Open-Xchange cPanel Installation: Difference between revisions
No edit summary |
No edit summary |
||
Line 239: | Line 239: | ||
'''Starting with version 1.0.0 Rev2''' it is possible to run multiple WHM/cPanel instances with a single Open-Xchange (cluster) installation. This, however, requires some extra management which is not part of the <tt>open-xchange-cpanel</tt> package nor is there any other ready to use ui for that. | '''Starting with version 1.0.0 Rev2''' it is possible to run multiple WHM/cPanel instances with a single Open-Xchange (cluster) installation. This, however, requires some extra management which is not part of the <tt>open-xchange-cpanel</tt> package nor is there any other ready to use ui for that. | ||
The setup of the cPanel server and Connector is the same as described in the [[Open-Xchange_cPanel_Installation#Install_and_prepare_WHM. | The setup of the cPanel server and Connector is the same as described in the [[Open-Xchange_cPanel_Installation#Install_and_prepare_WHM.2FcPanel_on_CentOS|installation section]]. | ||
The same applies to the installation of the Open-Xchange server. Once the Open-Xchange server is installed, however, you need to create a subadmin account per WHM/cPanel server. These subadmins must be able to create further subadmin accounts (one per cPanel account). | The same applies to the installation of the Open-Xchange server. Once the Open-Xchange server is installed, however, you need to create a subadmin account per WHM/cPanel server. These subadmins must be able to create further subadmin accounts (one per cPanel account). | ||
Revision as of 11:04, 26 August 2013
Install Open-Xchange on WHM/cPanel
Requirements
Connector for cPanel requires to have WHM versions from 11.32 to 11.38 installed running on RHEL 5,6 or CentOS 5,6. It supports Open-Xchange versions 6.20 and newer. This guide, however, describes how to setup Open-Xchange Server 6.22 and above.
Important: Do not update to newer versions of cPanel then mentioned here. You might want to turn autoupdates of in setting
UPDATES=manual
in /etc/cpupdate.conf
Changelog
1.1.0-rev4
- Fixed Addon Domain handling (login to Open-Xchange was not working for email accounts in Addon Domains)
1.1.0-rev3
- Support for CentOS6/RHEL6
- Support for OX App Suite
Mode of operation
It is recommended to run Open-Xchange on one or more separate machines. See the "Hosting Edition deployment tutorials" at
- Open-Xchange Server 6
- Main_Page_HESE#quickinstall.
- OX App Suite
- AppSuite:Main_Page_AppSuite#quickinstall
The connection between cPanel and Open-Xchange is done via some cPanel/WHM hooks and UI plugins using SOAP as communication channel. That means that SOAP must be enabled on Open-Xchange.
Once the package open-xchange-cpanel is installed on the cPanel/WHM system, every cPanel user created within WHM will be created as an admin account and context in Open-Xchange. In addition, there's a single program to create all existing cPanel Accounts in Open-Xchange.
Availability
Connector for cPanel is available with a valid Open-Xchange Hosting Edition license. To get pricing information that meets your individual requirements, please contact Open-Xchange
Known issues
- If you have existing cpanel plugins that use /script hooks (or /usr/local/cpanel/script), as well as /usr/local/cpanel/hooks, take care to make a backup of these files because they will be replaced by the open-xchange-cpanel rpm
- Users with the same email localpart from different domains in a single cPanel account and a single context do not work because user names as well as display names must be unique
- cPanel account names cannot be renamed when using the ox integration
- Error handling needs to be improved.
- Add-on domain handling needs to be improved
- Unable to indicate errors in open-xchange account creation when adding users in WHM/cPanel because the WHM/cPanel hooks have no possibility
- transferring cpanel users from one cpanel server to another is not supported
Release Notes
To download the Release Notes, follow this: Download
Install and prepare Open-Xchange
Follow one of the Open-Xchange installation guides to install Open-Xchange and either just install the packages
On OX6 with backend versions < 7.2.2:
open-xchange-meta-cpanel
On OX6 with backend versions >= 7.2.2:
open-xchange-meta-cpanel open-xchange-meta-backend-ox6 open-xchange-meta-ui-ox6
On OX App Suite version >= 7.2.2 (older versions not supported):
open-xchange-meta-cpanel open-xchange-meta-backend-appsuite open-xchange-meta-ui-appsuite
or take care of the following exceptions:
- Do not install the package open-xchange-mailfilter. cPanel does not support SIEVE at the moment.
- Install the package open-xchange-admin-soap-reseller
- Instead of open-xchange-authentication-database, install the package open-xchange-authentication-imap
Important:
- Do NOT create a context, just follow the installation guide up to the database registration
- Add the following argument to initconfigdb: --addon-sql "reseller.sql autocid.sql"
Preparation
- run the command
$ /opt/open-xchange/sbin/initrestrictions -A oxadminmaster -P secret
once you've finished the open-xchange installation
- On OX6 take care to install the packages open-xchange-gui-wizard-plugin open-xchange-gui-wizard-plugin-gui. The wizard must be used to enforce the user to provide a real valid displayname.
- On OX6 edit file /opt/open-xchange/etc/settings/open-xchange-gui-wizard-plugin.properties and set
ui/wizard/firstrunmode=true
- edit file /opt/open-xchange/etc/imapauth.properties and set
USE_MULTIPLE=true
- edit file /opt/open-xchange/etc/mail.properties and set
com.openexchange.mail.adminMailLoginEnabled=true
- edit file /opt/open-xchange/etc/sessiond.properties and set
com.openexchange.sessiond.autologin=true
- edit file /opt/open-xchange/etc/AdminUser.properties and set
PRIMARY_MAIL_UNCHANGEABLE=false
- allow access from the cPanel server, edit /etc/httpd/conf.d/proxy_ajp.conf
<Location /servlet/axis2/services> # restrict access to the soap provisioning API Order Deny,Allow Deny from all Allow from 127.0.0.1 Allow from <your cpanel server ip> # you might add more ip addresses / networks here # Allow from 192.168 10 172.16 </Location> [...]
Install and prepare WHM/cPanel on CentOS
Note: Choose either CentOS5,6 or RHEL5,6. Nothing else is supported to integrate Open-Xchange with cPanel.
Important: If you have existing cpanel plugins that use /script hooks (or /usr/local/cpanel/script), as well as /usr/local/cpanel/hooks, take care to make a backup of these files because they will be replaced by the open-xchange-cpanel rpm
- Follow the installation guide http://docs.cpanel.net/twiki/bin/view/AllDocumentation/InstallationGuide/Quick-StartInstallationGuide
- run /scripts/upcp
- run /scripts/perlinstaller SOAP::Lite
NOTE: This can take very long and it might look like it is hanging at
We are about to install SOAP::Lite and for your convenience will provide you with list of modules and prerequisites, so you'll be able to choose only modules you need for your configuration. XMLRPC::Lite, UDDI::Lite, and XML::Parser::Lite are included by default. Installed transports can be used for both SOAP::Lite and XMLRPC::Lite. Press <enter> to see the detailed list.
Just be patient and wait for it to finish.
- add the repository http://software.open-xchange.com/OX6/OXtender-stable/cPanel/RHEL5 to your yum configuration
VERY IMPORTANT: Due to the inability of yum to correctly handle the x86_64 architecture, it is important to add the line
exclude=*.i386
to your yum repo configuration (see below). Check http://wiki.centos.org/FAQ/General#head-357346ff0bf7c14b0849c3bcce39677aaca528e9 for details.
yum repo config on i386
$ vi /etc/yum.repos.d/oxintegration.repo [oxcpintegration] name=Open-Xchange cPanel baseurl=http://LDBACCOUNT:LDBPASSWORD@software.open-xchange.com/components/cPanel/stable/RHEL6 gpgkey=http://software.open-xchange.com/oxbuildkey.pub enabled=1 gpgcheck=1 metadata_expire=0m
yum repo config on x86_64
$ vi /etc/yum.repos.d/oxintegration.repo [oxcpintegration] name=Open-Xchange cPanel baseurl=http://LDBACCOUNT:LDBPASSWORD@software.open-xchange.com/components/cPanel/stable/RHEL6 gpgkey=http://software.open-xchange.com/oxbuildkey.pub enabled=1 gpgcheck=1 metadata_expire=0m #IMPORTANT!!!!! exclude=*.i386
- install the package open-xchange-cpanel
$ yum install open-xchange-cpanel
- run the installer (-h for help):
$ /usr/local/cpanel/bin/oxcpanelinstall --oxurl http://ox.example.com --oxadmin-password oxadminmasterpassword
Now your Open-Xchange server is integrated with your cPanel installation.
To check the connection, run
$ /usr/local/cpanel/bin/oxcpanelenable -c
This program can also be used to enable all existing cPanel users in OX. Run
$ /usr/local/cpanel/bin/oxcpanelenable -h
for more information.
Create all cPanel Accounts in Open-Xchange
Like mentioned before, you must now create accounts in Open-Xchange for all your existing cPanel accounts. This will not happen automatically. New accounts created in WHM, however, will automatically created in Open-Xchange.
To create an ox account per cPanel account you can either run
$ /usr/local/cpanel/bin/oxcpanelenable -e
or in the Open-Xchange WHM plugin click on every single cPanel Account and enable it.
Debugging
- run the command
$ sudo /usr/local/cpanel/bin/oxcpanelenable -c
to check Open-Xchange connection before doing anything else. It must output connection check successfull
- All errors happening during cPanel account creation and mail account creation are logged into the files /usr/local/cpanel/logs/open-xchange_log and /usr/local/cpanel/logs/error_log. If something does not work, check these logs first!
- /usr/local/cpanel/bin/oxcpanelinstall creates a debug output file with every execution, check its output, e.g.:
$ /usr/local/cpanel/bin/oxcpanelinstall --oxurl http://myox.example.com --oxadmin-password secret running installer, please wait. Debugoutput is placed into file /tmp/cpoxinst3542.out
- do NOT disable authentication in /opt/open-xchange/etc/AdminDaemon.properties because this will mess up authentication using the Connector for cPanel, see Reseller_Bundle#Setup_and_Configuration for more information.
WHM OX Plugin Usage
To create Open-Xchange accounts, nothing else is required than to create cPanel accounts as usual. Due to the design of the WHM plugin mechanism, however, it is not possible to indicate any errors that might happen when creating the account in Open-Xchange fails.
You can easily check, however, if the Open-Xchange account creation failed when you open the Open-Xchange plugin which can be found in the left menu in WHM almost on the bottom.
Failed attempts to create an ox accounts can be seen there because in that case, the account is not enabled. In such a case you need to Terminate that account and create it again after you fixed the reason for the failed attempt. Check the logs for errors.
In addition you will find all relevant error messages in /usr/local/cpanel/logs/open-xchange_log and /usr/local/cpanel/logs/error_log.
cPanel OX Plugin Usage
To create email accounts in Open-Xchange, nothing else is required than to create email accounts in cPanel. Due to the design of the cPanel plugin mechanism, however, it is not possible to indicate any errors that might happen when creating the account in Open-Xchange fails.
To check whether the email account creation fails, just open the Open-Xchange plugin and check if the recently created email account(s) appear in the list. If not, contact your hosting provider or, if you are the owner of the machine, you will find all relevant error messages in /usr/local/cpanel/logs/open-xchange_log and /usr/local/cpanel/logs/error_log.
Running multiple WHM/cPanel instances with a single Open-Xchange instance (cluster)
Starting with version 1.0.0 Rev2 it is possible to run multiple WHM/cPanel instances with a single Open-Xchange (cluster) installation. This, however, requires some extra management which is not part of the open-xchange-cpanel package nor is there any other ready to use ui for that.
The setup of the cPanel server and Connector is the same as described in the installation section. The same applies to the installation of the Open-Xchange server. Once the Open-Xchange server is installed, however, you need to create a subadmin account per WHM/cPanel server. These subadmins must be able to create further subadmin accounts (one per cPanel account).
$ /opt/open-xchange/sbin/createadmin -A oxadminmaster -P secret -u cpanelmaster1 -d "cPanel Superadmin 1" -p secret -a Subadmin.CanCreateSubadmin=true
$ /opt/open-xchange/sbin/createadmin -A oxadminmaster -P secret -u cpanelmaster2 -d "cPanel Superadmin 2" -p secret -a Subadmin.CanCreateSubadmin=true
and so on. You can also restrict the maximum number of subadmins a subadmin can create, see Reseller Bundle description for further details.
$ /opt/open-xchange/sbin/listadmin -A oxadminmaster -P secret Id Name Displayname Parent Restrictions 96 cpanelmaster1 cPanel Superadmin 1 0 Subadmin.CanCreateSubadmin=true 97 cpanelmaster2 cPanel Superadmin 2 0 Subadmin.CanCreateSubadmin=true
Now on each WHM/cPanel installation, instead of using the oxadminmaster account when running the oxcpanelinstaller, specify the corresponding cpanel supadmin, e.g.
$ /usr/local/cpanel/bin/oxcpanelinstall --oxurl http://ox.example.com --oxadmin-name cpanelmaster1 --oxadmin-password secret
and so on.