR_XING_PRODUCTIVE_KEY	The API key	xingoauth.properties:7
com.openexchange.subscribe.socialplugin.xing	true	Enable/disable XING subscribe service	xingsubscribe.properties:4
com.openexchange.oauth.yahoo	false	Enable/disable Yahoo OAuth support	yahoooauth.properties:2
com.openexchange.oauth.yahoo.apiKey	REPLACE_THIS_WITH_VALUE_OBTAINED_FROM_YAHOO		yahoooauth.properties:4
com.openexchange.oauth.yahoo.apiSecret	REPLACE_THIS_WITH_VALUE_OBTAINED_FROM_YAHOO		yahoooauth.properties:5
com.openexchange.subscribe.socialplugin.yahoo	true		yahoosubscribe.properties:1
com.openexchange.subscribe.socialplugin.yahoo.autorunInterval	1d		yahoosubscribe.properties:2