Plesk Integration

Integrate Open-Xchange with Plesk

WORK IN PROGRESS

This document describes how to integrate Open-Xchange with Plesk.

Requirements

In order to integrate Open-Xchange with Plesk, the Open-Xchange APS package must be used. This requires the following versions of Plesk and the APS package:

• Open-Xchange APS package version 7.2 and above (Not yet available).
• Parallels Plesk Panel version 11.5 and above

Older versions are not supported.

Download

Download the APS package from the APS catalogue

Install and configure Open-Xchange

Before you continue, you have to find out your requirements on how to integrate your Plesk instance(s) with Open-Xchange. There are two possible scenarios:

One Open-Xchange installation for one Plesk Installation

You want to serve one Plesk system with one single Open-Xchange installation or you are the only one managing the Plesk servers.

One Open-Xchange installation for many Plesk systems (Reseller Mode)

You want to resell many Plesk systems but only use one single Open-Xchange installation.

Note: Finding the correct scenario is important as it is hard to change later!

The main problem is, that usually on Open-Xchange, you have ONE single "root" account to provision contexts/tenants in Open-Xchange. The name of this account is usually oxadminmaster, but it can be renamed to what ever you like. Now imagine there's a scenario where not you, but your customers should create contexts. This is usually the case when you are a reseller. In this case you do not want to hand out that single "root" account to all your customers.

Fortunately, Open-Xchange has a solution for that. It is called the Reseller_Bundle.

Roughly summarised, if you are a Reseller you most likely need Plesk_Integration#One_Open-Xchange_installation_fo_many_Plesk_systems

One Open-Xchange installation for one Plesk Installation

Follow one of the Open-Xchange installation guides to install Open-Xchange and in addition, install the following package:

open-xchange-parallels

Now follow the instructions as written here Plesk_Integration#Plesk_Configuration. In this case, the Reseller Mode has to be kept off, which is the default of the APS package. The Master Administrator login is the Open-Xchange "root" account.

One Open-Xchange installation for many Plesk systems (Reseller Mode)

Follow one of the Open-Xchange installation guides to install Open-Xchange and in addition, install the following package:

open-xchange-parallels open-xchange-admin-soap-reseller

Create and manage subadmin accounts

As explained in more details in the article about the Reseller Bundle, you have to create subadmins that you can hand over to your individual Plesk customers/resellers. This article explains on how to do that using the command line as provided by Open-Xchange. Of course the same management can be done via SOAP and via RMI.

After you finished setting up Open-Xchange including the initialisation of the restrictions, you are ready to create a subadmin account. This article assumes that your "root" account name in Open-Xchange is oxadminmaster and it's password is secret. Please do NOT use this password in your environment!

Lets create two new admin accounts:

$ /opt/open-xchange/sbin/createadmin -A oxadminmaster -P secret -u pleskcustomer1 -p secret -d "My first customer"
$ /opt/open-xchange/sbin/createadmin -A oxadminmaster -P secret -u pleskcustomer2 -p secret -d "My second customer"

The login of these customers are pleskcustomer1 and pleskcustomer2, both receive the same password secret - again, do not use this password in production.

Now to list these accounts, run

$ /opt/open-xchange/sbin/listadmin -A oxadminmaster -P secret
Id Name           Displayname        Parent Restrictions
39 pleskcustomer1 My first customer  0
40 pleskcustomer2 My second customer 0

You can apply restrictions to these accounts as well. We can for example create a third user, which is only allowed to create 100 contexts:

$ /opt/open-xchange/sbin/createadmin -A oxadminmaster -P secret -u pleskcustomer3 -p secret -d "My third customer" \
   -a Subadmin.MaxContext=100

$ /opt/open-xchange/sbin/listadmin -A oxadminmaster -P secret
Id Name           Displayname        Parent Restrictions
39 pleskcustomer1 My first customer  0
40 pleskcustomer2 My second customer 0
41 pleskcustomer3 My third customer  0      Subadmin.MaxContext=100

Please refer to the Reseller Bundle documentation for more restrictions and further details.

General Open-Xchange Configuration

Add the parameter

com.openexchange.login.formLoginWithoutAuthId=true

to /opt/open-xchange/etc/login.properties

Plesk Configuration (Admin Role)

Add Application via Application Vault

Check version requirement

Check that the version of the APS package is at least 7.2. Older versions are neither supported nor will they work in all circumstances.

Set up the Open-Xchange package

Plesk Configuration (Webmaster Role)

Once the Plesk Admin installed and configured the Open-Xchange APS package, you can e.g. assign a user the Webmaster role to install that application into one or more domains.

Debugging

• Plesk errors can be found in /usr/local/psa/admin/logs/panel.log.
• Open-Xchange errors can usually be found in /var/log/open-xchange/open-xchange.log.0.