Caldav carddav Bundles: Difference between revisions

From Open-Xchange
No edit summary
No edit summary
 
(59 intermediate revisions by 13 users not shown)
Line 1: Line 1:
= Installation and Configuration of the CalDAV- and CardDAV-bundles =
This article is valid until the version 7.10.2 of the Open Xchange Server. For newer versions please visit https://documentation.open-xchange.com/latest/middleware/miscellaneous/caldav_carddav.html


The Open-Xchange server can be accessed via it's CalDAV- and CardDAV-interfaces to allow the synchronization of Calendar- and Contact-data with external applications like the Mac OS X iCal and Address Book clients. The synchronization protocols are available and supported for all customers with a valid Open-Xchange license of Open-Xchange Server Edition and Open-Xchange Hosting Edition starting with Version 6.20.1 Rev5.
<!-- = Installation and Configuration of the CalDAV- and CardDAV-bundles =
 
The Open-Xchange server can be accessed via it's CalDAV- and CardDAV-interfaces to allow the synchronization of Calendar- and Contact-data with external applications like the Mac OS Calendar and Address Book clients.


CalDAV and CardDAV are standard protocols for the exchange of calendar data and address data respectively. The CalDAV interface publishes all the user's calendar folders via CalDAV so the user can subscribe to them in a client application. Similarly, the CardDAV interface publishes the user's contact folders. Depending on the used client, the user can either subscribe one or more folders, or access all available data in an aggregated way.  
CalDAV and CardDAV are standard protocols for the exchange of calendar data and address data respectively. The CalDAV interface publishes all the user's calendar folders via CalDAV so the user can subscribe to them in a client application. Similarly, the CardDAV interface publishes the user's contact folders. Depending on the used client, the user can either subscribe one or more folders, or access all available data in an aggregated way.  
Line 9: Line 11:


== Webserver Configuration ==
== Webserver Configuration ==
In order to redirect DAV requests to the appropiate servlets, the webserver's configuration may need to be adjusted using one of the following alternatives.
In order to redirect DAV requests to the appropiate servlets, the webserver's configuration may need to be adjusted using one of the following alternatives. Please be aware that for a working Mavericks auto configuration setup you need to have SSL enabled on the server. The non-SSL variant described below only works if you use the advanced CalDAV configuration in Mac OS X Mavericks and enter the path by hand. If you just want to enter the hostname, SSL is required. The same applies to iOS7 where SSL is always required.


=== Alternative 1: Apache vhost (recommended) ===
=== Alternative 1: Apache vhost (recommended) ===
Please edit your file /etc/apache2/ox6.conf so that ''' the existing OX configuration as well as the CalDAV/CardDav configuration are placed inside their own virtual hosts sections.'''.
Please edit your site configuration file for OX so that ''' the existing OX configuration as well as the CalDAV/CardDAV configuration are placed inside their own virtual hosts sections.'''.
 
This is an <b>example</b> where MYSERVER.TLD is the domain-name of the ox-server:


  $ vi /etc/apache2/ox6.conf
Please add the following entries before your existing <code>VirtualHost</code> entry. This is an <b>example</b> where <code>MYSERVER.TLD</code> is the domain-name of the ox-server:


  NameVirtualHost *:80
  # NameVirtualHost directive no longer has any effect since Apache >=2.4
# uncomment only for Apache Versions <2.4
#NameVirtualHost *:80
  <VirtualHost *:80>
  <VirtualHost *:80>
         ServerName dav.MYSERVER.TLD
         ServerName dav.<MYSERVER.TLD>
         ErrorLog /tmp/dav.err.log
         ErrorLog /tmp/dav.err.log
         TransferLog /tmp/dav.access.log
         TransferLog /tmp/dav.access.log
        <Proxy />
                Order allow,deny
                Allow from all
        </Proxy>
        ProxyPass / ajp://localhost:8009/servlet/dav/ smax=0 ttl=60 retry=5 # for ajp http service
        #ProxyPass / http://localhost:8080/servlet/dav/ smax=0 ttl=60 retry=5 # for grizzly http service
</VirtualHost>
<VirtualHost *:80>
        ServerName MYSERVER.TLD
        ServerAdmin webmaster@localhost
        DocumentRoot /var/www/
        <Directory /var/www/>
                AllowOverride None
                Order allow,deny
                allow from all
                RedirectMatch ^/$ /ox6/
                Options +FollowSymLinks +SymLinksIfOwnerMatch
        </Directory>
        # deflate
      AddOutputFilterByType DEFLATE text/html text/plain text/javascript application/javascript text/css text/xml application/xml text/x-js application/x-javascript
        # pre-compressed files
        AddType text/javascript .jsz
        AddType text/css .cssz
        AddType text/xml .xmlz
        AddType text/plain .po
   
   
        AddEncoding gzip .jsz .cssz .xmlz
      <Proxy balancer://oxserver-sync>
        SetEnvIf Request_URI "\.(jsz|cssz|xmlz)$" no-gzip
        Order deny,allow
        Allow from all
   
   
        ExpiresActive On
        # for grizzly http service
        BalancerMember http://localhost:8009 timeout=100 smax=0 ttl=60 retry=60 loadfactor=50 route=OX1
        # uncomment this entry if you have a clustered setup and want to use the other nodes too
        #BalancerMember http://<ip-of-other-host>:8009 timeout=100 smax=0 ttl=60 retry=60 loadfactor=50 route=OX2
        SetEnv proxy-initial-not-pooled
        SetEnv proxy-sendchunked
      </Proxy>
   
   
        <Location /ox6>
      ProxyPass / balancer://oxserver-sync/servlet/dav/
                # Expires (via ExpiresByType to override global settings)
                ExpiresByType image/gif "access plus 6 months"
                ExpiresByType image/png "access plus 6 months"
                ExpiresByType image/jpg "access plus 6 months"
                ExpiresByType image/jpeg "access plus 6 months"
                ExpiresByType text/css "access plus 6 months"
                ExpiresByType text/html "access plus 6 months"
                ExpiresByType text/xml "access plus 6 months"
                ExpiresByType text/javascript "access plus 6 months"
                ExpiresByType text/x-js "access plus 6 months"
                ExpiresByType application/x-javascript "access plus 6 months"
                ExpiresDefault "access plus 6 months"
                Header append Cache-Control "private"
                Header unset Last-Modified
                Header unset Vary
                # Strip version
                RewriteEngine On
                RewriteRule v=\w+/(.+) $1 [L]
                # Turn off ETag
                Header unset ETag
                FileETag None
        </Location>
   
   
        <Location /ox6/ox.html>
                ExpiresByType text/html "now"
                ExpiresDefault "now"
                Header unset Last-Modified
                Header set Cache-Control "no-store, no-cache, must-revalidate, post-check=0, pre-check=0"
                # Turn off ETag
                Header unset ETag
                FileETag None
        </Location>
        <Location /ox6/index.html>
                ExpiresByType text/html "now"
                ExpiresDefault "now"
                Header unset Last-Modified
                Header set Cache-Control "no-store, no-cache, must-revalidate, post-check=0, pre-check=0"
                # Turn off ETag
                Header unset ETag
                FileETag None
        </Location>
  </VirtualHost>
  </VirtualHost>


If you use this method, you have to make sure that dav.MYSERVER.TLD is reachable, your dns configuration need an entry for this name. Take care of the the dav.* logfiles, the example writes them without logrotation to /tmp.
If you use this method, you have to make sure that <code>dav.<MYSERVER.TLD></code> is reachable, your DNS configuration needs an entry for this name. Take care of the the dav.* logfiles, the example writes them without logrotation to <code>/tmp</code>.
 
Please note the <code>NameVirtualHost</code> directive is needed to be able to specify multiple virtual hosts for the same IP. The differentiation is only done by the given <code>ServerName</code>. This implies that you need two server names, so the virtual host entry for the existing ox site configuration needs to be also enriched by a <code>ServerName</code> if not already present. If you access the system without one of the given <code>ServerName</code>s so e.g. via the IP the system will pick the corresponding one by order (in this case the DAV part first. If you want it to work differently please change the order accordingly.


=== Alternative 2: Apache useragent detection ===
=== Alternative 2: Apache useragent detection ===
For environments where it is inconvenient to setup a vhost there is the possibility to redirect to relevant servlets another way: Via useragent detection. This is not recommended for the following reason: Per definition this is a whitelist-approach and any client sending a useragent-string not explicitly listed in the configuration will not be able to connect . Useragent-strings may also change between different versions of an application or may even be actively changed into something non-standard.
For environments where it is inconvenient to setup a vhost there is the possibility to redirect to relevant servlets another way: Via useragent detection. This is not recommended for the following reason: Per definition this is a whitelist-approach and any client sending a useragent-string not explicitly listed in the configuration will not be able to connect . Useragent-strings may also change between different versions of an application or may even be actively changed into something non-standard.


   $ vi /etc/apache2/ox6.conf
   $ vi <your-ox-site-configuration-file>


   RewriteEngine On
   RewriteEngine On
   RewriteCond %{HTTP_USER_AGENT}      Calendar          [OR]
   RewriteCond %{HTTP_USER_AGENT}      Calendar          [OR]
  RewriteCond %{HTTP_USER_AGENT}      Reminders          [OR]
   RewriteCond %{HTTP_USER_AGENT}      DataAccess        [OR]
   RewriteCond %{HTTP_USER_AGENT}      DataAccess        [OR]
   RewriteCond %{HTTP_USER_AGENT}      DAVKit            [OR]
   RewriteCond %{HTTP_USER_AGENT}      DAVKit            [OR]
  RewriteCond %{HTTP_USER_AGENT}      DAVx5              [OR]
  RewriteCond %{HTTP_USER_AGENT}      OpenSync          [OR]
  RewriteCond %{HTTP_USER_AGENT}      "DAVdroid"        [OR]
   RewriteCond %{HTTP_USER_AGENT}      Lightning          [OR]
   RewriteCond %{HTTP_USER_AGENT}      Lightning          [OR]
  RewriteCond %{HTTP_USER_AGENT}      Thunderbird        [OR]
   RewriteCond %{HTTP_USER_AGENT}      Adresboek          [OR]
   RewriteCond %{HTTP_USER_AGENT}      Adresboek          [OR]
   RewriteCond %{HTTP_USER_AGENT}      dataaccessd        [OR]
   RewriteCond %{HTTP_USER_AGENT}      dataaccessd        [OR]
Line 119: Line 66:
   RewriteCond %{HTTP_USER_AGENT}      Adressbuch        [OR]
   RewriteCond %{HTTP_USER_AGENT}      Adressbuch        [OR]
   RewriteCond %{HTTP_USER_AGENT}      AddressBook        [OR]
   RewriteCond %{HTTP_USER_AGENT}      AddressBook        [OR]
   RewriteCond %{HTTP_USER_AGENT}      Address%20Book    [OR]
   RewriteCond %{HTTP_USER_AGENT}      Address\ Book      [OR]
   RewriteCond %{HTTP_USER_AGENT}      CalendarStore      [OR]
   RewriteCond %{HTTP_USER_AGENT}      CalendarStore      [OR]
   RewriteCond %{HTTP_USER_AGENT}      CoreDAV
   RewriteCond %{HTTP_USER_AGENT}      CalendarAgent      [OR]
   RewriteRule (.*)                  ajp://localhost:8009/servlet/dav$1    [P] # for ajp http service
  RewriteCond %{HTTP_USER_AGENT}      CalDAV%20Sync%20Adapter [OR]
   #RewriteRule (.*)                  http://localhost:8080/servlet/dav$1    [P] # for grizzly http service
  RewriteCond %{HTTP_USER_AGENT}      CalDavSynchronizer [OR]
  RewriteCond %{HTTP_USER_AGENT}      accountsd          [OR]
  RewriteCond %{HTTP_USER_AGENT}      "eM Client"        [OR]
  RewriteCond %{HTTP_USER_AGENT}      "OX Sync"          [OR]
  RewriteCond %{HTTP_USER_AGENT}      CalDav            [OR]
   RewriteCond %{HTTP_USER_AGENT}      CoreDAV            [OR]
   RewriteCond %{HTTP_USER_AGENT}      remindd
  RewriteCond %{HTTP_USER_AGENT}      "!Open-Xchange Calendar Feed Client"
  RewriteRule (.*)                  http://localhost:8009/servlet/dav$1    [P] # for grizzly http service


'''Note:''' The address book app on OSX 10.6 uses a localized user-agent string. If you're expecting clients with non-english language settings, you need to add the translated user-agent string to these rewrite rules. For example: "Adressbuch" for german OSX clients.
'''Note:''' The address book app on OSX 10.6 uses a localized user-agent string. If you're expecting clients with non-english language settings, you need to add the translated user-agent string to these rewrite rules. For example: "Adressbuch" for german OSX clients.


'''Note:''' Depending on the specific configuration, such a global definition of the rewrite rules might not be appropriate. However, the rules may also be defined inside a <code>Directory</code> context. More details are available at http://httpd.apache.org/docs/current/mod/mod_rewrite.html#rewriterule.
== Autodiscovery ==
By providing some DNS service name registrations for your domain and adding an additional rewrite-rule to the webserver's configuration, it's possible for some clients to automatically discover the account settings by just providing the user's e-mail address and password. The procedure is specified in [http://tools.ietf.org/html/rfc6764 RFC 6764].
The following example illustrates the DNS entries where MYSERVER.TLD would be the domain name of the ox-server, both for CalDAV and CardDAV via HTTP and HTTPS on the virtual host dav.MYSERVER.TLD:
_caldavs._tcp.MYSERVER.TLD.      10800 IN SRV      10 1 443 dav.MYSERVER.TLD.
_caldav._tcp.MYSERVER.TLD.      10800 IN SRV      10 1  80 dav.MYSERVER.TLD.
_carddavs._tcp.MYSERVER.TLD.    10800 IN SRV      10 1 443 dav.MYSERVER.TLD.
_carddav._tcp.MYSERVER.TLD.      10800 IN SRV      10 1  80 dav.MYSERVER.TLD.
Additionally, a rewrite-rule similar to the following example should be added to the webserver configuration of the virtual host to enable the bootstrapping process. The rewrite target must be the root of your DAV server.
The well-known aliases should be added for your DAV vhost and on the vhost serving the host matching the mail domain:
RewriteEngine On
RewriteCond %{REQUEST_URI} ^/\.well-known/caldav  [OR]
RewriteCond %{REQUEST_URI} ^/\.well-known/carddav
RewriteRule (.*) / [L,R]
In the case of not serving the DAV service on the vhost root additionally some DNS TXT records are recommended:
_caldavs._tcp.MYSERVER.TLD.      10800 IN TXT  path=/servlet/dav
_caldav._tcp.MYSERVER.TLD.      10800 IN TXT  path=/servlet/dav
_carddavs._tcp.MYSERVER.TLD.    10800 IN TXT  path=/servlet/dav
_carddav._tcp.MYSERVER.TLD.      10800 IN TXT  path=/servlet/dav
== Installation on OX App Suite ==
=== Debian GNU/Linux 9.0 ===


== Which packages do I need? ==
Add the following entry to /etc/apt/sources.list.d/open-xchange.list if not already present:
To get CalDAV and CardDAV up and running you need the following packages:


* open-xchange-webdav-directory - Assembles the *DAV interfaces into a common tree. This is needed for publishing certain properties so clients accept the OX is a WebDAV Server.
deb https://software.open-xchange.com/products/appsuite/stable/backend/DebianStretch/ /
* open-xchange-webdav-acl - The WebDAV equivalent of the /ajax/user interface. Allows clients to discover the current and other users and their addressbooks and calendars.
* open-xchange-carddav - The CardDAV interface exposing the users addressbook via carddav
* open-xchange-caldav - The CalDAV inteface exposing the users calendars via caldav


# if you have a valid maintenance subscription, please uncomment the
# following and add the ldb account data to the url so that the most recent
# packages get installed
# deb https://[CUSTOMERID:PASSWORD]@software.open-xchange.com/products/appsuite/stable/backend/updates/DebianStretch/ /


{{InstallPlugin|pluginname=open-xchange-caldav open-xchange-carddav open-xchange-webdav-acl open-xchange-webdav-directory |sopath=updates}}
and run


$ apt-get update
$ apt-get install open-xchange-dav


== Installation on Open-Xchange v6.22 ==  
=== Debian GNU/Linux 10.0 ===


=== Debian GNU/Linux 6.0 ===
Add the following entry to /etc/apt/sources.list.d/open-xchange.list if not already present:


Add the following entry to /etc/apt/sources.list if not already present:
deb https://software.open-xchange.com/products/appsuite/stable/backend/DebianBuster/ /


  deb http://software.open-xchange.com/OX6/6.22/6.22.0/backend/DebianSqueeze/all/
  # if you have a valid maintenance subscription, please uncomment the
# following and add the ldb account data to the url so that the most recent
# packages get installed
# deb https://[CUSTOMERID:PASSWORD]@software.open-xchange.com/products/appsuite/stable/backend/updates/DebianBuster/ /


and run
and run


  $ apt-get update
  $ apt-get update
  $ apt-get install open-xchange-caldav open-xchange-carddav open-xchange-webdav-acl open-xchange-webdav-directory
  $ apt-get install open-xchange-dav


=== SUSE Linux Enterprise Server 11 ===
=== SUSE Linux Enterprise Server 12 (valid until 7.10.3)===


Add the package repository using zypper if not already present:
Add the package repository using zypper if not already present:


  $ zypper ar http://software.open-xchange.com/OX6/6.22/6.22.0/backend/SLES11 ox
  $ zypper ar https://software.open-xchange.com/products/appsuite/7.10.3/backend/SLE_12 ox
 
If you have a valid maintenance subscription, please run the following command and add the ldb account data to the url so that the most recent packages get installed:
 
$ zypper ar https://[CUSTOMERID:PASSWORD]@software.open-xchange.com/products/appsuite/7.10.3/backend/updates/SLES11 ox-updates


and run
and run


  $ zypper ref
  $ zypper ref
  $ zypper in open-xchange-caldav open-xchange-carddav open-xchange-webdav-acl open-xchange-webdav-directory
  $ zypper in open-xchange-dav


=== RedHat Enterprise Linux 6 ===
=== RedHat Enterprise Linux 6 (valid until 7.10.3)===


Start a console and create a software repository file if not already present:
Start a console and create a software repository file if not already present:
Line 172: Line 168:
  [ox]
  [ox]
  name=Open-Xchange
  name=Open-Xchange
  baseurl=http://software.open-xchange.com/OX6/6.22/6.22.0/backend/RHEL6/
  baseurl=https://software.open-xchange.com/products/appsuite/7.10.3/backend/RHEL6/
  gpgkey=http://software.open-xchange.com/oxbuildkey.pub
  gpgkey=https://software.open-xchange.com/oxbuildkey.pub
  enabled=1
  enabled=1
  gpgcheck=1
  gpgcheck=1
  metadata_expire=0m
  metadata_expire=0m
# if you have a valid maintenance subscription, please uncomment the
# following and add the ldb account data to the url so that the most recent
# packages get installed
# [ox-updates]
# name=Open-Xchange Updates
# baseurl=https://[CUSTOMERID:PASSWORD]@software.open-xchange.com/products/appsuite/7.10.3/backend/updates/RHEL6/
# gpgkey=https://software.open-xchange.com/oxbuildkey.pub
# enabled=1
# gpgcheck=1
# metadata_expire=0m


and run
and run


  $ yum update
  $ yum update
  $ yum install open-xchange-caldav open-xchange-carddav open-xchange-webdav-acl open-xchange-webdav-directory
  $ yum install open-xchange-dav


=== RedHat Enterprise Linux 5 ===
===RedHat Enterprise Linux 7 ===


Start a console and create a software repository file if not already present:
Start a console and create a software repository file if not already present:
Line 191: Line 198:
  [ox]
  [ox]
  name=Open-Xchange
  name=Open-Xchange
  baseurl=http://software.open-xchange.com/OX6/6.22/6.22.0/backend/RHEL5/
  baseurl=https://software.open-xchange.com/products/appsuite/stable/backend/RHEL7/
  gpgkey=http://software.open-xchange.com/oxbuildkey.pub
  gpgkey=https://software.open-xchange.com/oxbuildkey.pub
  enabled=1
  enabled=1
  gpgcheck=1
  gpgcheck=1
  metadata_expire=0m
  metadata_expire=0m
# if you have a valid maintenance subscription, please uncomment the
# following and add the ldb account data to the url so that the most recent
# packages get installed
# [ox-updates]
# name=Open-Xchange Updates
# baseurl=https://[CUSTOMERID:PASSWORD]@software.open-xchange.com/products/appsuite/stable/backend/updates/RHEL7/
# gpgkey=https://software.open-xchange.com/oxbuildkey.pub
# enabled=1
# gpgcheck=1
# metadata_expire=0m


and run
and run


  $ yum update
  $ yum update
  $ yum install open-xchange-caldav open-xchange-carddav open-xchange-webdav-acl open-xchange-webdav-directory
  $ yum install open-xchange-dav


=== CentOS 5 ===
===CentOS 6 (valid until 7.10.3)===


Start a console and create a software repository file if not already present:
Start a console and create a software repository file if not already present:
Line 210: Line 228:
  [ox]
  [ox]
  name=Open-Xchange
  name=Open-Xchange
  baseurl=http://software.open-xchange.com/OX6/6.22/6.22.0/backend/RHEL5/
  baseurl=https://software.open-xchange.com/products/appsuite/7.10.3/backend/RHEL6/
  gpgkey=http://software.open-xchange.com/oxbuildkey.pub
  gpgkey=https://software.open-xchange.com/oxbuildkey.pub
  enabled=1
  enabled=1
  gpgcheck=1
  gpgcheck=1
  metadata_expire=0m
  metadata_expire=0m
# if you have a valid maintenance subscription, please uncomment the
# following and add the ldb account data to the url so that the most recent
# packages get installed
# [ox-updates]
# name=Open-Xchange Updates
# baseurl=https://[CUSTOMERID:PASSWORD]@software.open-xchange.com/products/appsuite/7.10.3/backend/updates/RHEL6/
# gpgkey=https://software.open-xchange.com/oxbuildkey.pub
# enabled=1
# gpgcheck=1
# metadata_expire=0m


and run
and run


  $ yum update
  $ yum update
  $ yum install open-xchange-caldav open-xchange-carddav open-xchange-webdav-acl open-xchange-webdav-directory
  $ yum install open-xchange-dav


=== CentOS 6 ===
===CentOS 7===


Start a console and create a software repository file if not already present:
Start a console and create a software repository file if not already present:
Line 229: Line 258:
  [ox]
  [ox]
  name=Open-Xchange
  name=Open-Xchange
  baseurl=http://software.open-xchange.com/OX6/6.22/6.22.0/backend/RHEL6/
  baseurl=https://software.open-xchange.com/products/appsuite/stable/backend/RHEL7/
  gpgkey=http://software.open-xchange.com/oxbuildkey.pub
  gpgkey=https://software.open-xchange.com/oxbuildkey.pub
  enabled=1
  enabled=1
  gpgcheck=1
  gpgcheck=1
  metadata_expire=0m
  metadata_expire=0m
# if you have a valid maintenance subscription, please uncomment the
# following and add the ldb account data to the url so that the most recent
# packages get installed
# [ox-updates]
# name=Open-Xchange Updates
# baseurl=https://[CUSTOMERID:PASSWORD]@software.open-xchange.com/products/appsuite/stable/backend/updates/RHEL7/
# gpgkey=https://software.open-xchange.com/oxbuildkey.pub
# enabled=1
# gpgcheck=1
# metadata_expire=0m


and run
and run


  $ yum update
  $ yum update
  $ yum install open-xchange-caldav open-xchange-carddav open-xchange-webdav-acl open-xchange-webdav-directory
  $ yum install open-xchange-dav


== CalDAV Configuration ==
== CalDAV Configuration ==


The following configuration options are available in the configuration files caldav.properties and caldav.yml:
The following configuration options are available in the configuration files <code>caldav.properties</code> and <code>caldav.yml</code>:


===com.openexchange.caldav.enabled===
===com.openexchange.caldav.enabled===
The property '''com.openexchange.caldav.enabled''' governs whether a user has access to the CalDAV interface. This can be configured along the config cascade, in the default setting, everyone that has access to the infostore also has access to caldav. This is achieved in the following way:
The property '''com.openexchange.caldav.enabled''' governs whether a user has access to the CalDAV interface. This can be configured along the config cascade, in the default setting, everyone that has access to the infostore also has access to caldav. This is achieved in the following way:


/opt/open-xchange/etc/groupware/caldav.properties:
/opt/open-xchange/etc/caldav.properties:
   com.openexchange.caldav.enabled=false
   com.openexchange.caldav.enabled=false


/opt/open-xchange/etc/groupware/contextSets/caldav.yml
/opt/open-xchange/etc/contextSets/caldav.yml
   premium:
   premium:
       com.openexchange.caldav.enabled: true
       com.openexchange.caldav.enabled: true
       withTags: ucInfostore
       withTags: ucInfostore


This means: In general CalDAV is turned off, but using the contextSets feature of the config cascade it is turned on for everyone that has infostore access.
 
This means: In general CalDAV is turned off, but using the <code>contextSets</code> feature of the config cascade it is turned on for everyone that has infostore access.


===com.openexchange.caldav.tree===
===com.openexchange.caldav.tree===
Line 277: Line 318:
Similarly to CalDAV, the property '''com.openexchange.carddav.enabled''' governs whether CardDAV is available for a certain user. This is configured exactly like CalDAV with the config cascade only enabling this for users that have access to the infostore:
Similarly to CalDAV, the property '''com.openexchange.carddav.enabled''' governs whether CardDAV is available for a certain user. This is configured exactly like CalDAV with the config cascade only enabling this for users that have access to the infostore:


/opt/open-xchange/etc/groupware/carddav.properties:
/opt/open-xchange/etc/carddav.properties:
   com.openexchange.carddav.enabled=false
   com.openexchange.carddav.enabled=false


/opt/open-xchange/etc/groupware/contextSets/carddav.yml
/opt/open-xchange/etc/contextSets/carddav.yml
   premium:
   premium:
       com.openexchange.carddav.enabled: true
       com.openexchange.carddav.enabled: true
Line 298: Line 339:


===com.openexchange.carddav.reducedAggregatedCollection===
===com.openexchange.carddav.reducedAggregatedCollection===
Specifies if all visible folders are used to create the aggregated collection, or if a reduced set of folders only containing the global addressbook and the personal contacts folders should be used. This setting only influences the aggregated collection that is used for clients that don't support multiple collections. Possible values are 'true' and 'false.
Specifies if all visible folders are used to create the aggregated collection, or if a reduced set of folders only containing the global addressbook and the personal contacts folders should be used. This setting only influences the aggregated collection that is used for clients that don't support multiple collections. Possible values are 'true' and 'false. -->
 
[[Category: Clients]]
[[Category: Administrator]]
[[Category: AppSuite]]

Latest revision as of 10:50, 8 December 2021

This article is valid until the version 7.10.2 of the Open Xchange Server. For newer versions please visit https://documentation.open-xchange.com/latest/middleware/miscellaneous/caldav_carddav.html