Template:DoveadmHTTPapi: Difference between revisions
Oskarikentta (talk | contribs) |
Oskarikentta (talk | contribs) |
||
Line 2,702: | Line 2,702: | ||
=== doveadm fs iter-dirs === | === doveadm fs iter-dirs === | ||
ist subfolders in given path | |||
parameters: | parameters: | ||
Line 2,739: | Line 2,740: | ||
|fsDriver | |fsDriver | ||
|String | |String | ||
|filesystem | |filesystem driver to use | ||
| | | | ||
|- | |- | ||
Line 2,750: | Line 2,751: | ||
|String | |String | ||
|path in filesystem to list for subfolders | |path in filesystem to list for subfolders | ||
| | |||
|} | |} | ||
Revision as of 10:41, 14 March 2017
Table of Contents
doveadm http api
configuration
To be able to use doveadm http api it’s mandatory to configure either password for doveadm or a api key.
To configure password for doveadm service in /etc/dovecot/dovecot.conf:
doveadm_password = hellodoveadm
Or if preferred to use separate key for doveadm http api then it can be enabled by defining key in config:
doveadm_api_key = key
And to enable the doveadm http listener:
service doveadm { unix_listener doveadm-server { user = vmail } inet_listener { port = 2425 } inet_listener http { port = 8080 #ssl = yes # uncomment to enable https } }
usage
connecting to endpoint can then be done by using standard http protocol and authentication headers. To get list the commands supported by the endpoint, the following example commands can be used:
X-Dovecot-API auth usage:
curl -H "Authorization: X-Dovecot-API <base64 dovecot_api_key>" http://host:port/doveadm/v1
Basic auth usage:
curl -H "Authorization: Basic <base64 doveadm:doveadm_password>" http://host:port/doveadm/v1
or by letting curl to form the base64 encoded authentication basig authentication header:
curl –u doveadm:password http://host:port/doveadm/v1
command usage
All commands sent to the API needs to be posted in json format using “Content-Type: application/json” in headers for the request type and the json content as payload in format:
[ [ "command1", { "parameter1": "value", "parameter2": "value", "parameter3": "value" }, "identifier" ] ]
Multiple commands can be submitted in one json payload:
[ [ "command1", { "parameter1": "value", "parameter2": "value" }, "identifier1" ], [ "command2", { "parameter1": "value", "parameter2": "value" }, "identifier2" ] ]
For now it is safest not to send multiple commands in one json payload, as some commands may kill the server in certain error conditions and leaving you without any response. Also it is not guaranteed that the commands will be processed in order.
All commands are case sensitive.
example usage
In the example we ask dovecot to reload configuration:
son payload: [ [ "reload", {}, "a2" ] ]
submitting the command with curl:
# curl -v -u doveadm:hellodoveadm -X POST http://localhost:8080/doveadm/v1 -H "Content-Type: application/json" -d '[["reload",{},"a2"]]'
command line equivalent
doveadm reload
successful response
[ [ "doveadmResponse", [], "a2" ] ]
failure response
[ [ "error", { "exitCode": 68, "type": "exitCode" }, "a2" ]
failure codes
2 | Success but mailbox changed during operation |
64 | Invalid parameters |
65 | Data error |
67 | User does not exist |
68 | User does not have session |
73 | User out of quota |
75 | Temporary error |
77 | No permission |
78 | valid configuration |
Supported commands
doveadm service
doveadm service stop
stop one or more dovecot services on target host
{ "command": "serviceStop", "parameters": [ { "name": "service", "type": "array" } ] }
parameters:
Parameter | Type | Description | example |
---|---|---|---|
service | string array | Name of service to stop | [“imap”,”imap-hibernate”] |
example:
[ [ "serviceStop", { "service": [ "imap", "imap-hibernate" ] }, "aa" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["serviceStop",{"service":["imap","imap-hibernate"]},"aa"]]' http://localhost:8080/doveadm/v1 CLI: doveadm service stop imap imap-hibernate
doveadm stop
stop dovecot on the target host
{ "command": "stop", "parameters": [] } no parameters
example:
[ [ "stop", {}, "a1" ] ] # curl -u doveadm:hellodoveadm -X POST http://localhost:8080/doveadm/v1 -H "Content-Type: application/json" -d '[["stop",{},"a1"]]' CLI: doveadm stop
doveadm reload
reload dovecot configuration
{ "command": "reload", "parameters": [] }
example:
[ [ "reload", {}, "a2" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["reload",{},"aa"]]' http://localhost:8080/doveadm/v1 CLI: doveadm reload
doveadm stats
doveadm stats dump
dump collected dovecot statistics
{ "command": "statsDump", "parameters": [ { "name": "socketPath", "type": "string" }, { "name": "type", "type": "string" }, { "name": "filter", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/dovearm-server |
type | String | Type of stats to dump | global |
filter | String | Dump filter | last_update 1483101542 |
Example:
[ [ "statsDump", { "type": "global" }, "aa" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["statsDump",{"type":"global"},"aa"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [ { "auth_cache_hits": "0", "auth_cache_misses": "0", "auth_db_tempfails": "0", "auth_failures": "0", "auth_master_successes": "0", "auth_successes": "0", "clock_time": "0.0", "disk_input": "0", "disk_output": "0", "fscache_read": "0", "fscache_stat": "0", "fscache_write": "0", "idx_del": "0", "idx_iter": "0", "idx_read": "0", "idx_read_usecs": "0", "idx_wbytes": "0", "idx_write": "0", "idx_write_usecs": "0", "invol_cs": "0", "last_update": "0.000000", "mail_cache_hits": "0", "mail_lookup_attr": "0", "mail_lookup_path": "0", "mail_read_bytes": "0", "mail_read_count": "0", "maj_faults": "0", "min_faults": "0", "num_cmds": "0", "num_connected_sessions": "0", "num_logins": "0", "obox_copy": "0", "obox_del": "0", "obox_iter": "0", "obox_read": "0", "obox_read_usecs": "0", "obox_stat": "0", "obox_wbytes": "0", "obox_write": "0", "obox_write_usecs": "0", "read_bytes": "0", "read_count": "0", "reset_timestamp": "1483104199", "sys_cpu": "0.0", "user_cpu": "0.0", "vol_cs": "0", "write_bytes": "0", "write_count": "0" } ], "aa" ] ] CLI: doveadm stats dump global
doveadm stats reset
reset dovecot statistics counters
{ "command": "statsReset", "parameters": [ { "name": "socketPath", "type": "string" } ] }
parameters:
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
example:
[ [ "statsReset", {}, "aa" ] ] curl -v -u doveadm:hellodoveadm -X POST http://localhost:8080/doveadm/v1 -H "Content-Type: application/json" -d '[["statsReset",{},"aa"]]' http://localhost:8080/doveadm/v1 CLI: doveadm stats reset
doveadm penalty
show current penalties { "command": "penalty", "parameters": [ { "name": "socketPath", "type": "string" }, { "name": "netmask", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | string | Path to doveadm socket | /var/run/dovecot-server |
netmask | string | To reduce/filter the output supply an IP address or a network range in CIDR notation (ip/mask) | 10.0.0.0/24 |
example:
[ [ "penalty", {}, "aa" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["penalty",{},"aa"]]' http://localhost:8080/doveadm/v1 CLI: doveadm penalty
doveadm kick
Kick user from dovecot. Applicable to session in dovecot backend only
{ "command": "kick", "parameters": [ { "name": "socketPath", "type": "string" }, { "name": "force", "type": "boolean" }, { "name": "mask", "type": "array" } ] }
parameters:
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/roveam-server |
force | Boolean | Do a forced kick? | 0 |
mask | String | Uid mask | testuser001 |
example:
[ [ "kick", { "force": 0, "mask": "testuser001" }, "aa" ] ] # curl -v -u doveadm:hellodoveadm –H “Content-Type: application/json" -d '[["kick", {"mask":"testuser001"}, "aa"]]' http://localhost:8080/doveadm/v1 CLI: doveadm kick testuser001
response for succesfull kick:
[ [ "doveadmResponse", [ { "result": "testuser001" } ], "aa" ] ]
response in case kick failed:
[ [ "error", { "exitCode": 68, "type": "exitCode" }, "aa" ] ]
doveadm who
list active dovecot sessions { "command": "who", "parameters": [ { "name": "socketPath", "type": "string" }, { "name": "separateConnections", "type": "boolean" }, { "name": "mask", "type": "array" } ] }
parameters
Parameter | Type | Description | example |
---|---|---|---|
socketPath | string | Path to doveadm socket | /var/run/dovecot/doveadm-server |
separateConnections | Boolean | Show each user connection in separate entries | 0 |
mask | string array | Uid mask | testuser001 |
Example:
[ [ "who", { "mask": "", "separateConnections": 0, "socketPath": "" }, "aa" ] ] # curl -v -u doveadm:hellodoveadm -X POST http://localhost:ype: application/json" -d '[["who", {}, "aa"]]' http://localhost:8080/doveadm/v1 CLI: doveadm who
response:
[ [ "doveadmResponse", [ { "connections": "1", "ips": "(127.0.0.1)", "pids": "(4999)", "service": "imap", "username": "testuser001" } ], "aa" ] ]
doveadm director
doveadm director status
Show backend statuses on directors. Available only in directors
[ { "command": "directorStatus", "parameters": [ { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "tag", "type": "string" } ] } ]
parameters:
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
user | String | Show hashed status for individual user | testuser001 |
tag | String | Show director status for Tagged hosts only | NewBackend |
example:
[ [ "directorStatus", {}, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["directorStatus",{},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [ { "mail server ip": "10.0.0.234", "state": "up", "state-changed": "2016-12-15 08:31:37", "tag": "", "users": "1", "vhosts": "100" }, { "mail server ip": "10.0.0.235", "state": "up", "state-changed": "2016-12-15 08:31:04", "tag": "", "users": "0", "vhosts": "100" } ], "bb" ] ] CLI: doveadm director status
doveadm director map
list current user → host mappings. Applicable to director only
"command": "directorMap", "parameters": [ { "name": "socketPath", "type": "string" }, { "name": "usersFile", "type": "string" }, { "name": "hashMap", "type": "boolean" }, { "name": "userMap", "type": "boolean" }, { "name": "host", "type": "string" } ] }
parameters
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
usersFile | String | provide Path to users list. One username per line | /etc/dovecot/userlist.txt |
hashMap | Boolean | Output users as hashmap | True |
userMap | Boolean | Output users as userlist | True |
host | String | Show only mappings to given host | 10.0.0.234 |
example:
[ [ "directorMap", {}, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["directorMap",{},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [ { "expire time": "2016-12-30 14:52:56", "hash": "3853430566", "mail server ip": "10.0.0.235", "user": "samik" } ], "bb" ] ] CLI: doveadm director map
doveadm director add
add backend to director ring
{ "command": "directorAdd", "parameters": [ { "name": "socketPath", "type": "string" }, { "name": "tag", "type": "string" }, { "name": "host", "type": "string" }, { "name": "vhostCount", "type": "string" } ] }
parameters:
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
tag | String | apply tag to backend | /etc/dovecot/userlist.txt |
host | String | backend ip to add | 10.0.0.234 |
vhostCount | String | vhost count to add | 100 |
Example:
[ [ "directorAdd", { "host": "10.0.234" }, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["directorAdd",{"host":"10.0.234"},"bb"]]' http://localhost:8080/doveadm/v1 CLI: doveadm director add 10.0.0.234
doveadm director update
{ "command": "directorUpdate", "parameters": [ { "name": "socketPath", "type": "string" }, { "name": "host", "type": "string" }, { "name": "vhostCount", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
user | String | Show hashed status for individual user | testuser001 |
tag | string | Show director status for tagged hosts only | NewBackend |
doveadm director up
{ "command": "directorUp", "parameters": [ { "name": "socketPath", "type": "string" }, { "name": "host", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
user | String | Show hashed status for individual user | testuser001 |
tag | string | Show director status for tagged hosts only | NewBackend |
doveadm director down
{ "command": "directorDown", "parameters": [ { "name": "socketPath", "type": "string" }, { "name": "host", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
user | String | Show hashed status for individual user | testuser001 |
tag | string | Show director status for tagged hosts only | NewBackend |
doveadm director remove
remove backend from director ring
{ "command": "directorRemove", "parameters": [ { "name": "socketPath", "type": "string" }, { "name": "host", "type": "string" } ] }
parameters:
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
host | String | backend to remove | 10.0.0.134 |
example:
[ [ "directorRemove", { "host": "10.0.0.234" }, "aa" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["directorRemove",{"host":"10.0.0.234"},"aa"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [], "aa" ] ] CLI: doveadm director remove 10.0.0.234
doveadm director move
move user mapping from backend to another or create director mapping for an user
{ "command": "directorMove", "parameters": [ { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "host", "type": "string" } ] }
parameters:
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/director-admin |
user | String | target backend ip as listed in doveadm director status | testuser001 |
host | string | Target backend ip as listed in doveadm doveadm director status | 10.0.0.234 |
example:
[ [ "directorMove", { "host": "10.0.234", "user": "samik" }, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["directorMove",{"user":"samik","host":"10.0.234"},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [], "bb" ] ] CLI: doveadm director move samik 10.0.0.234
doveadm director kick
{ "command": "directorKick", "parameters": [ { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" } ] }
parameters:
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/director-admin |
user | String | uid of user to kick | samik |
example:
[ [ "directorKick", { "user": "samik" }, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["directorKick",{"user":"samik"},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [], "bb" ] ] CLI: doveadm director kick samik
doveadm director flush
flush connection mappings to one backend at director level. All users mapped to given host will be flushed from the hashmap table and will be redistributed to backends.
Parameters:
{ "command": "directorFlush", "parameters": [ { "name": "socketPath", "type": "string" }, { "name": "forceFlush", "type": "boolean" }, { "name": "host", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/director-admin |
forceFlush | Boolean | Flag to make flush forced | True |
host | String | Backend ip address from doveadm director status list | 10.0.0.234 |
example:
[ [ "directorFlush", { "host": "10.0.0.234" }, "aa" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["directorFlush",{"host":"10.0.0.234"},"aa"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [], "aa" ] ] CLI: doveadm director flush 10.0.234
doveadm director dump
Dumb the current director backend host configuration as commands
{ "command": "directorDump", "parameters": [ { "name": "socketPath", "type": "string" } ] }
parameters:
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/director-admin |
example:
[ [ "directorDump", {}, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["directorDump",{},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [ { "command": "add", "host": "10.0.0.234", "socket-path": "/var/run/dovecot/director-admin", "vhost_count": "100" }, { "command": "add", "host": "10.0.0.235", "socket-path": "/var/run/dovecot/director-admin", "vhost_count": "100" } ], "bb" ] ] CLI: doveadm director dump
doveadm director ring add
add new director to director ring
parameters:
{ "command": "directorRingAdd", "parameters": [ { "name": "socketPath", "type": "string" }, { "name": "ip", "type": "string" }, { "name": "port", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/director-admin |
ip | String | director ip address to add | 10.0.0.233 |
port | String | port number to use if not default | 9143 |
example:
[ [ "directorRingAdd", { "ip": "10.0.0.233" }, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["directorRingAdd",{"ip":"10.0.0.233"},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [], "bb" ] ] CLI: doveadm director ring add 10.0.0.233
doveadm director ring remove
remove director from director ring
parameters:
{ "command": "directorRingRemove", "parameters": [ { "name": "socketPath", "type": "string" }, { "name": "ip", "type": "string" }, { "name": "port", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/director-admin |
ip | String | director ip to remove | 10.0.0.233 |
port | String | director service port if not default | 9143 |
example:
[ [ "directorRingRemove", { "ip": "10.0.0.233" }, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["directorRingRemove",{"ip":"10.0.0.233"},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [], "bb" ] ] CLI: doveadm director ring remove 10.0.0.233
doveadm director ring status
show director ring status
parameters:
{ "command": "directorRingStatus", "parameters": [ { "name": "socketPath", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/director-admin |
example:
[ [ "directorRingStatus", {}, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["directorRingStatus",{},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ "doveadmResponse", [ { "director ip": "10.0.0.232", "last failed": "never", "port": "9143", "status": "synced", "type": "self" }, { "director ip": "10.0.0.233", "last failed": "never", "port": "9143", "status": "", "type": "" } ], "bb" ] ] CLI: doveadm director ring status
doveadm proxy
The doveadm proxy commands are used to list or kick active Dovecot proxy connections.
doveadm proxy list
list active connections in the dovecot proxy
parameters:
{ "command": "proxyList", "parameters": [ { "name": "socketPath", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
example:
[ [ "proxyList", {}, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["proxyList",{},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [ { "dest-ip": "127.0.0.1", "dest-port": "1143", "service": "imap", "src-ip": "10.0.0.153", "username": "samik" } ], "bb" ] ] CLI: doveadm proxy list
doveadm proxy kick
kick user session from proxy. applicable to imap/pop3/managesieve sessions
parameters:
{ "command": "proxyKick", "parameters": [ { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
user | String | userid to kick | samik |
example:
[ [ "proxyKick", { "user": "samik" }, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["proxyKick",{"user":"samik"},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [ { "count": "1" } ], "bb" ] ] CLI: doveadm proxy kick samik
doveadm logs errors
fetch errors log
paraments:
{ "command": "logErrors", "parameters": [ { "name": "since", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
example:
[ [ "logErrors", {}, "a2" ] ] curl -v -u doveadm:hellodoveadm -X POST -H "Content-Type: application/json" -d '[["logErrors",{},"a2"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [ { "prefix": "stats", "text": "Stats client input error: Invalid level", "timestamp": "Dec 09 16:24:00", "type": "Error" }, { "prefix": "doveadm(127.0.0.1)", "text": "read(/var/run/dovecot/stats) unexpectedly disconnected", "timestamp": "Dec 09 16:24:00", "type": "Fatal" }, { "prefix": "stats", "text": "Stats client input error: Invalid level", "timestamp": "Dec 09 16:24:22", "type": "Error" }, { "prefix": "stats", "text": "Stats client input error: Invalid level", "timestamp": "Dec 09 16:27:48", "type": "Error" }, { "prefix": "director", "text": "Empty server list", "timestamp": "Dec 09 16:29:13", "type": "Error" }, { "prefix": "director", "text": "Invalid value for director_mail_servers setting", "timestamp": "Dec 09 16:29:13", "type": "Fatal" } ], "a2" ] ] CLI: doveadm log errors
doveadm dict
doveadm dict get
get user key value from configured dictionary
parameters:
{ "command": "dictGet", "parameters": [ { "name": "user", "type": "string" }, { "name": "dictUri", "type": "string" }, { "name": "key", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
user | String | uid of user to query | samik |
dictUri | String | optional URI for dictionary to query | |
key | String | key to query |
doveadm dict set
set user key value in configured dictionary
parameters:
{ "command": "dictSet", "parameters": [ { "name": "user", "type": "string" }, { "name": "dictUri", "type": "string" }, { "name": "key", "type": "string" }, { "name": "value", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
user | String | uid of user to modify dictionary key | samik |
dictUri | String | optional URI for dictionary to modify | |
key | String | dictionary key to modify | |
value | string | value to set |
doveadm dict unset
unset user key value in configured dictionary
parameters:
{ "command": "dictUnset", "parameters": [ { "name": "user", "type": "string" }, { "name": "dictUri", "type": "string" }, { "name": "key", "type": "string" } ] }
parameters:
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
user | String | uid of user to modify dictionary key | |
dictUri | String | optional URI for dictionary to modify | |
key | String | dictionary key to unset |
doveadm dict inc
increase users key value in dictionary
parameters:
{ "command": "dictInc", "parameters": [ { "name": "user", "type": "string" }, { "name": "dictUri", "type": "string" }, { "name": "key", "type": "string" }, { "name": "difference", "type": "integer" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
user | String | optional URI for dictionary to modify | |
key | String | dictionary key to increase | |
difference | integer | increment value |
doveadm dict iter
list user keys in dictionary
parameters:
{ "command": "dictIter", "parameters": [ { "name": "user", "type": "string" }, { "name": "exact", "type": "boolean" }, { "name": "recurse", "type": "boolean" }, { "name": "noValue", "type": "boolean" }, { "name": "dictUri", "type": "string" }, { "name": "prefix", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
user | String | uid of user to modify dictionary key | |
dictUri | String | optional URI for dictionary to modify | |
exact | Boolean | list only exact matches | |
recurce | Boolean | do recursive search | |
noValue | Boolean | list also keys that have no value set | |
prefix | String | search only keys with given prefix |
doveadm fs
doveadm fs get
get object from storage
parameters:
{ "command": "fsGet", "parameters": [ { "name": "fsDriver", "type": "string" }, { "name": "fsArgs", "type": "string" }, { "name": "path", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
fsDriver | String | filesystem driver to use | |
fsArgs | String | filesystem driver arguments to use | |
path | String | object path in filesystem to fetch |
doveadm fs put
put object to storage
parameters:
{ "command": "fsPut", "parameters": [ { "name": "hash", "type": "string" }, { "name": "fsDriver", "type": "string" }, { "name": "fsArgs", "type": "string" }, { "name": "inputPath", "type": "string" }, { "name": "path", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
hash | string | ||
fsDriver | String | filesystem driver to use | |
fsArgs | String | filesystem driver arguments to use | |
inputPath | String | source object path in local filesystem | |
path | String | object path filesystem to put |
doveadm fs copy
copy object in storage
parameters:
{ "command": "fsCopy", "parameters": [ { "name": "fsDriver", "type": "string" }, { "name": "fsArgs", "type": "string" }, { "name": "sourcePath", "type": "string" }, { "name": "destinationPath", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
fsDriver | String | filesystem driver to use | |
fsArgs | String | filesystem driver arguments to use | |
sourcePathh | String | source object path | |
Destination path | String | destination object path in filesystem |
doveadm fs stat
fetch fs driver statistics
parameters:
{ "command": "fsStat", "parameters": [ { "name": "fsDriver", "type": "string" }, { "name": "fsArgs", "type": "string" }, { "name": "path", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
fsDriver | String | filesystem driver to use | |
fsArgs | String | filesystem driver arguments to use | |
path | String | object path in filesystem fetch statistics for |
doveadm fs metadata
get filesystem object metadata
parameters:
{ "command": "fsMetadata", "parameters": [ { "name": "fsDriver", "type": "string" }, { "name": "fsArgs", "type": "string" }, { "name": "path", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
fsDriver | String | filesystem driver to use | |
fsArgs | String | filesystem driver arguments to use | |
path | String | object path in filesystem fetch statistics for |
doveadm fs delete
delete object from storage
{ "command": "fsDelete", "parameters": [ { "name": "recursive", "type": "boolean" }, { "name": "maxParallel", "type": "integer" }, { "name": "fsDriver", "type": "string" }, { "name": "fsArgs", "type": "string" }, { "name": "path", "type": "array" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
fsDriver | String | filesystem driver to use | |
fsArgs | String | filesystem driver arguments to use | |
path | String | object path in filesystem fetch statistics for | |
recursive | Boolean | do a recursive delete of path | |
maxParallel | integer | max number of parallel workers |
doveadm fs iter
list objects in given fs path
parameters:
{ "command": "fsIter", "parameters": [ { "name": "fsDriver", "type": "string" }, { "name": "fsArgs", "type": "string" }, { "name": "path", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
fsDriver | String | filesystem driver to use | |
fsArgs | String | filesystem driver arguments to use | |
path | String | path in filesystem to list |
doveadm fs iter-dirs
ist subfolders in given path
parameters:
{ "command": "fsIterDirs", "parameters": [ { "name": "fsDriver", "type": "string" }, { "name": "fsArgs", "type": "string" }, { "name": "path", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
fsDriver | String | filesystem driver to use | |
fsArgs | String | filesystem driver arguments to use | |
path | String | path in filesystem to list for subfolders |
doveadm auth cache flush
flush authentication cache for one user or all users
parameters:
{ "command": "authCacheFlush", "parameters": [ { "name": "socketPath", "type": "string" }, { "name": "user", "type": "array" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
user | String array | optional list of users in flush | [“samik”,”samitest”] |
example:
[ [ "authCacheFlush", { "user": [ "samik" ] }, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["authCacheFlush",{"user":["samik"]},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [ { "entries": "0" } ], "bb" ] ] CLI: doveadm auth cache flush samik
doveadm user
do a users lookup for an user
{ "command": "user", "parameters": [ { "name": "socketPath", "type": "string" }, { "name": "authInfo", "type": "array" }, { "name": "field", "type": "string" }, { "name": "expandField", "type": "string" }, { "name": "userdbOnly", "type": "boolean" }, { "name": "userMask", "type": "array" } ] }
parameters:
Parameter | Type | Description | example |
---|---|---|---|
authInfo | String array | auth_info specifies additional conditions for the user command. The auth_info option string has to be given as name=value pair. For multiple conditions the -x option could be supplied multiple times.
Possible names for the auth_info are: service The service for which the userdb lookup should be tested. The value may be the name of a service, commonly used with Dovecot. For example: imap, pop3 or smtp. lip The local IP address (server) for the test. rip The remote IP address (client) for the test. lport The local port, e.g. 143 rport The remote port, e.g. 24567 |
sevice=imap |
field | String | fetch only one specified field instead of all | |
expandField | String | expand configuration variable with user specific values | |
userdbOnly | Boolean | only fetch from userdb lookup and don’t process passdb | |
userMask | String array | search filter |
example:
[ [ "user", { "userMask": [ "samik" ] }, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["user",{"userMask":["samik"]},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", { "samik": { "gid": "1000", "home": "/var/vmail/samik", "junkflag": "0", "mail": "Maildir:/mails/mails/samik/Maildir", "namespace/Junk/hidden": "no", "namespace/Junk/list": "yes", "uid": "1000" } }, "bb" ] ] CLI: doveadm user samik
doveadm mailbox
doveadm mailbox metadata set
set user mailbox. metadata
parameters:
{ "command": "mailboxMetadataSet", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "mailbox", "type": "string" }, { "name": "key", "type": "string" }, { "name": "value", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | boolean | apply operation to all users | |
user | String | uid to apply metadata set | |
userFile | String | optionally fetch usernames from file. One username per line | |
key | String | metadata key to set | |
value | String | metadata value to set |
example:
[ [ "mailboxMetadataSet", { "key": "/private/comment", "mailbox": "INBOX", "user": "samik", "value": "test" }, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["mailboxMetadataSet",{"user":"samik","mailbox":"INBOX","key":"/private/comment","value":"test"},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [], "bb" ] ] CLI: doveadm mailbox metadata set –u samik INBOX /private/comment test
doveadm mailbox metadata unset
unset user mailbox metadata
parameters:
{ "command": "mailboxMetadataUnset", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "mailbox", "type": "string" }, { "name": "key", "type": "string" } ] }
parameters:
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | boolean | apply operation to all users | |
user | String | uid to apply metadata unset | |
userFile | String | optionally fetch usernames from file. One username per line | |
key | String | metadata key to unset |
example:
[ [ "mailboxMetadataUnset", { "key": "/private/comment", "mailbox": "INBOX", "user": "samik" }, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["mailboxMetadataUnset",{"user":"samik","mailbox":"INBOX","key":"/private/comment"},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [], "bb" ] ] CLI: doveadm mailbox metadata unset –u samik INBOX /private/comment
doveadm mailbox metadata get
get user mailbox metadata
parameters:
{ "command": "mailboxMetadataGet", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "mailbox", "type": "string" }, { "name": "key", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | boolean | apply operation to all users | |
user | String | uid to apply metadata get | |
userFile | String | optionally fetch usernames from file. One username per line | |
key | String | metadata key to get |
example:
[ [ "mailboxMetadataGet", { "key": "/private/comment", "mailbox": "INBOX", "user": "samik" }, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["mailboxMetadataGet",{"user":"samik","mailbox":"INBOX","key":"/private/comment"},"bb"]]' http://localhost:8080/doveadm/v1
response
[ [ "doveadmResponse", [ { "value": "plaa" } ], "bb" ] ] CLI: doveadm mailbox metadata get –u samik INBOX /private/comment
doveadm mailbox list
list user mailbox metadata for a folder
parameters:
"command": "mailboxMetadataList", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "mailbox", "type": "string" }, { "name": "keyPrefix", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | Boolean | apply operation to all users | |
user | String | uid to apply metadata get | |
userFile | String | optionally fetch usernames from file. One username per line | |
key | String | metadata key to get | |
keyPrefix | String | search prefix for keys | |
mailbox | String | mailbox to fetch metadata from |
example:
[ [ "mailboxMetadataList", { "mailbox": "INBOX", "user": "samik" }, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["mailboxMetadataList",{"user":"samik","mailbox":"INBOX"},"bb"]]' http://localhost:8080/doveadm/v1 response:
[ [ "doveadmResponse", [ { "key": "comment" }, { "key": "specialuse" } ], "bb" ] ] CLI: doveadm mailbox metadata list –u samik INBOX
doveadm mailbox status
fetch user mailbox status
parameters:
{ "command": "mailboxStatus", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "totalSum", "type": "boolean" }, { "name": "field", "type": "array" }, { "name": "mailboxMask", "type": "array" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | Boolean | apply operation to all users | |
user | String | uid to apply status fetch | |
userFile | String | optionally fetch usernames from file. One username per line | |
totalSum | boolean | ||
field | String array | fields to fetch | all |
mailboxMask | String array | fetch status on given mailboxes |
example:
[ [ "mailboxStatus", { "field": [ "all" ], "mailboxMask": [ "INBOX", "INBOX/*", "*" ], "user": "samik" }, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["mailboxStatus",{"user":"samik","field":["all"],"mailboxMask":["INBOX","INBOX/*","*"]},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [ { "guid": "21b588150b156558eb3500007afd792c", "highestmodseq": "5", "mailbox": "Junk", "messages": "0", "recent": "0", "uidnext": "1", "uidvalidity": "1483019529", "unseen": "0", "vsize": "0" }, { "guid": "21b588150b156558eb3500007afd792c", "highestmodseq": "5", "mailbox": "INBOX", "messages": "0", "recent": "0", "uidnext": "1", "uidvalidity": "1483019529", "unseen": "0", "vsize": "0" } ], "bb" ] ] CLI: doveadm mailbox status –u samik all “*”
doveadm mailbox list
fetch user folder list
parameters:
{ "command": "mailboxList", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "mutf7", "type": "boolean" }, { "name": "utf8", "type": "boolean" }, { "name": "subscriptions", "type": "boolean" }, { "name": "mailboxMask", "type": "array" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
user | String | uid to apply mailbox list | |
userFile | String | optionally fetch usernames from file. One username per line | |
mutf7 | Boolean | ||
utf8 | Boolean | fetch only certain fields instead of all | |
subscription | Boolean | ||
mailboxMask | String array | fetch list of given mailboxes |
example:
[ [ "mailboxList", { "user": "samik" }, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["mailboxList",{"user":"samik"},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [ { "mailbox": "Junk" }, { "mailbox": "INBOX" } ], "bb" ] ] CLI: doveadm mailbox list –u samik
doveadm mailbox create
parameters:
{ "command": "mailboxCreate", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "subscriptions", "type": "boolean" }, { "name": "guid", "type": "string" }, { "name": "mailbox", "type": "array" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
user | String | uid to apply mailbox create | |
userFile | String | optionally fetch usernames from file. One username per line | |
subscription | Boolean | ||
mailbox | String array | list of mailbox folders to create |
example:
[ [ "mailboxCreate", { "mailbox": [ "INBOX/myfolder" ], "user": "samik" }, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["mailboxCreate",{"user":"samik","mailbox":["INBOX/myfolder"]},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [], "bb" ] ] CLI: doveadm mailbox create –u samik INBOX/myfolder
doveadm mailbox delete
delete user mailbox folder
parameters:
{ "command": "mailboxDelete", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "requireEmpty", "type": "boolean" }, { "name": "subscriptions", "type": "boolean" }, { "name": "recursive", "type": "boolean" }, { "name": "unsafe", "type": "boolean" }, { "name": "mailbox", "type": "array" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | Boolean | apply operation to all users | |
user | String | uid to apply delete | |
userFile | String | optionally fetch usernames from file. One username per line | |
requireEmpty | Boolean | only delete if folder is empty | |
subscription | Boolean | ||
recursive | Boolean | delete also subfolders | |
unsafe | Boolean | ||
mailbox | String array | list of mailbox folders to create |
example:
[ [ "mailboxDelete", { "mailbox": [ "INBOX/myfolder" ], "user": "samik" }, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["mailboxDelete",{"user":"samik","mailbox":["INBOX/myfolder"]},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [], "bb" ] ] CLI: doveadm mailbox delete –u samik INBOX/myfolder
doveadm mailbox rename
rename user folder
parameters:
{ "command": "mailboxRename", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "subscriptions", "type": "boolean" }, { "name": "mailbox", "type": "string" }, { "name": "newName", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | Boolean | apply operation to all users | |
user | String | uid to apply mailbox rename | |
userFile | String | optionally fetch usernames from file. One username per line | |
subscriptions | Boolean | ||
newName | String | mailbox new name | |
mailbox | String | mailbox to rename |
example:
[ [ "mailboxRename", { "mailbox": "INBOX/myfolder", "newName": "INBOX/myfoldertoo", "user": "samik" }, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["mailboxRename",{"user":"samik","mailbox":"INBOX/myfolder","newName":"INBOX/myfoldertoo"},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [], "bb" ] ] CLI: doveadm mailbox rename –u samik INBOX/myfolder INBOX/myfoldertoo
doveadm mailbox subscribe
subscribe user to a mailbox
parameters:
{ "command": "mailboxSubscribe", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "mailbox", "type": "array" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | Boolean | apply operation to all users | |
user | String | uid to apply subscribe | |
userFile | String | optionally fetch usernames from. One username per line | |
mailbox | String | mailbox to subscribe |
example:
[ [ "mailboxSubscribe", { "mailbox": "INBOX/myfoldertoo", "user": "samik" }, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["mailboxSubscribe",{"user":"samik","mailbox":"INBOX/myfoldertoo"},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [], "bb" ] ] CLI: doveadm mailbox subscribe –u samik INBOX/myfoldertoo
doveadm mailbox unsubscribe
unsubscribe user from an folder
parameters:
{ "command": "mailboxUnsubscribe", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "mailbox", "type": "array" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | Boolean | apply operation to all users | |
user | String | uid to apply unsubscribe | |
userFile | String | optionally fetch usernames from. One username per line | |
mailbox | String | mailbox to unsubscribe |
example:
[ [ "mailboxUnsubscribe", { "mailbox": "INBOX/myfoldertoo", "user": "samik" }, "bb" ] ] # curl -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["mailboxUnsubscribe",{"user":"samik","mailbox":"INBOX/myfoldertoo"},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [], "bb" ] ] CLI: doveadm mailbox unsubscribe –u samik INBOX/myfoldertoo
doveadm mailbox update
update user mailbox information
parameters:
{ "command": "mailboxUpdate", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "mailboxGuid", "type": "string" }, { "name": "uidValidity", "type": "string" }, { "name": "minNextUid", "type": "string" }, { "name": "minFirstRecentUid", "type": "string" }, { "name": "minHighestModseq", "type": "string" }, { "name": "minHighestPvtModseq", "type": "string" }, { "name": "mailbox", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | Boolean | apply operation to all users | |
user | String | uid to apply update | |
userFile | String | optionally fetch usernames from. One username per line | |
mailbox | String | mailbox to unsubscribe | |
mailboxGuid | String | set mailbox guid | |
uidValidity | String | set mailbox uidvalidity | |
minNextuid | String | set mailbox minimum next uid | |
minFirstRecentuid | String | set mailbox minimum recent uid | |
minHighestModseq | String | ||
minHighestPvtModseq | String |
doveadm mailbox save
save mail into users mailbox
parameters:
{ "command": "save", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "mailbox", "type": "string" }, { "name": "file", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | Boolean | apply operation to all users | |
user | String | uid of user to save mail into | |
userFile | String | optionally fetch usernames from file. One username per line | |
mailbox | String | mailbox to unsubscribe | |
file | String | mail to inject |
example:
[ [ "save", { "file": "From: Joulu Pukki <joulu.pukki@korvatunturi.fi>\nSubject: plaa\n\nmail body\n", "mailbox": "INBOX/myfoldertoo", "user": "samik" }, "bb" ] ] # curl -v -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["save",{"user":"samik","mailbox":"INBOX/myfoldertoo","file":"From: Joulu Pukki <joulu.pukki@korvatunturi.fi>\nSubject: plaa\n\nmail body\n"},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [], "bb" ] ]
doveadm fetch
fetch data from user mailbox
parameters:
{ "command": "fetch", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "field", "type": "array" }, { "name": "query", "type": "array" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | Boolean | apply operation to all users | |
user | String | uid of user to fetch data | |
userFile | String | optionally fetch usernames from file. One username per line | |
field | String array | fields to fetch. Supported fields as of dovecot 2.2.26: hdr.<name> body.<section> binary.<section> user mailbox mailbox-guid seq uid guid flags modseq hdr body body.snippet text text.utf8 size.physical size.virtual date.received date.sent date.saved date.received.unixtime date.sent.unixtime date.saved.unixtime imap.envelope imap.body imap.bodystructure pop3.uidl pop3.order refcount storageid | |
query | String array | search query to user |
example:
[ [ "fetch", { "field": [ "text" ], "query": [ "mailbox", "INBOX/myfoldertoo" ], "user": "samik" }, "bb" ] ] # curl -v -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["fetch",{"user":"samik","field":["text"],"query":["mailbox","INBOX/myfoldertoo"]},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [ { "text": "From: Joulu Pukki <joulu.pukki@korvatunturi.fi>\nSubject: plaa\n\nmail body\n" } ], "bb" ] ] CLI: doveadm fetch –u samik “text” mailbox INBOX/myfoldertoo
doveadm index
index user mailbox folder or folders
parameters:
{ "command": "index", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "queue", "type": "boolean" }, { "name": "maxRecent", "type": "string" }, { "name": "mailboxMask", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | Boolean | apply operation to all users | |
user | String | uid of user to index | |
userFile | String | optionally fetch usernames from file. One username per line | |
query | Boolean | max number of recent mails to index | |
maxRecent | String | max number of recent mails to index | |
mailboxMask | String | mailbox search mask to apply indexing into |
example:
[ [ "index", { "mailboxMask": "INBOX*", "user": "samik" }, "bb" ] ] # curl -v -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["index",{"user":"samik","mailboxMask":"INBOX*"},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [], "bb" ] ] CLI: doveadm index –u samik “INBOX*”
doveadm altmove
move mails between primary and alternative mailbox storage locations. Applicable to mdbox and sdbox mailbox formats only
parameters:
{ "command": "altmove", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "reverse", "type": "boolean" }, { "name": "query", "type": "array" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | Boolean | apply operation to all users | |
user | String | uid of user to apply move | |
userFile | String | optionally fetch usernames from file. One username per line | |
reverse | Boolean | search query to apply to mail move |
example:
[ [ "altmove", { "query": [ "mailbox", "INBOX/myfoldertoo", "savedbefore", "since", "30d" ], "reverse": 0, "user": "samik" }, "bb" ] ] # curl -v -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["altmove",{"user":"samik","reverse":0,"query":["mailbox","INBOX/myfoldertoo","savedbefore","since","30d"]},"bb"]]' http://localhost:8080/doveadm/v1
doveadm deduplicate
This command is used to expunge duplicated messages in mailboxes
parameters:
{ "command": "deduplicate", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "byMsgid", "type": "boolean" }, { "name": "query", "type": "array" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | Boolean | apply operation to all users | |
user | String | uid of user to deduplicate | |
userFile | String | optionally fetch usernames from file. One username per line | |
byMsgId | Boolean | deduplicate by Message-ID instead of guid | |
query | String array | search query to apply to deduplicate |
doveadm expunge
Expunge messages matching given search query
parameters:
{ "command": "expunge", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "deleteEmptyMailbox", "type": "boolean" }, { "name": "query", "type": "array" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | Boolean | apply operation to all users | |
user | String | uid of user to expunge | |
userFile | String | optionally fetch usernames from file. One username per line | |
deleteEmptyMailbox | Boolean | delete also mailbox if it’s empty after expunge has been applied | |
query | String array | search query to apply to expunge |
doveadm flags
add, remove or replace messages' flags
doveadm flags add
add flag to a message or messages
parameters:
{ "command": "flagsAdd", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "flag", "type": "array" }, { "name": "query", "type": "array" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | Boolean | apply operation to all users | |
user | String | uid of user to add flags | |
userFile | String | optionally fetch usernames from file. One username per line | |
flag | String array | list of flags to add | |
query | String array | search query to apply to flag add |
doveadm flags remove
remove flags from message or messages
parameters:
{ "command": "flagsRemove", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "flag", "type": "array" }, { "name": "query", "type": "array" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | Boolean | apply operation to all users | |
user | String | uid of user to add flags | |
userFile | String | optionally fetch usernames from file. One username per line | |
flag | String array | list of flags to remove | |
query | String array | search query to apply to flag remove |
doveadm flags replace
Replace flags with another flag in message or messages. Replaces all current flags with the ones in the parameter list
parameters:
{ "command": "flagsReplace", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "flag", "type": "array" }, { "name": "query", "type": "array" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | Boolean | apply operation to all users | |
user | String | uid of user to replace flags | |
userFile | String | optionally fetch usernames from file. One username per line | |
flag | String array | list of flags to replace with | |
query | String array | search query to apply to flag replace |
doveadm import
Import messages matching given search query
parameters:
{ "command": "import", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "subscribe", "type": "boolean" }, { "name": "sourceLocation", "type": "string" }, { "name": "destParentMailbox", "type": "string" }, { "name": "query", "type": "array" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | Boolean | apply operation to all users | |
user | String | uid of user to apply import | |
userFile | String | optionally fetch usernames from file. One username per line | |
subscribe | boolean | when enabled possible newly created folders are also subscibed | |
sourceLocation | String | location of source mailboxes | |
destParentMailbox | String | destination parent mailbox where to import | |
query | String array | search query for messages to import |
doveadm force-resync
Under certain circumstances it may happen, that dovecot is unable to automatically solve problems with mailboxes. In such situations the force-resync command may be helpful. It tries to fix all problems. For sdbox and mdbox mailboxes the storage files will be also checked.
parameters:
{ "command": "forceResync", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "mailboxMask", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | Boolean | apply operation to all users | |
userFile | String | optionally fetch usernames from file. One username per line | |
user | String | uid of user to apply resync | |
mailboxMask | String | apply forced resync on given mailboxes | INBOX* |
example:
[ [ "forceResync", { "mailboxMask": "INBOX*", "user": "samik" }, "bb" ] ] # curl -v -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["forceResync",{"user":"samik","mailboxMask":"INBOX*"},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [], "bb" ] ] CLI: doveadm force-resync –u samik “INBOX*”
doveadm purge
Remove messages with refcount=0 from mdbox files
parameters:
{ "command": "purge", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | Boolean | apply operation to all users | |
userFile | String | optionally fetch usernames from file. One username per line | |
user | String | uid of user to apply purge |
doveadm search
Show a list of mailbox GUIDs and message UIDs matching given search query
parameters:
{ "command": "search", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "query", "type": "array" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
allUsers | Boolean | apply operation to all users | |
userFile | String | optionally fetch usernames from file. One username per line | |
user | String | uid of user to apply purge | |
query | String array | search query |
example:
[ [ "search", { "query": [ "mailbox", "INBOX*", "all" ], "user": "samik" }, "bb" ] ] # curl -v -X POST -u doveadm:hellodoveadm -H "Content-Type: application/json" -d '[["search",{"user":"samik","query":["mailbox","INBOX*","all"]},"bb"]]' http://localhost:8080/doveadm/v1
response:
[ [ "doveadmResponse", [ { "mailbox-guid": "cf497f128caf7c58612200007afd792c", "uid": "1" } ], "bb" ] ] CLI: doveadm search –u samik mailbox “INBOX*” all
doveadm copy
Copy messages matching the given search query into another mailbox
parameters:
{ "command": "copy", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "destinationMailbox", "type": "string" }, { "name": "sourceType", "type": "string" }, { "name": "sourceUser", "type": "string" }, { "name": "query", "type": "array" } ] }
parameters:
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
doveadm move
Move messages matching the given search query into another mailbox
parameters:
{ "command": "move", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "destinationMailbox", "type": "string" }, { "name": "sourceType", "type": "string" }, { "name": "sourceUser", "type": "string" }, { "name": "query", "type": "array" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
doveadm fscache rescan
force fscache rescan
parameters:
{ "command": "fscacheRescan", "parameters": [ { "name": "path", "type": "string" }, { "name": "maxAge", "type": "integer" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
doveadm metacache
doveadm metacache clean
clean metacache content for given user or all users
parameters:
{ "command": "metacacheClean", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "days", "type": "integer" }, { "name": "namespace", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
doveadm metacache flush
flush metacache contents to storage for given user or all users
parameters:
{ "command": "metacacheFlush", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "namespace", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
doveadm metacache unpack
unpack metacache index bundle to target directory
parameters:
{ "command": "metacacheUnpack", "parameters": [ { "name": "bundleName", "type": "string" }, { "name": "bundle", "type": "string" }, { "name": "destinationDirectory", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
doveadm metacache flushall
flush metacache to storage for all users
parameters:
{ "command": "metacacheFlushall", "parameters": [ { "name": "socketPath", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
doveadm metacache remove
remove metacache for given mask
parameters:
{ "command": "metacacheRemove", "parameters": [ { "name": "socketPath", "type": "string" }, { "name": "mask", "type": "string" } ] }
</nowiki>
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
doveadm metacache list
list local metacache contents
parameters:
{ "command": "metacacheList", "parameters": [ { "name": "socketPath", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
doveadm obox user delete
delete user data from storage, Cassandra and local caches (metacache and fscache).
parameters:
{ "command": "oboxUserDelete", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
example:
[ [ "oboxUserDelete", { "allUsers": 0, "socketPath": "", "user": "testuser003", "userFile": "" }, "aa" ] ] # curl -v -u doveadm:hellodoveadm -X POST http://localhost:ype: application/json" -d '[["oboxUserDelete", {"allUsers":0,"user":"testuser003"}, "aa"]]'
response:
[ [ "doveadmResponse", [], "aa" ] ] CLI: doveadm obox user delete –u testuser003
doveadm sieve
Commands related to handling Sieve scripts.
doveadm sieve list
list user sieve scripts
parameters:
{ "command": "sieveList", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
doveadm sieve get
get user sieve script
parameters:
{ "command": "sieveGet", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "scriptname", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
doveadm sieve put
inject sieve script to user
parameters:
{ "command": "sievePut", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "activate", "type": "boolean" }, { "name": "scriptname", "type": "string" }, { "name": "file", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
doveadm sieve delete
delete user sieve
parameters:
{ "command": "sieveDelete", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "ignoreActive", "type": "boolean" }, { "name": "scriptname", "type": "array" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
doveadm sieve activate
activate user sieve script
parameters:
{ "command": "sieveActivate", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "scriptname", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
doveadm sieve deactivate
deactivate user sieve
parameters:
{ "command": "sieveDeactivate", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
doveadm sieve rename
rename user sieve script
parameters:
{ "command": "sieveRename", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "oldname", "type": "string" }, { "name": "newname", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
doveadm fts
Dovecot fts indexing commands.
doveadm fts lookup
query user fts indexed data
parameters:
{ "command": "ftsLookup", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "query", "type": "array" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
doveadm fts expand
{ "command": "ftsExpand", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "query", "type": "array" } ] }
parameters:
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
doveadm fts tokenize
{ "command": "ftsTokenize", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "language", "type": "string" }, { "name": "text", "type": "array" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
doveadm fts optimize
{ "command": "ftsOptimize", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "namespace", "type": "string" } ] }
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |
doveadm fts rescan
{ "command": "ftsRescan", "parameters": [ { "name": "allUsers", "type": "boolean" }, { "name": "socketPath", "type": "string" }, { "name": "user", "type": "string" }, { "name": "userFile", "type": "string" }, { "name": "namespace", "type": "string" } ] }
parameters:
Parameter | Type | Description | example |
---|---|---|---|
socketPath | String | Path to doveadm socket | /var/run/dovecot/doveadm-server |